✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ALG-015

Factorisation of a Quadratic Polynomial

Factorisation of a quadratic polynomial is the process of expressing a degree-two polynomial as a product of simpler polynomial factors. When its roots are r1 and r2, the polynomial can be represented as a(x - r1)(x - r2), where a is its non-zero leading coefficient.

\(ax^2 + bx + c = a(x - r1)(x - r2), \text{ where } a \neq 0 and r1, r2 are the roots.\)

What this formula means

Definition

Factorisation of a quadratic polynomial is the process of expressing a degree-two polynomial as a product of simpler polynomial factors. When its roots are r1 and r2, the polynomial can be represented as a(x - r1)(x - r2), where a is its non-zero leading coefficient.

Interpretation

The factorised form shows the roots directly because the polynomial becomes zero when x equals either r1 or r2. Expanding the product recovers the original quadratic polynomial. The roots may be real or complex depending on the coefficient values and the number system considered.

Physical Significance

This is a mathematical technique rather than a physical law. It is useful for solving quadratic equations, identifying zeros of quadratic functions, simplifying rational expressions, and understanding the structure of polynomial models.

Coordinate Representations

General Factorised Form

ax^2 + bx + c = a(x - r1)(x - r2)

Expanded Form

a(x - r1)(x - r2) = ax^2 - a(r1 + r2)x + ar1r2

Root Relationships

r1 + r2 = -b/a; r1r2 = c/a

Discriminant

Δ = b^2 - 4ac

Repeated Root Form

If r1 = r2 = r, then ax^2 + bx + c = a(x - r)^2

Scientific principle

Principle

Quadratic factorisation follows from the distributive law and the relationship between polynomial roots and linear factors. The coefficients of the factorised expression are determined by the sum and product of its roots.

Derivation

StepExplanationExpression

1

Consider a quadratic polynomial with a non-zero leading coefficient.

P(x) = ax^2 + bx + c, where a ≠ 0

2

Suppose the two roots of the quadratic are r1 and r2, counted with multiplicity.

P(r1) = 0 and P(r2) = 0

3

By the factor theorem, the corresponding linear expressions are factors of the polynomial.

P(x) = a(x - r1)(x - r2)

4

Expand the two linear factors using the distributive law.

a(x - r1)(x - r2) = a[x^2 - (r1 + r2)x + r1r2]

5

Distribute the leading coefficient a.

ax^2 - a(r1 + r2)x + ar1r2

6

Compare the coefficients with ax^2 + bx + c.

-a(r1 + r2) = b; ar1r2 = c

7

Rearrange the coefficient relationships to obtain the sum and product of the roots.

r1 + r2 = -b/a; r1r2 = c/a

Result

A quadratic polynomial with roots r1 and r2 can be factorised as a(x - r1)(x - r2). Over the complex numbers every quadratic with a non-zero leading coefficient has such a factorisation; over the real numbers, real linear factors exist when the discriminant is non-negative.

Variables and their meanings

SymbolMeaningDescription

a

Leading coefficient

The non-zero coefficient of x^2. It determines the leading scale of the quadratic polynomial.

b

Linear coefficient

The coefficient multiplying x in the standard quadratic expression.

c

Constant term

The constant term of the quadratic polynomial.

x

Polynomial variable

The variable whose values are used to evaluate the quadratic polynomial.

r1

First root

One solution of the quadratic equation ax^2 + bx + c = 0.

r2

Second root

The other solution of the quadratic equation, counted with multiplicity.

Δ

Discriminant

The expression b^2 - 4ac, which determines whether the roots are distinct real, repeated real, or non-real complex when the coefficients are real.

SI units and conversions

Si Unit

Not applicable as a universal SI unit; quadratic factorisation is an algebraic identity.

Dimensional Formula

No fixed dimensional formula. If x has a physical dimension X and all terms in ax^2 + bx + c are dimensionally compatible, then a, b, and c must carry the corresponding coefficient dimensions. Each factor x - r1 and x - r2 must also be dimensionally consistent.

Unit Explanation

In pure algebra, all variables and coefficients are treated as mathematical quantities without physical units. In a physical model, the roots r1 and r2 must have the same dimension as x, so the differences x - r1 and x - r2 are meaningful. The coefficients must be assigned dimensions that make all terms of the quadratic polynomial compatible.

Unit Conversions

ConversionApplication

If x, r1, and r2 represent lengths, each linear factor has units of length.

Used in mathematical models where a quadratic polynomial is constructed from length-valued variables.

If all variables and coefficients are dimensionless, the entire factorisation is dimensionless.

Ordinary algebraic factorisation and equation solving.

Conditions of use

  • The polynomial must have degree exactly two, so a ≠ 0.

  • The factorised form uses roots r1 and r2 satisfying ax^2 + bx + c = 0.

  • The roots must be considered in a number system containing the required solutions.

  • Over the real numbers, factorisation into real linear factors requires b^2 - 4ac ≥ 0.

  • Over the complex numbers, every quadratic polynomial with a non-zero leading coefficient can be factorised into two linear factors, counting repeated roots.

  • The leading coefficient a must be retained unless the polynomial is monic.

Limitations and assumptions

  • A quadratic polynomial cannot be treated as a genuine degree-two polynomial when a = 0; in that case the expression is linear or constant.

  • A quadratic with negative discriminant and real coefficients cannot be expressed as a product of real linear factors, although it can be factorised over the complex numbers.

  • The factorised form depends on knowing or determining the roots.

  • Integer factorisation methods may not produce simple integer factors even when a polynomial has rational or real roots.

  • Numerical approximations of roots may produce approximate rather than exact factorisations.

  • The formula assumes that the factors and coefficients belong to a compatible commutative algebraic system.

Step-by-step worked examples

ProblemGivenSolutionAnswer

Factorise x^2 - 5x + 6.

  • a = 1

  • b = -5

  • c = 6

  • Polynomial: x^2 - 5x + 6

StepExplanationCalculation

1

Find two numbers whose product is 6 and whose sum is -5.

(-2)(-3) = 6; -2 + (-3) = -5

2

Split the middle term using the two numbers.

x^2 - 2x - 3x + 6

3

Group the terms into two pairs and factorise each pair.

x(x - 2) - 3(x - 2)

4

Take the common binomial factor.

(x - 2)(x - 3)

5

Check by expanding the factors.

(x - 2)(x - 3) = x^2 - 5x + 6

(x - 2)(x - 3)

Factorise 2x^2 + 7x + 3.

  • a = 2

  • b = 7

  • c = 3

  • Polynomial: 2x^2 + 7x + 3

StepExplanationCalculation

1

Multiply the leading coefficient by the constant term.

a × c = 2 × 3 = 6

2

Find two numbers whose product is 6 and whose sum is 7.

6 × 1 = 6; 6 + 1 = 7

3

Split the middle term using 6x and x.

2x^2 + 6x + x + 3

4

Group the terms and factorise each group.

2x(x + 3) + 1(x + 3)

5

Extract the common binomial factor.

(2x + 1)(x + 3)

6

Expand to verify that the original polynomial is recovered.

(2x + 1)(x + 3) = 2x^2 + 7x + 3

(2x + 1)(x + 3)

Real-world applications

ApplicationExplanation

Solving quadratic equations

Writing a quadratic polynomial as a product of linear factors makes it possible to use the zero-product property to determine its roots.

Graph analysis

The factorised form identifies the x-intercepts of a quadratic function because its zeros occur where one of the linear factors equals zero.

Simplifying rational expressions

Factorisation can reveal common factors in the numerator and denominator of rational expressions, allowing valid algebraic simplification.

Mathematical modelling

Quadratic models occur in optimisation, geometry, and motion-related mathematics. Factorisation can reveal the input values at which a model reaches zero.

Polynomial analysis

The factorised form helps identify repeated roots, compare polynomial structures, and connect coefficients with root relationships.

Formula Meaning

Definition

Factorisation of a quadratic polynomial is the process of expressing a degree-two polynomial as a product of simpler polynomial factors. When its roots are r1 and r2, the polynomial can be represented as a(x - r1)(x - r2), where a is its non-zero leading coefficient.

Interpretation

The factorised form shows the roots directly because the polynomial becomes zero when x equals either r1 or r2. Expanding the product recovers the original quadratic polynomial. The roots may be real or complex depending on the coefficient values and the number system considered.

Physical Significance

This is a mathematical technique rather than a physical law. It is useful for solving quadratic equations, identifying zeros of quadratic functions, simplifying rational expressions, and understanding the structure of polynomial models.

Coordinate Representations

General Factorised Form

ax^2 + bx + c = a(x - r1)(x - r2)

Expanded Form

a(x - r1)(x - r2) = ax^2 - a(r1 + r2)x + ar1r2

Root Relationships

r1 + r2 = -b/a; r1r2 = c/a

Discriminant

Δ = b^2 - 4ac

Repeated Root Form

If r1 = r2 = r, then ax^2 + bx + c = a(x - r)^2

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source