✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-AST-2285

Friedmann Critical Expansion Relation

The Friedmann equation relates the expansion rate of the universe to its total energy density, spatial curvature, and cosmological constant. The critical density is the density required for a spatially flat universe at a given expansion rate.

\(H^{2} = (8\pi G/3)\rho - kc^{2}/a^{2} + \Lambda_{\mathrm{c}}^{2}/3\)

What this formula means

The Friedmann equation relates the expansion rate of the universe to its total energy density, spatial curvature, and cosmological constant. The critical density is the density required for a spatially flat universe at a given expansion rate.

Scientific principle

Principle

In general relativity, a homogeneous and isotropic universe is described by the Friedmann–Lemaître–Robertson–Walker spacetime. Applying Einstein's field equations to this geometry produces the Friedmann expansion equation.

Derivation

  • 1. Describe the large-scale universe using a scale factor a(t) and spatial-curvature parameter k.

  • 2. Define the Hubble parameter as H = ȧ/a.

  • 3. Apply the Einstein field equations to a homogeneous and isotropic cosmological model.

  • 4. The first Friedmann equation gives H² = (8πG/3)ρ − kc²/a² + Λc²/3, when ρ represents mass-equivalent density.

  • 5. For a spatially flat universe with k = 0, the curvature term vanishes.

  • 6. The critical density associated with the expansion rate is defined by ρ_c = 3H²/(8πG).

  • 7. If the cosmological constant is included as a separate term, the matter and radiation density needed for flatness is adjusted according to the chosen density convention.

Final Result

H² = (8πG/3)ρ − kc²/a² + Λc²/3

Critical Density

ρ_c = 3H²/(8πG)

Flat Universe Relation

H² = (8πG/3)ρ + Λc²/3, for k = 0

Interpretation

The expansion rate depends on the universe's energy content, spatial curvature, and cosmological constant.

Variables and their meanings

SymbolMeaningUnit

H

Hubble expansion parameter

s⁻¹

G

Gravitational constant

m³/(kg·s²)

ρ

Total mass-equivalent density of matter and radiation in the stated convention

kg/m³

k

Spatial-curvature parameter

Dimensionless when the scale factor carries length

c

Speed of light in vacuum

m/s

a

Cosmological scale factor

Convention-dependent; often dimensionless

Λ

Cosmological constant

m⁻²

ρ_c

Critical density for a spatially flat model at the specified H

kg/m³

SI units and conversions

Hubble Parameter

s⁻¹

Density

kg/m³

Gravitational Constant

m³/(kg·s²)

Speed Of Light

m/s

Cosmological Constant

m⁻²

Critical Density

kg/m³

Conditions of use

  • The standard Friedmann equation assumes a homogeneous and isotropic cosmological model.

  • The density convention must be stated clearly; mass-equivalent density is used in the displayed equation.

  • The scale-factor and curvature conventions must be consistent.

  • The Hubble parameter is time-dependent and must correspond to the epoch being considered.

  • The cosmological constant must not be counted twice if it has already been included as an energy-density contribution.

Limitations and assumptions

  • The equation describes the large-scale universe and is not a local gravitational equation for an individual galaxy or star.

  • It assumes the cosmological principle on sufficiently large scales.

  • The equation alone does not specify the evolution of each density component; additional conservation and equation-of-state relations are required.

  • Different conventions for the scale factor, curvature, and energy density can change the apparent form of the equation.

  • The critical density is not necessarily equal to the matter density alone when radiation and dark energy are included.

Step-by-step worked examples

ProblemSolutionAnswer

Calculate the critical density for a Hubble parameter H = 70 km/(s·Mpc), using G = 6.6743 × 10⁻¹¹ m³/(kg·s²).

  • Convert H into SI units:

  • H = 70,000 m/s ÷ 3.0857 × 10²² m.

  • H ≈ 2.268 × 10⁻¹⁸ s⁻¹.

  • Use: ρ_c = 3H²/(8πG).

  • ρ_c = 3(2.268 × 10⁻¹⁸)²/[8π(6.6743 × 10⁻¹¹)].

  • ρ_c ≈ 9.20 × 10⁻²⁷ kg/m³.

The critical density is approximately 9.20 × 10⁻²⁷ kg/m³.

A cosmological model has H = 2.0 × 10⁻¹⁸ s⁻¹. Calculate its critical density.

  • Given: H = 2.0 × 10⁻¹⁸ s⁻¹.

  • G = 6.6743 × 10⁻¹¹ m³/(kg·s²).

  • ρ_c = 3H²/(8πG).

  • ρ_c = 3(2.0 × 10⁻¹⁸)²/[8π(6.6743 × 10⁻¹¹)].

  • ρ_c ≈ 7.15 × 10⁻²⁷ kg/m³.

The critical density is approximately 7.15 × 10⁻²⁷ kg/m³.

Real-world applications

  • Cosmological expansion modeling

  • Estimating the critical density of the universe

  • Spatial-curvature studies

  • Dark-energy research

  • Observational cosmology

  • Comparison of cosmological models with astronomical data

Formula Meaning

The Friedmann equation relates the expansion rate of the universe to its total energy density, spatial curvature, and cosmological constant. The critical density is the density required for a spatially flat universe at a given expansion rate.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source