✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-BIO-1107

Diffusion Rate Across a Membrane

The diffusion rate across a membrane is the amount of a substance transported through the membrane per unit time under a concentration difference, assuming steady-state diffusion and approximately constant membrane properties.

\(Rate = (D_{\mathrm{m}} K A / \Delta x)(C_{1} - C_{2})\)

What this formula means

Definition

The diffusion rate across a membrane is the amount of a substance transported through the membrane per unit time under a concentration difference, assuming steady-state diffusion and approximately constant membrane properties.

Biological Significance

The rate depends on the membrane's area, thickness, diffusion coefficient, partitioning of the substance into the membrane, and concentration difference across the membrane.

Interpretation

  • A larger membrane area generally increases the total diffusion rate.

  • A larger concentration difference increases the rate.

  • A higher membrane diffusion coefficient increases the rate.

  • A higher membrane-to-solution partition coefficient increases the concentration of the substance within the membrane and can increase transport.

  • A thicker membrane decreases the rate under the simple steady-state model.

Distinction From Flux

Diffusion flux is the rate per unit area, whereas total diffusion rate is the flux multiplied by membrane area.

Scientific principle

Principle

Steady-state diffusion through a uniform membrane follows Fick's First Law. The membrane concentration gradient is related to the concentration difference in the surrounding solutions through the partition coefficient.

Derivation

  • For diffusion through a uniform membrane, flux magnitude is J = D_m(ΔC_m/Δx).

  • Assume the membrane-solution partition relation is C_m = K C_solution at each interface.

  • The concentration difference within the membrane is therefore approximately K(C₁ − C₂).

  • Substitute into the flux expression: J = D_m K(C₁ − C₂)/Δx.

  • Total diffusion rate is flux multiplied by membrane area A.

  • Therefore, Rate = (D_m K A/Δx)(C₁ − C₂).

Final Result

Rate = (D_m K A / Δx)(C₁ − C₂)

Variables and their meanings

Rate

Amount of substance transported across the membrane per unit time.

D m

Diffusion coefficient of the substance within the membrane.

K

Membrane-to-solution partition coefficient, defined consistently for the concentration convention.

A

Membrane surface area available for diffusion.

Δx

Membrane thickness or diffusion path length.

C₁

Concentration in the solution on side 1.

C₂

Concentration in the solution on side 2.

J

Diffusion flux through the membrane.

SI units and conversions

Si Unit Of Rate

mol s⁻¹

Diffusion Coefficient Unit

m² s⁻¹

Area Unit

m²

Thickness Unit

m

Concentration Unit

mol m⁻³

Partition Coefficient Unit

Dimensionless when the same concentration units are used on both sides of the partition relation.

Dimensional Formula Of Rate

[N T⁻¹]

Explanation

The expression D_m A(C₁ − C₂)/Δx has units mol s⁻¹ when K is dimensionless.

Conditions of use

  • The membrane is treated as uniform with constant thickness and diffusion coefficient.

  • Transport is assumed to be at steady state.

  • The partition coefficient is treated as constant.

  • The concentration difference is maintained across the membrane.

  • The model assumes passive diffusion without active transport or significant bulk flow.

Limitations and assumptions

  • Real biological membranes contain proteins and lipid regions with different transport properties.

  • Transport through channels and carriers may not follow this simple passive-diffusion expression.

  • The equation does not account for saturation kinetics of carrier-mediated transport.

  • For charged solutes, an electrical potential difference may contribute to the driving force.

  • Concentration polarization or unstirred boundary layers can make the effective concentration difference smaller than the bulk-solution difference.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A membrane has D_m = 1.0 × 10⁻¹⁰ m² s⁻¹, K = 2, area A = 0.01 m², thickness 1.0 × 10⁻⁶ m, and a concentration difference of 5 mol m⁻³. Calculate the diffusion rate.

D m

1.0 × 10⁻¹⁰ m² s⁻¹

K

2

A

0.01 m²

Δx

1.0 × 10⁻⁶ m

C₁ − C₂

5 mol m⁻³

  • Use Rate = (D_m K A/Δx)(C₁ − C₂).

  • Substitute: Rate = [(1.0 × 10⁻¹⁰ × 2 × 0.01)/(1.0 × 10⁻⁶)] × 5.

  • The transport coefficient is 2.0 × 10⁻⁶ m³ s⁻¹.

  • Rate = 2.0 × 10⁻⁶ × 5.

  • Rate = 1.0 × 10⁻⁵ mol s⁻¹.

Diffusion rate = 1.0 × 10⁻⁵ mol s⁻¹.

A membrane has permeability P = 4.0 × 10⁻⁶ m s⁻¹, area 0.002 m², and a concentration difference of 3 mol m⁻³. Calculate the total diffusion rate.

P

4.0 × 10⁻⁶ m s⁻¹

A

0.002 m²

C₁ − C₂

3 mol m⁻³

  • Use Rate = PA(C₁ − C₂).

  • Substitute: Rate = (4.0 × 10⁻⁶)(0.002)(3).

  • Multiply: Rate = 2.4 × 10⁻⁸ mol s⁻¹.

Diffusion rate = 2.4 × 10⁻⁸ mol s⁻¹.

Real-world applications

  • Estimating passive oxygen and carbon dioxide transport across biological membranes.

  • Understanding how membrane thickness affects gas exchange.

  • Explaining the role of membrane area in epithelial exchange surfaces.

  • Comparing permeability of different substances through lipid membranes.

  • Studying passive transport in artificial membranes and laboratory models.

Formula Meaning

Definition

The diffusion rate across a membrane is the amount of a substance transported through the membrane per unit time under a concentration difference, assuming steady-state diffusion and approximately constant membrane properties.

Biological Significance

The rate depends on the membrane's area, thickness, diffusion coefficient, partitioning of the substance into the membrane, and concentration difference across the membrane.

Interpretation

  • A larger membrane area generally increases the total diffusion rate.

  • A larger concentration difference increases the rate.

  • A higher membrane diffusion coefficient increases the rate.

  • A higher membrane-to-solution partition coefficient increases the concentration of the substance within the membrane and can increase transport.

  • A thicker membrane decreases the rate under the simple steady-state model.

Distinction From Flux

Diffusion flux is the rate per unit area, whereas total diffusion rate is the flux multiplied by membrane area.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source