✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-BIO-1108

Membrane Permeability Coefficient

The membrane permeability coefficient quantifies how readily a substance crosses a membrane under a concentration difference. In the simple homogeneous-membrane model, it depends on the substance's diffusion coefficient within the membrane, its partition coefficient, and membrane thickness.

\(P = (K D_{\mathrm{m}}) / \Delta x; J = P(C_{1} - C_{2})\)

What this formula means

Definition

The membrane permeability coefficient quantifies how readily a substance crosses a membrane under a concentration difference. In the simple homogeneous-membrane model, it depends on the substance's diffusion coefficient within the membrane, its partition coefficient, and membrane thickness.

Biological Significance

Different substances cross biological membranes at different rates. Small non-polar molecules often partition into lipid bilayers more readily than highly charged or strongly polar substances, although membrane transport proteins can substantially alter permeability.

Interpretation

  • Higher membrane diffusion coefficient generally increases permeability.

  • Higher membrane-to-solution partition coefficient generally increases permeability.

  • Greater membrane thickness generally decreases permeability.

  • The permeability coefficient relates concentration difference to flux, not directly to total transport rate.

Alternative Definition

Under steady-state passive transport, P = J/(C₁ − C₂), using the magnitude of flux and concentration difference.

Scientific principle

Principle

The permeability coefficient combines diffusion within a membrane and partitioning at the membrane-solution interfaces into a single transport parameter.

Derivation

  • Fick's First Law gives the membrane flux magnitude as J = D_m(ΔC_m/Δx).

  • Assume the membrane concentration is related to the external solution concentration by C_m = K C_solution.

  • The concentration difference within the membrane is approximately K(C₁ − C₂).

  • Substitute to obtain J = (K D_m/Δx)(C₁ − C₂).

  • Define the permeability coefficient as P = K D_m/Δx.

  • Therefore, J = P(C₁ − C₂).

Final Result

P = (K D_m)/Δx

Variables and their meanings

P

Membrane permeability coefficient.

K

Membrane-to-solution partition coefficient.

D m

Diffusion coefficient within the membrane.

Δx

Membrane thickness or effective diffusion path length.

J

Diffusion flux.

C₁

Concentration on side 1 of the membrane.

C₂

Concentration on side 2 of the membrane.

SI units and conversions

Si Unit

m s⁻¹

Dimensional Formula

[L T⁻¹]

Explanation

K is dimensionless when concentrations use consistent units. D_m has units m² s⁻¹ and Δx has units m, giving P units m s⁻¹.

Related Units

J is commonly expressed in mol m⁻² s⁻¹ and concentration in mol m⁻³.

Conditions of use

  • The membrane is treated as a homogeneous layer with a defined effective thickness.

  • The diffusion coefficient and partition coefficient are approximately constant.

  • Transport is passive and approximately steady-state.

  • The concentration difference is measured using the same concentration convention on both sides.

  • The membrane has no significant active transport contribution in the model.

Limitations and assumptions

  • Biological membranes are heterogeneous and may not have one uniform diffusion coefficient.

  • Protein channels and carriers can create transport pathways that are not represented by the simple lipid-partition model.

  • Carrier-mediated transport may show saturation and cannot always be described by a constant P.

  • Permeability can depend on temperature, membrane composition, solute charge, and membrane state.

  • For ions, electrical potential differences must be considered in addition to concentration differences.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A solute has a membrane diffusion coefficient of 3.0 × 10⁻¹¹ m² s⁻¹, partition coefficient 4, and membrane thickness 6.0 × 10⁻⁸ m. Calculate the permeability coefficient.

D m

3.0 × 10⁻¹¹ m² s⁻¹

K

4

Δx

6.0 × 10⁻⁸ m

  • Use P = KD_m/Δx.

  • Substitute: P = [4 × (3.0 × 10⁻¹¹)]/(6.0 × 10⁻⁸).

  • Numerator = 1.2 × 10⁻¹⁰ m² s⁻¹.

  • Divide: P = 2.0 × 10⁻³ m s⁻¹.

Membrane permeability coefficient = 2.0 × 10⁻³ m s⁻¹.

A membrane has a permeability coefficient of 2.0 × 10⁻⁵ m s⁻¹. The concentration difference across it is 8 mol m⁻³. Calculate the magnitude of the diffusion flux.

P

2.0 × 10⁻⁵ m s⁻¹

C₁ − C₂

8 mol m⁻³

  • Use J = P(C₁ − C₂).

  • Substitute: J = (2.0 × 10⁻⁵)(8).

  • Therefore, J = 1.6 × 10⁻⁴ mol m⁻² s⁻¹.

Diffusion flux magnitude = 1.6 × 10⁻⁴ mol m⁻² s⁻¹.

Real-world applications

  • Comparing the permeability of different molecules through lipid bilayers.

  • Studying how membrane composition influences passive transport.

  • Understanding gas exchange across cell membranes.

  • Evaluating membrane transport in artificial vesicles and experimental systems.

  • Separating passive permeability from transporter-mediated movement.

Formula Meaning

Definition

The membrane permeability coefficient quantifies how readily a substance crosses a membrane under a concentration difference. In the simple homogeneous-membrane model, it depends on the substance's diffusion coefficient within the membrane, its partition coefficient, and membrane thickness.

Biological Significance

Different substances cross biological membranes at different rates. Small non-polar molecules often partition into lipid bilayers more readily than highly charged or strongly polar substances, although membrane transport proteins can substantially alter permeability.

Interpretation

  • Higher membrane diffusion coefficient generally increases permeability.

  • Higher membrane-to-solution partition coefficient generally increases permeability.

  • Greater membrane thickness generally decreases permeability.

  • The permeability coefficient relates concentration difference to flux, not directly to total transport rate.

Alternative Definition

Under steady-state passive transport, P = J/(C₁ − C₂), using the magnitude of flux and concentration difference.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source