✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-BIO-1109

Net Osmotic Water Movement

Net osmotic water movement describes the net volume of water crossing a membrane per unit area per unit time in response to a difference in water potential. The direction and magnitude depend on the water-potential difference and the hydraulic permeability of the membrane.

\(J_{\mathrm{v}} = L_{\mathrm{p}}(\Psi_{\mathrm{out}} - \Psi_{\mathrm{in}})\)

What this formula means

Definition

Net osmotic water movement describes the net volume of water crossing a membrane per unit area per unit time in response to a difference in water potential. The direction and magnitude depend on the water-potential difference and the hydraulic permeability of the membrane.

Sign Convention

In this entry, inward water flux is defined as positive. Therefore, Ψ_out is the water potential outside the cell and Ψ_in is the water potential inside the cell. A positive Ψ_out − Ψ_in predicts inward water movement.

Biological Significance

  • Water tends to move from the side with higher water potential to the side with lower water potential.

  • If the external water potential is higher than the internal water potential, water tends to enter the cell.

  • If the external water potential is lower than the internal water potential, water tends to leave the cell.

  • If the two water potentials are equal, there is no net osmotic water movement under the idealized model.

Total Volume Rate

The total volume flow rate is Q_v = A J_v, where A is the membrane area.

Scientific principle

Principle

A water-potential difference provides the thermodynamic driving force for water movement, while membrane hydraulic permeability determines how readily water can cross the membrane.

Derivation

  • Define inward water flux as positive.

  • The driving difference for inward movement is the external water potential minus the internal water potential.

  • Assume water flux is proportional to this difference under near-equilibrium conditions.

  • Use L_p as the proportionality coefficient, representing hydraulic permeability.

  • The resulting relation is J_v = L_p(Ψ_out − Ψ_in).

  • Multiply by membrane area to obtain the total volume flow rate Q_v = A J_v.

Final Result

J_v = L_p(Ψ_out − Ψ_in)

Variables and their meanings

J v

Volume flux of water, defined as positive inward.

L p

Hydraulic permeability coefficient of the membrane.

Ψ out

Water potential outside the cell.

Ψ in

Water potential inside the cell.

Q v

Total volume flow rate of water.

A

Membrane area available for water movement.

SI units and conversions

Si Unit Of Volume Flux

m s⁻¹

Unit Of Hydraulic Permeability

m Pa⁻¹ s⁻¹

Water Potential Unit

Pa

Unit Of Total Volume Rate

m³ s⁻¹

Dimensional Formula Of Volume Flux

[L T⁻¹]

Explanation

L_p has units m Pa⁻¹ s⁻¹. Multiplying it by a water-potential difference in Pa gives a volume flux in m s⁻¹. Multiplying by area gives m³ s⁻¹.

Conditions of use

  • The inward-positive sign convention defined in this entry must be followed.

  • The membrane must permit water movement.

  • The hydraulic permeability coefficient should be approximately constant over the range considered.

  • The relation is most appropriate for near-equilibrium or linear-response conditions.

  • Water potentials on both sides must be measured using the same reference convention.

Limitations and assumptions

  • The equation is a simplified linear water-flow relation.

  • Real membranes may show time-dependent permeability because of aquaporin regulation and changes in membrane state.

  • Water movement may also be affected by hydrostatic pressure, solute reflection, and coupled solute transport.

  • The equation predicts a net flux, not the random molecular movement occurring in both directions.

  • If a more detailed membrane transport model is required, hydraulic flow and osmotic pressure contributions may need to be separated explicitly.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A cell has external water potential −0.10 MPa and internal water potential −0.40 MPa. Its hydraulic permeability is 2.0 × 10⁻¹² m Pa⁻¹ s⁻¹. Calculate the inward-positive water flux.

Ψ out

−0.10 MPa = −1.0 × 10⁵ Pa

Ψ in

−0.40 MPa = −4.0 × 10⁵ Pa

L p

2.0 × 10⁻¹² m Pa⁻¹ s⁻¹

  • Use J_v = L_p(Ψ_out − Ψ_in).

  • Calculate the water-potential difference: −1.0 × 10⁵ − (−4.0 × 10⁵) = 3.0 × 10⁵ Pa.

  • Substitute: J_v = (2.0 × 10⁻¹²)(3.0 × 10⁵).

  • Therefore, J_v = 6.0 × 10⁻⁷ m s⁻¹.

  • The positive sign indicates inward water movement.

J_v = +6.0 × 10⁻⁷ m s⁻¹; water tends to enter the cell.

The external water potential is −0.60 MPa and the internal water potential is −0.20 MPa. If L_p = 1.5 × 10⁻¹² m Pa⁻¹ s⁻¹, calculate the water flux.

Ψ out

−0.60 MPa = −6.0 × 10⁵ Pa

Ψ in

−0.20 MPa = −2.0 × 10⁵ Pa

L p

1.5 × 10⁻¹² m Pa⁻¹ s⁻¹

  • J_v = L_p(Ψ_out − Ψ_in).

  • Water-potential difference = −6.0 × 10⁵ − (−2.0 × 10⁵).

  • Difference = −4.0 × 10⁵ Pa.

  • J_v = (1.5 × 10⁻¹²)(−4.0 × 10⁵).

  • J_v = −6.0 × 10⁻⁷ m s⁻¹.

  • The negative sign indicates outward water movement under the inward-positive convention.

J_v = −6.0 × 10⁻⁷ m s⁻¹; water tends to leave the cell.

Real-world applications

  • Explaining swelling and shrinking of cells in different osmotic environments.

  • Understanding water uptake by plant cells.

  • Studying water permeability through aquaporin-containing membranes.

  • Explaining changes in cell turgor following changes in external water potential.

  • Modelling water exchange across biological and artificial membranes.

Formula Meaning

Definition

Net osmotic water movement describes the net volume of water crossing a membrane per unit area per unit time in response to a difference in water potential. The direction and magnitude depend on the water-potential difference and the hydraulic permeability of the membrane.

Sign Convention

In this entry, inward water flux is defined as positive. Therefore, Ψ_out is the water potential outside the cell and Ψ_in is the water potential inside the cell. A positive Ψ_out − Ψ_in predicts inward water movement.

Biological Significance

  • Water tends to move from the side with higher water potential to the side with lower water potential.

  • If the external water potential is higher than the internal water potential, water tends to enter the cell.

  • If the external water potential is lower than the internal water potential, water tends to leave the cell.

  • If the two water potentials are equal, there is no net osmotic water movement under the idealized model.

Total Volume Rate

The total volume flow rate is Q_v = A J_v, where A is the membrane area.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source