✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-BIO-1110

Electrochemical Gradient

An electrochemical gradient is the combined difference in chemical and electrical potential experienced by an ion across a membrane. It determines the thermodynamic tendency of the ion to move between two compartments.

\(\Delta\tilde{\mu} = RT \ln(C_{\mathrm{in}} / C_{\mathrm{out}}) + zF(\psi_{\mathrm{in}} - \psi_{\mathrm{out}})\)

What this formula means

Definition

An electrochemical gradient is the combined difference in chemical and electrical potential experienced by an ion across a membrane. It determines the thermodynamic tendency of the ion to move between two compartments.

Biological Significance

Cells use electrochemical gradients to regulate ion distribution, membrane potential, nutrient transport, nerve signalling, muscle activity, and ATP production.

Components

Chemical Contribution

RT ln(C_in/C_out) represents the chemical contribution caused by the difference in ion concentration.

Electrical Contribution

zF(ψ_in − ψ_out) represents the electrical contribution caused by the difference in electric potential across the membrane.

Sign Convention

The expression calculates the molar electrochemical potential difference for transfer of an ion from outside to inside: Δμ̃ = μ̃_in − μ̃_out. A negative value means transfer from outside to inside is thermodynamically favourable under the specified conditions.

Interpretation

  • The concentration gradient can drive ions toward the side with lower concentration.

  • The electrical gradient can attract or repel ions depending on their charge and the membrane potential.

  • The two contributions may reinforce or oppose one another.

  • An ion may move against its concentration gradient if the electrical contribution is sufficiently favourable.

Equilibrium Condition

At electrochemical equilibrium for the ion, Δμ̃ = 0.

Scientific principle

Principle

The electrochemical potential of an ion includes both its chemical potential and its electrical potential energy. The total driving force is the difference between these contributions across the membrane.

Derivation

  • For an ideal dilute solution, the chemical potential of an ion is μ = μ° + RT ln C.

  • An ion with charge number z in an electric potential ψ has an electrical contribution zFψ per mole.

  • The total electrochemical potential is therefore μ̃ = μ° + RT ln C + zFψ.

  • Calculate the difference between the inside and outside compartments.

  • The standard chemical potential term cancels when the same ion is compared in both compartments.

  • The resulting difference is Δμ̃ = RT ln(C_in/C_out) + zF(ψ_in − ψ_out).

Final Result

Δμ̃ = RT ln(C_in / C_out) + zF(ψ_in − ψ_out)

Equilibrium Relation

At equilibrium: RT ln(C_in/C_out) + zF(ψ_in − ψ_out) = 0.

Variables and their meanings

Δμ̃

Molar electrochemical potential difference for transfer from outside to inside.

R

Universal gas constant, 8.314 J mol⁻¹ K⁻¹.

T

Absolute temperature in kelvin.

C in

Ion concentration inside the cell or compartment.

C out

Ion concentration outside the cell or compartment.

Z

Signed charge number of the ion; for example, +1 for Na⁺ and −1 for Cl⁻.

F

Faraday constant, approximately 96485 C mol⁻¹.

Ψ in

Electrical potential inside the cell.

Ψ out

Electrical potential outside the cell.

SI units and conversions

Si Unit

J mol⁻¹

Dimensional Formula

[M L² T⁻² N⁻¹]

Explanation

RT has units J mol⁻¹. The logarithm is dimensionless because it contains a ratio of concentrations with identical units. F has units C mol⁻¹ and electrical potential has units J C⁻¹, so zFΔψ also has units J mol⁻¹.

Important Unit Rule

Use the same concentration units for C_in and C_out. Express electrical potential differences in volts and temperature in kelvin.

Conditions of use

  • The same ionic species must be compared on both sides of the membrane.

  • The concentration ratio must use consistent concentration units.

  • The ideal dilute-solution approximation should be reasonable, or activities should replace concentrations for non-ideal solutions.

  • The electrical potential difference must use the same reference convention on both sides.

  • The direction of transfer must remain outside to inside as defined in this entry.

  • The equation describes thermodynamic driving force, not the transport rate.

Limitations and assumptions

  • In concentrated or non-ideal solutions, ionic activities are more accurate than concentrations.

  • The equation does not specify how rapidly an ion crosses the membrane.

  • Ion channels, transporters, membrane resistance, and active pumps determine actual transport behaviour.

  • A favourable electrochemical gradient does not guarantee movement if the membrane is impermeable to the ion.

  • For coupled transport of multiple ions or molecules, the free-energy contributions of all transported species must be considered.

Step-by-step worked examples

ProblemGivenSolutionAnswer

For a monovalent cation, C_in = 10 mM and C_out = 100 mM. The inside electrical potential is −0.070 V relative to the outside. Calculate the electrochemical potential difference for transfer from outside to inside at 298 K.

Z

+1

C in

10 mM

C out

100 mM

Ψ in − ψ out

−0.070 V

R

8.314 J mol⁻¹ K⁻¹

T

298 K

F

96485 C mol⁻¹

  • Use Δμ̃ = RT ln(C_in/C_out) + zF(ψ_in − ψ_out).

  • Concentration ratio = 10/100 = 0.1.

  • Chemical contribution = (8.314)(298)ln(0.1) ≈ −5708 J mol⁻¹.

  • Electrical contribution = (+1)(96485)(−0.070) ≈ −6754 J mol⁻¹.

  • Total Δμ̃ ≈ −5708 − 6754.

  • Therefore, Δμ̃ ≈ −12462 J mol⁻¹.

Δμ̃ ≈ −12.46 kJ mol⁻¹. Transfer from outside to inside is thermodynamically favourable under the stated conditions.

A monovalent anion has C_in = 20 mM and C_out = 5 mM. The inside potential is +0.030 V relative to the outside. Calculate Δμ̃ at 298 K.

Z

−1

C in

20 mM

C out

5 mM

Ψ in − ψ out

+0.030 V

R

8.314 J mol⁻¹ K⁻¹

T

298 K

F

96485 C mol⁻¹

  • Use Δμ̃ = RT ln(C_in/C_out) + zF(ψ_in − ψ_out).

  • Concentration ratio = 20/5 = 4.

  • Chemical contribution = (8.314)(298)ln(4) ≈ +3437 J mol⁻¹.

  • Electrical contribution = (−1)(96485)(+0.030) ≈ −2895 J mol⁻¹.

  • Total Δμ̃ ≈ 3437 − 2895.

  • Therefore, Δμ̃ ≈ +542 J mol⁻¹.

Δμ̃ ≈ +0.542 kJ mol⁻¹. Transfer from outside to inside is slightly unfavourable under the stated conditions.

Real-world applications

  • Explaining sodium and potassium ion distributions across animal-cell membranes.

  • Understanding the electrical and chemical forces involved in nerve impulses.

  • Explaining proton gradients used in ATP synthesis.

  • Understanding secondary active transport such as sodium-glucose cotransport.

  • Studying ion movement through channels and transport proteins.

  • Interpreting membrane potentials and ionic equilibrium.

Formula Meaning

Definition

An electrochemical gradient is the combined difference in chemical and electrical potential experienced by an ion across a membrane. It determines the thermodynamic tendency of the ion to move between two compartments.

Biological Significance

Cells use electrochemical gradients to regulate ion distribution, membrane potential, nutrient transport, nerve signalling, muscle activity, and ATP production.

Components

Chemical Contribution

RT ln(C_in/C_out) represents the chemical contribution caused by the difference in ion concentration.

Electrical Contribution

zF(ψ_in − ψ_out) represents the electrical contribution caused by the difference in electric potential across the membrane.

Sign Convention

The expression calculates the molar electrochemical potential difference for transfer of an ion from outside to inside: Δμ̃ = μ̃_in − μ̃_out. A negative value means transfer from outside to inside is thermodynamically favourable under the specified conditions.

Interpretation

  • The concentration gradient can drive ions toward the side with lower concentration.

  • The electrical gradient can attract or repel ions depending on their charge and the membrane potential.

  • The two contributions may reinforce or oppose one another.

  • An ion may move against its concentration gradient if the electrical contribution is sufficiently favourable.

Equilibrium Condition

At electrochemical equilibrium for the ion, Δμ̃ = 0.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source