A simplified hydraulic relation for water movement through a membrane pathway. J_v is the volume flux per unit area, L_p is hydraulic permeability, and ΔP_f is the effective driving pressure. For aquaporins, this relation describes pressure-driven water flow; osmotic driving forces can also contribute.
Water Flux Through Aquaporins
A simplified hydraulic relation for water movement through a membrane pathway. J_v is the volume flux per unit area, L_p is hydraulic permeability, and ΔP_f is the effective driving pressure. For aquaporins, this relation describes pressure-driven water flow; osmotic driving forces can also contribute.
\(J_{\mathrm{v}} = L_{\mathrm{p}} \Delta P_{\mathrm{f}}\)
What this formula means
Scientific principle
Principle
Aquaporins are membrane channel proteins that facilitate rapid water movement. Water transport is driven by differences in water chemical potential, which can arise from hydrostatic pressure and osmotic pressure differences.
Derivation
For pressure-driven water flow, the volume flux is proportional to the effective pressure difference.
Introduce hydraulic permeability L_p as the proportionality coefficient.
Therefore, J_v = L_p ΔP_f.
When both hydrostatic and osmotic effects are considered, a common membrane relation is J_v = L_p(ΔP − σΔπ).
For an ideal water-selective aquaporin pathway, σ is approximately 1.
Final Result
J_v = L_p ΔP_f for a pressure-driven pathway; more generally, J_v = L_p(ΔP − σΔπ).
Variables and their meanings
J v
Volume flux of water per unit membrane area.
L p
Hydraulic permeability coefficient.
ΔP f
Effective pressure difference driving water flow.
ΔP
Hydrostatic pressure difference.
Δπ
Osmotic pressure difference.
Σ
Reflection coefficient, ranging approximately from 0 to 1.
SI units and conversions
J v
m·s⁻¹.
L p
m·Pa⁻¹·s⁻¹.
ΔP f
Pascal (Pa).
ΔP
Pa.
Δπ
Pa.
Σ
Dimensionless.
Dimensional Formula Of Jv
L T⁻¹.
Conditions of use
The pathway must permit water movement.
The effective driving pressure must be defined with a consistent direction convention.
The simple relation assumes approximately linear water flow over the pressure range considered.
For osmotic flow, the osmotic pressure difference and reflection coefficient must be included.
Limitations and assumptions
Aquaporin permeability depends on channel abundance, channel type, membrane composition and regulation.
The simple pressure-only equation does not include osmotic pressure unless it is incorporated into ΔP_f.
Water flux can be affected by cell geometry and unstirred boundary layers.
The equation does not describe individual water molecules moving through a channel.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A membrane has hydraulic permeability L_p = 2.0 × 10⁻¹² m·Pa⁻¹·s⁻¹ and an effective pressure difference of 5.0 × 10⁴ Pa. Calculate the water volume flux. |
| J_v = 1.0 × 10⁻⁷ m·s⁻¹. |
A membrane has L_p = 1.5 × 10⁻¹² m·Pa⁻¹·s⁻¹ and an effective driving pressure of 2.0 × 10⁴ Pa. Calculate the flux. |
| J_v = 3.0 × 10⁻⁸ m·s⁻¹. |
Real-world applications
Water transport across kidney cell membranes.
Water movement in plant roots and leaves.
Cell volume regulation.
Studying aquaporin function in biological membranes.
Formula Meaning
A simplified hydraulic relation for water movement through a membrane pathway. J_v is the volume flux per unit area, L_p is hydraulic permeability, and ΔP_f is the effective driving pressure. For aquaporins, this relation describes pressure-driven water flow; osmotic driving forces can also contribute.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.