✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-BIO-1148

Enzyme Immobilization Effectiveness Factor

The effectiveness factor describes how efficiently an immobilized enzyme performs relative to the intrinsic reaction rate that would be expected without internal mass-transfer limitations. For a conventional diffusion-limited porous catalyst, η is commonly between 0 and 1.

\(\eta = v_{\mathrm{observed}}/v_{\mathrm{intrinsic}}\)

What this formula means

The effectiveness factor describes how efficiently an immobilized enzyme performs relative to the intrinsic reaction rate that would be expected without internal mass-transfer limitations. For a conventional diffusion-limited porous catalyst, η is commonly between 0 and 1.

Scientific principle

Principle

Immobilized enzymes are attached to or trapped within a support material. Substrate molecules must reach the enzyme through the surrounding liquid and sometimes through pores in the support. Diffusion resistance can reduce the observed reaction rate.

Derivation

  • Let v_intrinsic represent the reaction rate expected if substrate concentration at the enzyme were equal to the bulk concentration and there were no internal diffusion limitation.

  • Let v_observed represent the actual measured rate of the immobilized enzyme system.

  • Define the effectiveness factor as the ratio of observed rate to intrinsic rate.

  • Therefore, η = v_observed/v_intrinsic.

  • If observed and intrinsic rates are equal, η = 1.

  • If diffusion limitations reduce the observed rate, η is less than 1.

Final Result

η = v_observed/v_intrinsic. For ordinary internal diffusion limitation without unusual enhancement effects, 0 < η ≤ 1.

Variables and their meanings

Η

Effectiveness factor.

V observed

Observed reaction rate of the immobilized enzyme.

V intrinsic

Intrinsic reaction rate under equivalent local substrate conditions without internal diffusion limitation.

Diffusion Limitation

Reduction in reaction rate caused by transport resistance.

SI units and conversions

Η

Dimensionless.

V observed and v intrinsic

Same rate units, such as μmol·min⁻¹.

Dimensional Formula

Dimensionless.

Conditions of use

  • Observed and intrinsic rates must be defined on the same basis.

  • The substrate concentration and environmental conditions must be appropriately controlled.

  • The intrinsic rate should account for enzyme loading and intrinsic catalytic properties.

  • The immobilized system should be evaluated under defined mixing and transport conditions.

Limitations and assumptions

  • The effectiveness factor does not independently identify whether internal or external mass transfer is limiting.

  • The value can depend on particle size, pore structure, substrate diffusivity and enzyme distribution.

  • A value below 1 does not necessarily mean that the enzyme itself has lost catalytic activity.

  • The simple ratio does not describe every reaction–diffusion geometry.

  • For some systems, observed performance can be influenced by partitioning or microenvironment effects, complicating the interpretation.

Step-by-step worked examples

ProblemSolutionAnswer

An immobilized enzyme preparation has an observed rate of 60 μmol·min⁻¹ and an intrinsic rate of 100 μmol·min⁻¹. Calculate its effectiveness factor.

  • η = v_observed/v_intrinsic.

  • η = 60/100.

  • η = 0.60.

η = 0.60, indicating that the observed rate is 60% of the intrinsic rate.

An immobilized enzyme has an effectiveness factor of 0.75 and an intrinsic reaction rate of 160 μmol·min⁻¹. Calculate its observed rate.

  • η = v_observed/v_intrinsic.

  • v_observed = η × v_intrinsic.

  • v_observed = 0.75 × 160.

  • v_observed = 120 μmol·min⁻¹.

Observed reaction rate = 120 μmol·min⁻¹.

Real-world applications

  • Designing immobilized enzyme reactors.

  • Evaluating porous enzyme-support materials.

  • Optimizing particle size and substrate diffusion.

  • Comparing free and immobilized enzyme systems.

  • Improving industrial biocatalysis.

Formula Meaning

The effectiveness factor describes how efficiently an immobilized enzyme performs relative to the intrinsic reaction rate that would be expected without internal mass-transfer limitations. For a conventional diffusion-limited porous catalyst, η is commonly between 0 and 1.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source