✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-CIR-001

Ohm's Law

For an ohmic conductor under constant physical conditions, the potential difference across it is proportional to the current through it, with resistance as the proportionality constant.

\(V = IR\)

What this formula means

Definition

For an ohmic conductor under constant physical conditions, the potential difference across it is proportional to the current through it, with resistance as the proportionality constant.

Interpretation

At fixed resistance, doubling voltage doubles current. The relationship is linear only when the conductor's resistance remains approximately constant.

Physical Significance

It is a foundational circuit relation for calculating voltage, current and resistance in resistive components.

Scientific principle

Principle

Linear current-voltage behaviour of an ohmic element.

Derivation

StepExplanationExpression

1

For an ohmic component at constant temperature, current is proportional to applied potential difference.

V ∝ I

2

Introduce the constant of proportionality, resistance R.

V = RI

3

Write the conventional form.

V = IR

4

Rearrange when solving for current or resistance.

I = V/R; R = V/I

Result

Ohm's law is V = IR for an ohmic element under specified constant conditions.

Variables and their meanings

SymbolMeaningDescription

V

Potential difference

Voltage across the component.

I

Electric current

Rate of flow of electric charge through the component.

R

Resistance

Ratio of voltage to current for the ohmic operating condition.

SI units and conversions

Si Unit

volt (V), ampere (A), ohm (Ω)

Dimensional Formula

[ML²T⁻³I⁻²] for resistance

Unit Explanation

Resistance is voltage divided by current; its SI unit is V/A = Ω.

Unit Conversions

ConversionApplication

1 kΩ = 1000 Ω

Convert kilohms to ohms.

1 mA = 10⁻³ A

Convert milliamperes to amperes.

1 μA = 10⁻⁶ A

Convert microamperes to amperes.

Conditions of use

  • The component is ohmic over the operating range.

  • Temperature and other physical conditions remain sufficiently constant.

  • Voltage and current refer to the same component and sign convention.

Limitations and assumptions

  • Many components are non-ohmic, including diodes and filament lamps over broad operating ranges.

  • Resistance can change with temperature, strain, illumination or material state.

  • The law does not by itself describe circuit topology; Kirchhoff's laws may also be required.

  • At very high frequencies, parasitic inductance and capacitance can matter.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A resistor of 12 Ω is connected across a 9 V ideal source. Find the current.

  • V = 9 V

  • R = 12 Ω

StepExplanationCalculation

1

Write Ohm's law and solve for current.

I = V/R

2

Substitute the values.

I = 9/12 A

3

Evaluate.

I = 0.75 A

The current is 0.75 A.

Real-world applications

ApplicationExplanation

Circuit design

Resistor values are selected to obtain desired currents and voltage drops.

LED circuits

A series resistor can limit current when the LED's non-ohmic behaviour is accounted for separately.

Electrical testing

Voltage-current measurements help determine resistance and identify non-ohmic behaviour.

Power systems

Resistive loads are analysed using voltage, current and resistance relationships.

Topics

  • electricity

  • circuits

  • Ohm law

  • voltage

  • current

  • resistance

  • Electricity & Circuits

Formula Meaning

Definition

For an ohmic conductor under constant physical conditions, the potential difference across it is proportional to the current through it, with resistance as the proportionality constant.

Interpretation

At fixed resistance, doubling voltage doubles current. The relationship is linear only when the conductor's resistance remains approximately constant.

Physical Significance

It is a foundational circuit relation for calculating voltage, current and resistance in resistive components.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source