✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-CIR-002

Equivalent Resistance in Series

The equivalent resistance of resistors connected in series is the sum of their individual resistances.

\(R_{s} = R_{1} + R_{2} + \cdots + R_{n}\)

What this formula means

Definition

The equivalent resistance of resistors connected in series is the sum of their individual resistances.

Interpretation

The same current passes through every series resistor, while the total voltage equals the sum of the individual voltage drops.

Physical Significance

It allows a multi-resistor series network to be replaced by one equivalent resistor when viewed from its terminals.

Scientific principle

Principle

Kirchhoff's voltage law and Ohm's law.

Derivation

StepExplanationExpression

1

In a series circuit, the current is the same through every resistor.

I₁ = I₂ = ⋯ = I

2

The total potential difference is the sum of individual drops.

V = V₁ + V₂ + ⋯ + Vₙ

3

Apply Ohm's law to each resistor.

V = IR₁ + IR₂ + ⋯ + IRₙ

4

Factor out the common current and compare with V = IRₛ.

Rₛ = R₁ + R₂ + ⋯ + Rₙ

Result

The equivalent resistance of a series combination is the arithmetic sum of all resistances.

Variables and their meanings

SymbolMeaningDescription

Rₛ

Series equivalent resistance

Single resistance that produces the same terminal voltage-current relation.

R₁, R₂, …, Rₙ

Individual resistances

Resistances of the components connected end-to-end.

I

Series current

Common current through every ideal series component.

SI units and conversions

Si Unit

ohm (Ω)

Dimensional Formula

[ML²T⁻³I⁻²]

Unit Explanation

Resistances add and retain the unit ohm.

Unit Conversions

ConversionApplication

1 kΩ = 1000 Ω

Convert kilohms to ohms.

1 MΩ = 10⁶ Ω

Convert megaohms to ohms.

Conditions of use

  • All resistors are connected in a single series path with no branching node between them.

  • The same current flows through each resistor.

  • The components can be represented by their resistances at the operating conditions.

Limitations and assumptions

  • A short circuit bypassing a resistor changes the effective network.

  • Real resistor values vary with tolerance and temperature.

  • For AC circuits with reactive components, add impedances as complex quantities rather than resistances alone.

  • The formula does not apply to parallel connections.

Step-by-step worked examples

ProblemGivenSolutionAnswer

Three resistors of 4 Ω, 6 Ω and 10 Ω are connected in series. Find the equivalent resistance.

  • R₁ = 4 Ω

  • R₂ = 6 Ω

  • R₃ = 10 Ω

StepExplanationCalculation

1

Write the series-resistance relation.

Rₛ = R₁ + R₂ + R₃

2

Substitute the values.

Rₛ = 4 + 6 + 10 Ω

3

Add the resistances.

Rₛ = 20 Ω

The equivalent series resistance is 20 Ω.

Real-world applications

ApplicationExplanation

Current-limiting networks

Series resistors set current and divide voltage.

Voltage dividers

A series resistor chain creates predictable voltage fractions.

Sensor circuits

Series resistors are used to condition signals and set measurement ranges.

Electronic prototyping

Equivalent resistance simplifies analysis of resistor strings.

Topics

  • electricity

  • circuits

  • series resistors

  • equivalent resistance

  • Kirchhoff voltage law

  • Electricity & Circuits

Formula Meaning

Definition

The equivalent resistance of resistors connected in series is the sum of their individual resistances.

Interpretation

The same current passes through every series resistor, while the total voltage equals the sum of the individual voltage drops.

Physical Significance

It allows a multi-resistor series network to be replaced by one equivalent resistor when viewed from its terminals.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source