✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-DYN-008

Kinetic Friction

Kinetic friction is the frictional force acting between two surfaces that slide relative to one another. In the ideal Coulomb friction model, its magnitude is the product of the coefficient of kinetic friction and the normal force.

\(f_{k} = \mu_{k}N\)

What this formula means

Definition

Kinetic friction is the frictional force acting between two surfaces that slide relative to one another. In the ideal Coulomb friction model, its magnitude is the product of the coefficient of kinetic friction and the normal force.

Interpretation

The kinetic friction force acts opposite to the relative sliding velocity at the contact. For a given pair of surfaces in the ideal model, its magnitude is proportional to the normal force.

Physical Significance

Kinetic friction affects the acceleration, energy loss and motion of sliding objects. It is important in braking, material handling, machinery and the analysis of objects moving across surfaces.

Mathematical Representations

Magnitude Form

fₖ = μₖN

Direction

Opposite to the relative sliding velocity at the contact

Vector Form

f⃗ₖ = −μₖN v⃗rel/|v⃗rel|

Frictional Work For Straight Sliding

Wₖ = −fₖd, when kinetic friction is constant and opposite to the displacement

Scientific principle

Principle

Coulomb's Law of Dry Kinetic Friction

Derivation

StepExplanationExpression

1

When two surfaces slide relative to each other, microscopic interactions at their contact oppose the relative motion.

fₖ ∝ N

2

For the ideal dry-friction model, the kinetic friction magnitude is approximately proportional to the normal force.

fₖ = C N

3

Represent the proportionality constant by the coefficient of kinetic friction μₖ.

fₖ = μₖN

4

Assign the direction opposite to the relative sliding velocity at the contact.

f⃗ₖ = −μₖN v⃗rel/|v⃗rel|

5

For straight sliding with constant friction opposing displacement, the work done by friction is negative.

Wₖ = −fₖd

Result

The magnitude of kinetic friction is fₖ = μₖN in the ideal Coulomb model, and its direction opposes relative sliding at the contact.

Variables and their meanings

SymbolMeaningDescription

fₖ

Kinetic friction

The magnitude of the frictional force acting during relative sliding between surfaces, measured in newtons (N).

μₖ

Coefficient of kinetic friction

A dimensionless coefficient describing the kinetic frictional interaction between the two surfaces.

N

Normal force

The contact force perpendicular to the surfaces, measured in newtons (N).

v⃗rel

Relative sliding velocity

The velocity of one contacting surface relative to the other at the contact, used to identify the friction direction.

Wₖ

Work done by kinetic friction

The energy transferred by the kinetic friction force through displacement, measured in joules (J).

d

Sliding distance

The distance travelled along a straight path when the friction magnitude remains constant, measured in metres (m).

SI units and conversions

Si Unit

newton (N)

Dimensional Formula

[M L T⁻²]

Unit Explanation

Kinetic friction is a force, so it has the same dimensions and SI unit as normal force. The coefficient μₖ is dimensionless.

Unit Conversions

ConversionApplication

1 N = 1 kg·m/s²

Expressing kinetic friction in SI units.

1 J = 1 N·m

Expressing work done by friction in joules.

μₖ is dimensionless

Using the kinetic friction coefficient without unit conversion.

Conditions of use

  • The contacting surfaces must be sliding relative to one another.

  • The coefficient of kinetic friction for the surface pair must be known or estimated.

  • The normal force must be determined correctly from the forces perpendicular to the contact surface.

  • The ideal formula is most suitable for ordinary dry sliding contact.

  • The friction direction must oppose the relative sliding velocity, not necessarily the object's motion relative to the ground.

Limitations and assumptions

  • The coefficient of kinetic friction may vary with material, surface roughness, temperature, wear and contamination.

  • The simple model often approximates kinetic friction as independent of sliding speed, but real friction can depend on speed.

  • The formula is not suitable for all lubricated, fluid, adhesive or highly deformable contact systems.

  • Kinetic friction must not be used when surfaces are not sliding relative to one another.

  • The formula gives the friction magnitude; the direction must be determined from the relative motion at the contact.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A 15 kg box slides across a horizontal floor. The coefficient of kinetic friction is 0.3. Calculate the kinetic friction force using g = 9.81 m/s².

  • m = 15 kg

  • μₖ = 0.3

  • g = 9.81 m/s²

StepExplanationCalculation

1

For a horizontal surface with no vertical acceleration or additional vertical forces, calculate the normal force.

N = mg = 15 × 9.81 = 147.15 N

2

Write the kinetic friction formula.

fₖ = μₖN

3

Substitute the known values.

fₖ = 0.3 × 147.15

4

Evaluate the friction magnitude.

fₖ = 44.145 N

The kinetic friction force has a magnitude of approximately 44.15 N and acts opposite to the sliding direction.

A box slides 6 m along a horizontal surface while experiencing a constant kinetic friction force of 12 N opposite to its displacement. Calculate the work done by friction.

  • fₖ = 12 N

  • d = 6 m

  • Angle between friction and displacement = 180°

StepExplanationCalculation

1

Use the work equation for a constant force.

W = Fd cos θ

2

Substitute the friction magnitude, displacement and angle.

Wₖ = 12 × 6 × cos 180°

3

Use cos 180° = −1.

Wₖ = 72 × (−1)

4

State the work done by friction.

Wₖ = −72 J

Kinetic friction does −72 J of work on the box.

Real-world applications

ApplicationExplanation

Vehicle Braking

Kinetic friction can act between a sliding tyre and the road during skidding, influencing the vehicle's deceleration.

Industrial Material Handling

Engineers consider kinetic friction when objects slide along conveyor systems and machine surfaces.

Mechanical Brakes

Frictional interactions between braking surfaces help convert mechanical energy into thermal energy.

Sliding Objects

The formula helps predict the resistance experienced by boxes, equipment and other objects sliding over surfaces.

Energy Analysis

The work done by kinetic friction is used to analyse mechanical energy dissipation in sliding systems.

Formula Meaning

Definition

Kinetic friction is the frictional force acting between two surfaces that slide relative to one another. In the ideal Coulomb friction model, its magnitude is the product of the coefficient of kinetic friction and the normal force.

Interpretation

The kinetic friction force acts opposite to the relative sliding velocity at the contact. For a given pair of surfaces in the ideal model, its magnitude is proportional to the normal force.

Physical Significance

Kinetic friction affects the acceleration, energy loss and motion of sliding objects. It is important in braking, material handling, machinery and the analysis of objects moving across surfaces.

Mathematical Representations

Magnitude Form

fₖ = μₖN

Direction

Opposite to the relative sliding velocity at the contact

Vector Form

f⃗ₖ = −μₖN v⃗rel/|v⃗rel|

Frictional Work For Straight Sliding

Wₖ = −fₖd, when kinetic friction is constant and opposite to the displacement

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source