✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-DYN-009

Hooke's Law for an Ideal Spring

Hooke's law states that the restoring force exerted by an ideal linear spring is proportional to its displacement from the equilibrium position and directed opposite to that displacement.

\(\vec{F}_{s} = -k\vec{x}\)

What this formula means

Definition

Hooke's law states that the restoring force exerted by an ideal linear spring is proportional to its displacement from the equilibrium position and directed opposite to that displacement.

Interpretation

When a spring is stretched or compressed within its linear elastic range, the magnitude of its restoring force increases in direct proportion to the displacement. The negative sign indicates that the spring force tends to return the spring to equilibrium.

Physical Significance

Hooke's law describes the force behaviour of ideal elastic springs. It is fundamental to analysing spring-supported systems, vibration, oscillation and many mechanical devices.

Mathematical Representations

Vector Form

F⃗ₛ = −kx⃗

One Dimensional Form

Fₛ = −kx

Magnitude Form

|Fₛ| = k|x|

Spring Constant

k = |Fₛ|/|x|

Scientific principle

Principle

Linear Elasticity and Restoring Force

Derivation

StepExplanationExpression

1

Consider an ideal spring with an equilibrium position where its net restoring force is zero.

x = 0 ⇒ Fₛ = 0

2

Within the linear elastic range, experiments show that the magnitude of the spring force is proportional to the displacement from equilibrium.

|Fₛ| ∝ |x|

3

Introduce the spring constant k as the proportionality constant.

|Fₛ| = k|x|

4

The restoring force always acts opposite to the displacement from equilibrium.

Fₛ ∝ −x

5

Combine the proportionality and direction into the signed one-dimensional equation.

Fₛ = −kx

6

For a spring in three-dimensional vector form with an isotropic linear response, express the restoring force opposite to the displacement vector.

F⃗ₛ = −kx⃗

Result

The restoring force of an ideal linear spring is F⃗ₛ = −kx⃗, valid within the spring's linear elastic range.

Variables and their meanings

SymbolMeaningDescription

F⃗ₛ

Spring restoring force

The force exerted by the spring, directed toward its equilibrium position, measured in newtons (N).

k

Spring constant

A measure of the spring's stiffness. A larger k means a greater force is required for the same displacement, measured in newtons per metre (N/m).

x⃗

Displacement vector

The displacement of the spring's endpoint or attached object from its equilibrium position, measured in metres (m).

x

Signed displacement

The one-dimensional displacement from equilibrium, with positive and negative directions defined by the coordinate system.

SI units and conversions

Si Unit

newton (N)

Dimensional Formula

[M L T⁻²]

Unit Explanation

The spring constant has units of newtons per metre. Multiplying k by displacement in metres produces force in newtons.

Unit Conversions

ConversionApplication

1 N/m = 1 kg/s²

Expressing spring stiffness in equivalent SI base units.

1 cm = 0.01 m

Converting spring displacement into metres before calculation.

1 mm = 0.001 m

Converting small spring deformations into metres.

Conditions of use

  • The spring must operate within its linear elastic range.

  • The displacement must be measured from the spring's equilibrium position.

  • The spring constant must be known or experimentally determined.

  • The spring's response must be adequately approximated by a linear force–displacement relationship.

  • The sign convention must identify the displacement direction and corresponding restoring-force direction.

  • For the vector form shown, the spring must have an isotropic linear response or be constrained to a single direction.

Limitations and assumptions

  • The law is not generally valid beyond the elastic or proportional limit of a real spring.

  • Real springs can exhibit nonlinear behaviour, hysteresis, internal damping and permanent deformation.

  • The simple equation does not include damping or other external forces acting on the attached object.

  • A real three-dimensional spring may have direction-dependent stiffness and require a stiffness matrix rather than a single scalar k.

  • The equation describes the spring force, not automatically the net force on the attached object.

Step-by-step worked examples

ProblemGivenSolutionAnswer

An ideal spring has a spring constant of 200 N/m and is stretched 0.05 m from equilibrium. Calculate the magnitude and direction of the restoring force.

  • k = 200 N/m

  • x = +0.05 m

StepExplanationCalculation

1

Write Hooke's law.

Fₛ = −kx

2

Substitute the spring constant and displacement.

Fₛ = −200 × 0.05

3

Calculate the signed force.

Fₛ = −10 N

4

Interpret the negative sign as a force opposite to the positive displacement.

|Fₛ| = 10 N

The restoring force has a magnitude of 10 N and acts toward the equilibrium position.

A spring experiences a restoring force of 30 N when stretched 0.15 m. Determine its spring constant, assuming ideal linear behaviour.

  • |Fₛ| = 30 N

  • |x| = 0.15 m

StepExplanationCalculation

1

Use the magnitude form of Hooke's law.

|Fₛ| = k|x|

2

Rearrange to find the spring constant.

k = |Fₛ|/|x|

3

Substitute the known values.

k = 30/0.15

4

Evaluate the spring constant.

k = 200 N/m

The spring constant is 200 N/m.

Real-world applications

ApplicationExplanation

Vehicle Suspension

Springs in vehicle suspension systems provide restoring forces that help support the vehicle and respond to road irregularities.

Mechanical Spring Scales

Spring-based measuring devices use the relationship between force and displacement to estimate applied loads.

Vibration Systems

Hooke's law is used to model the restoring force in mass–spring oscillators.

Engineering Components

Mechanical designers use spring stiffness to select springs for mechanisms, supports and devices.

Laboratory Experiments

The law is used to measure spring constants and investigate the relationship between applied force and elastic deformation.

Formula Meaning

Definition

Hooke's law states that the restoring force exerted by an ideal linear spring is proportional to its displacement from the equilibrium position and directed opposite to that displacement.

Interpretation

When a spring is stretched or compressed within its linear elastic range, the magnitude of its restoring force increases in direct proportion to the displacement. The negative sign indicates that the spring force tends to return the spring to equilibrium.

Physical Significance

Hooke's law describes the force behaviour of ideal elastic springs. It is fundamental to analysing spring-supported systems, vibration, oscillation and many mechanical devices.

Mathematical Representations

Vector Form

F⃗ₛ = −kx⃗

One Dimensional Form

Fₛ = −kx

Magnitude Form

|Fₛ| = k|x|

Spring Constant

k = |Fₛ|/|x|

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source