✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-DYN-010

Linear Velocity-Dependent Resistive Force

A linear velocity-dependent resistive force is a force whose magnitude is directly proportional to an object's velocity relative to the surrounding medium and whose direction is opposite to that relative velocity.

\(\vec{F}_{r} = -b \vec{v}\)

What this formula means

Definition

A linear velocity-dependent resistive force is a force whose magnitude is directly proportional to an object's velocity relative to the surrounding medium and whose direction is opposite to that relative velocity.

Interpretation

When an object moves through a medium in a regime where linear resistance is a suitable approximation, increasing its speed increases the magnitude of the resistive force proportionally. The negative sign indicates that the force opposes motion relative to the medium.

Physical Significance

This model is useful for describing viscous resistance in certain low-speed fluid-flow situations and for analysing damped motion. It helps explain how resistance changes an object's acceleration and can lead to terminal velocity under suitable conditions.

Mathematical Representations

Vector Form

F⃗ᵣ = −b v⃗rel

Magnitude Form

Fᵣ = bvrel

One Dimensional Form

Fᵣ = −bv

Resistance Coefficient

b = Fᵣ/vrel

Scientific principle

Principle

Linear Viscous Resistance and Velocity-Dependent Damping

Derivation

StepExplanationExpression

1

Consider an object moving relative to a surrounding fluid or medium.

v⃗rel = v⃗object − v⃗medium

2

In a regime where linear resistance is appropriate, experiments and fluid models allow the resistive-force magnitude to be approximated as proportional to relative speed.

Fᵣ ∝ |v⃗rel|

3

Introduce the positive resistance coefficient b as the proportionality constant.

Fᵣ = b|v⃗rel|

4

The resistive force acts opposite to the relative velocity.

Direction of F⃗ᵣ = −v⃗rel

5

Combine magnitude and direction into vector form.

F⃗ᵣ = −b v⃗rel

6

For one-dimensional motion, the same relationship becomes a signed scalar equation.

Fᵣ = −bv

Result

For linear velocity-dependent resistance, the resistive force is F⃗ᵣ = −b v⃗rel, where b is the positive resistance coefficient.

Variables and their meanings

SymbolMeaningDescription

F⃗ᵣ

Resistive force vector

The force exerted by the medium on the moving object, directed opposite to its relative velocity, measured in newtons (N).

b

Linear resistance coefficient

A positive coefficient describing the strength of linear velocity-dependent resistance, measured in newton seconds per metre (N·s/m) in SI.

v⃗rel

Relative velocity vector

The velocity of the object relative to the surrounding medium, measured in metres per second (m/s).

vrel

Relative speed

The magnitude of the relative velocity between the object and the medium, measured in metres per second (m/s).

v

Signed velocity

The one-dimensional velocity relative to the medium, with direction represented by its sign.

SI units and conversions

Si Unit

newton (N)

Dimensional Formula

[M L T⁻²]

Unit Explanation

The resistance coefficient b has units N·s/m, equivalent to kg/s. Multiplying b by velocity in m/s produces a force in newtons.

Unit Conversions

ConversionApplication

1 N·s/m = 1 kg/s

Expressing the linear resistance coefficient in SI base units.

1 km/h = 1/3.6 m/s

Converting vehicle or object speed into metres per second.

1 mN = 0.001 N

Expressing small resistive forces in convenient SI subunits.

Conditions of use

  • The object must move relative to a surrounding medium or experience a mechanism that produces linear velocity-dependent resistance.

  • The resistance coefficient b must be known or determined experimentally.

  • The relative velocity must be measured with respect to the medium, not automatically with respect to the ground.

  • The linear resistance model must be appropriate for the physical flow or damping regime.

  • The force direction must oppose the relative velocity.

  • The coefficient may be treated as constant only when the relevant medium and physical conditions remain sufficiently unchanged.

Limitations and assumptions

  • The formula is not a universal law for all fluid resistance; many objects experience approximately quadratic drag instead.

  • The coefficient b can depend on object geometry, fluid properties, temperature and flow conditions.

  • The equation assumes a linear relationship between resistive force and relative velocity.

  • It does not include other forces such as gravity, buoyancy, contact forces or externally applied forces.

  • The model may be inadequate when flow becomes turbulent or when the object's motion produces strongly nonlinear resistance.

Step-by-step worked examples

ProblemGivenSolutionAnswer

An object moves through a medium at 4 m/s. The linear resistance coefficient is 3 N·s/m. Calculate the magnitude and direction of the resistive force.

  • vrel = 4 m/s

  • b = 3 N·s/m

StepExplanationCalculation

1

Write the magnitude of the linear resistive force.

Fᵣ = bvrel

2

Substitute the known values.

Fᵣ = 3 × 4

3

Calculate the force magnitude.

Fᵣ = 12 N

4

Determine the direction from the negative sign in the vector equation.

Opposite to the relative velocity

The resistive force has a magnitude of 12 N and acts opposite to the object's motion relative to the medium.

An object experiences a linear resistive force of 8 N while moving at 2 m/s relative to the medium. Determine the resistance coefficient.

  • Fᵣ = 8 N

  • vrel = 2 m/s

StepExplanationCalculation

1

Start with the magnitude relationship.

Fᵣ = bvrel

2

Rearrange to determine b.

b = Fᵣ/vrel

3

Substitute the values.

b = 8/2

4

Evaluate the resistance coefficient.

b = 4 N·s/m

The linear resistance coefficient is 4 N·s/m.

Real-world applications

ApplicationExplanation

Viscous Fluid Motion

Linear resistance models can approximate the drag experienced by small objects moving slowly through certain fluids.

Damped Mechanical Systems

Velocity-dependent resistance is used to model damping in mechanical systems and oscillators.

Laboratory Experiments

Researchers use linear drag models to investigate the motion of small particles in suitable fluid-flow regimes.

Mechanical Design

Engineers use damping coefficients to analyse how resistance affects moving mechanical components.

Motion Modelling

The formula helps predict how velocity-dependent resistance changes the acceleration and motion of an object.

Formula Meaning

Definition

A linear velocity-dependent resistive force is a force whose magnitude is directly proportional to an object's velocity relative to the surrounding medium and whose direction is opposite to that relative velocity.

Interpretation

When an object moves through a medium in a regime where linear resistance is a suitable approximation, increasing its speed increases the magnitude of the resistive force proportionally. The negative sign indicates that the force opposes motion relative to the medium.

Physical Significance

This model is useful for describing viscous resistance in certain low-speed fluid-flow situations and for analysing damped motion. It helps explain how resistance changes an object's acceleration and can lead to terminal velocity under suitable conditions.

Mathematical Representations

Vector Form

F⃗ᵣ = −b v⃗rel

Magnitude Form

Fᵣ = bvrel

One Dimensional Form

Fᵣ = −bv

Resistance Coefficient

b = Fᵣ/vrel

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source