✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-DYN-038

Conservation of Mechanical Energy

When only conservative forces do work, or when the net work done by non-conservative forces is zero, the total mechanical energy of a system remains constant.

\(K_{\mathrm{i}} + U_{\mathrm{i}} = K_{\mathrm{f}} + U_{\mathrm{f}}\)

What this formula means

Definition

When only conservative forces do work, or when the net work done by non-conservative forces is zero, the total mechanical energy of a system remains constant.

Interpretation

Kinetic energy and potential energy can transform into each other while their sum remains unchanged under the required conditions.

Physical Significance

This principle allows the motion of a system to be analysed using energy relationships without calculating every force and acceleration separately.

Mechanical Energy Definition

E_mech = K + U

General Conservative Form

K + U = constant

Scientific principle

Principle

The work–energy theorem combined with the definition of conservative potential energy leads to conservation of mechanical energy.

Derivation

StepExplanationExpression

1

Start with the work–energy theorem for all forces.

W_net = ΔK

2

Separate the work done by conservative and non-conservative forces.

W_c + W_nc = ΔK

3

For conservative forces, work is the negative change in potential energy.

W_c = −ΔU

4

Substitute the conservative-force relation into the work–energy equation.

−ΔU + W_nc = ΔK

5

Rearrange to obtain the general mechanical-energy relation.

ΔK + ΔU = W_nc

6

If non-conservative work is zero, the change in total mechanical energy is zero.

Δ(K + U) = 0

7

Write the equality between initial and final mechanical energy.

K_i + U_i = K_f + U_f

Result

K_i + U_i = K_f + U_f when the net non-conservative work is zero.

Variables and their meanings

SymbolMeaningDescription

K_i

Initial kinetic energy

Kinetic energy at the initial state.

U_i

Initial potential energy

Potential energy at the initial state.

K_f

Final kinetic energy

Kinetic energy at the final state.

U_f

Final potential energy

Potential energy at the final state.

W_nc

Non-conservative work

Work performed by non-conservative forces, such as kinetic friction or air resistance.

E_mech

Mechanical energy

The sum of kinetic and potential energy.

SI units and conversions

Si Unit

joule (J)

Dimensional Formula

[M L² T⁻²]

Unit Explanation

Kinetic energy, potential energy, and work all have the dimensions of energy, so every term in the equation is measured in joules.

Unit Conversions

  • 1 J = 1 N·m

  • 1 kJ = 1000 J

  • 1 MJ = 10⁶ J

  • 1 erg = 10⁻⁷ J

Conditions of use

  • The system must be defined so that the relevant potential energies can be included.

  • Only conservative forces should perform work, or the net work by non-conservative forces must be zero.

  • Initial and final energy values must use the same reference level for potential energy.

  • All relevant forms of mechanical potential energy must be included.

  • The analysis is usually performed in an inertial reference frame.

Limitations and assumptions

  • Mechanical energy is not conserved when non-conservative forces perform nonzero net work.

  • Total energy is conserved even when mechanical energy is transformed into thermal, sound, or other forms.

  • The choice of zero potential energy is arbitrary, but it must be consistent throughout the calculation.

  • The equation does not mean kinetic energy and potential energy are individually constant.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A 2 kg object is released from rest at a height of 10 m above the ground. Neglect air resistance and take g = 9.8 m/s². Find its speed just before reaching the ground.

m = 2 kg, h = 10 m, u = 0 m/s, g = 9.8 m/s²

StepExplanationCalculation

1

Write the conservation of mechanical energy equation.

K_i + U_i = K_f + U_f

2

At the initial position, the object is at rest, so its kinetic energy is zero.

K_i = 0

3

Choose the ground as the zero level of gravitational potential energy.

U_i = mgh = 2 × 9.8 × 10 = 196 J; U_f = 0

4

Substitute the energies into the conservation equation.

0 + 196 = ½ × 2 × v² + 0

5

Solve for the final speed.

196 = v² ⇒ v = 14 m/s

The object's speed just before reaching the ground is 14 m/s.

Real-world applications

ApplicationExplanation

Roller coasters

The transformation between gravitational potential energy and kinetic energy helps predict speeds at different track heights when losses are negligible.

Pendulum motion

A pendulum continuously exchanges gravitational potential energy and kinetic energy during ideal oscillation.

Spring systems

Energy moves between elastic potential energy and kinetic energy in ideal spring–mass systems.

Hydroelectric systems

Gravitational potential energy of elevated water can be converted into kinetic and mechanical energy.

Formula Meaning

Definition

When only conservative forces do work, or when the net work done by non-conservative forces is zero, the total mechanical energy of a system remains constant.

Interpretation

Kinetic energy and potential energy can transform into each other while their sum remains unchanged under the required conditions.

Physical Significance

This principle allows the motion of a system to be analysed using energy relationships without calculating every force and acceleration separately.

Mechanical Energy Definition

E_mech = K + U

General Conservative Form

K + U = constant

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source