✦ScienexySCIENCE KNOWLEDGE LIBRARY
Dynamics · SCI-FORM-DYN-046

Coefficient of Restitution

The coefficient of restitution is the ratio of the relative speed of separation after a collision to the relative speed of approach before the collision, measured along the line of impact.

\(e = (v_{2}f - v_{1}f)/(v_{1}i - v_{2}i)\)

What this formula means

Definition

The coefficient of restitution is the ratio of the relative speed of separation after a collision to the relative speed of approach before the collision, measured along the line of impact.

Interpretation

The coefficient describes how much relative motion is retained after an impact. A value of 1 represents a perfectly elastic collision, a value between 0 and 1 represents a partially inelastic collision, and 0 represents a perfectly inelastic collision in which the bodies have no relative velocity immediately after impact.

Physical Significance

This quantity helps classify collisions and determine the relative velocities of interacting bodies after impact.

General Speed Form

e = relative speed of separation / relative speed of approach

Perfectly Elastic Case

e = 1

Perfectly Inelastic Case

e = 0

Partially Inelastic Case

0 < e < 1

Scientific principle

Principle

The coefficient of restitution characterises the relative velocity change along the line of impact. It is defined by comparing the bodies' separation speed after collision with their approach speed before collision.

Derivation

StepExplanationExpression

1

Consider two bodies moving along a common line before collision, with the first body approaching the second.

v₁ᵢ > v₂ᵢ

2

The relative speed of approach is the difference between their initial velocities under the chosen positive direction.

u_approach = v₁ᵢ − v₂ᵢ

3

After collision, the second body moves away from the first. The relative speed of separation is expressed as the difference between their final velocities.

u_separation = v₂f − v₁f

4

Define the coefficient of restitution as the ratio of these relative speeds.

e = u_separation/u_approach

5

Substitute the expressions for approach and separation speeds.

e = (v₂f − v₁f)/(v₁ᵢ − v₂ᵢ)

Result

e = (v₂f − v₁f)/(v₁ᵢ − v₂ᵢ), for the stated one-dimensional approach and separation convention.

Variables and their meanings

SymbolMeaningDescription

e

Coefficient of restitution

A dimensionless quantity representing the ratio of relative separation speed to relative approach speed.

v₁ᵢ

Initial velocity of body 1

The velocity of the first body immediately before impact.

v₂ᵢ

Initial velocity of body 2

The velocity of the second body immediately before impact.

v₁f

Final velocity of body 1

The velocity of the first body immediately after impact.

v₂f

Final velocity of body 2

The velocity of the second body immediately after impact.

u_approach

Relative speed of approach

The relative speed of the two bodies immediately before impact.

u_separation

Relative speed of separation

The relative speed of the two bodies immediately after impact.

SI units and conversions

Si Unit

dimensionless

Dimensional Formula

[M⁰ L⁰ T⁰]

Unit Explanation

The numerator and denominator are both relative speeds, measured in m/s. Their units cancel, leaving a dimensionless ratio.

Unit Conversions

  • e = 1: perfectly elastic collision

  • 0 < e < 1: partially inelastic collision

  • e = 0: perfectly inelastic collision

  • The coefficient has no SI unit and is not expressed in metres per second.

Conditions of use

  • The formula is applied along the line of impact.

  • The initial and final velocities must use the same coordinate direction convention.

  • The bodies must be approaching before impact and separating or moving together after impact according to the collision type.

  • The velocities must be measured immediately before and after the collision.

  • For oblique collisions, apply the relation to the normal components of velocity along the line of impact.

Limitations and assumptions

  • The coefficient of restitution does not by itself determine both final velocities; an additional relation such as momentum conservation is generally required.

  • The simple scalar expression is not a complete description of a two-dimensional collision.

  • The value of e may depend on material properties, surface conditions, impact speed, and deformation.

  • A value greater than 1 may occur in some superelastic interactions where additional stored energy is released; the usual classification assumes ordinary passive collisions.

  • The coefficient does not directly measure the total energy lost unless the masses and collision conditions are also known.

Step-by-step worked examples

ProblemGivenSolutionAnswer

Two bodies approach each other along a straight line. Their initial velocities are 8 m/s and 2 m/s respectively. After collision, their velocities are 1 m/s and 7 m/s respectively. Calculate the coefficient of restitution.

v₁ᵢ = 8 m/s, v₂ᵢ = 2 m/s, v₁f = 1 m/s, v₂f = 7 m/s

StepExplanationCalculation

1

Write the coefficient of restitution formula.

e = (v₂f − v₁f)/(v₁ᵢ − v₂ᵢ)

2

Substitute the initial and final velocities.

e = (7 − 1)/(8 − 2)

3

Simplify the ratio.

e = 6/6 = 1

The coefficient of restitution is 1, indicating a perfectly elastic collision in the ideal model.

The relative speed of approach of two bodies is 10 m/s and their relative speed of separation is 6 m/s. Determine the coefficient of restitution.

u_approach = 10 m/s, u_separation = 6 m/s

StepExplanationCalculation

1

Use the definition of the coefficient of restitution.

e = u_separation/u_approach

2

Substitute the given relative speeds.

e = 6/10

3

Evaluate the ratio.

e = 0.6

The coefficient of restitution is 0.6, indicating a partially inelastic collision.

Real-world applications

ApplicationExplanation

Sports equipment

The coefficient of restitution helps describe how different balls and playing surfaces respond to impact.

Vehicle safety testing

Impact-response measurements can help engineers characterise how materials and structures behave during collisions.

Material engineering

Engineers use restitution measurements to compare the rebound behaviour of different materials.

Industrial impact systems

The coefficient is useful in analysing interactions involving particles, pellets, and mechanical components.

Ball rebound studies

It provides a physical measure of how much relative speed remains after an impact.

Related topics

  • Conservation of Linear Momentum

  • Elastic Collision

  • Inelastic Collision

  • Impulse–Momentum Theorem

  • Relative Velocity

Topics

  • Dynamics

  • Collision

  • Coefficient of Restitution

  • Elastic Collision

  • Inelastic Collision

  • Relative Velocity

Subject

Dynamics

Section

Collisions

Formula Meaning

Definition

The coefficient of restitution is the ratio of the relative speed of separation after a collision to the relative speed of approach before the collision, measured along the line of impact.

Interpretation

The coefficient describes how much relative motion is retained after an impact. A value of 1 represents a perfectly elastic collision, a value between 0 and 1 represents a partially inelastic collision, and 0 represents a perfectly inelastic collision in which the bodies have no relative velocity immediately after impact.

Physical Significance

This quantity helps classify collisions and determine the relative velocities of interacting bodies after impact.

General Speed Form

e = relative speed of separation / relative speed of approach

Perfectly Elastic Case

e = 1

Perfectly Inelastic Case

e = 0

Partially Inelastic Case

0 < e < 1

Reference

  • Halliday, Resnick and Walker — Fundamentals of Physics

  • Young and Freedman — University Physics with Modern Physics

  • OpenStax — University Physics, Volume 1

Sources and further reading

  • Halliday, Resnick and Walker — Fundamentals of Physics

  • Young and Freedman — University Physics with Modern Physics

  • OpenStax — University Physics, Volume 1

← Back to Formula Hub · Suggest a correction or source