✦ScienexySCIENCE KNOWLEDGE LIBRARY
Dynamics · SCI-FORM-DYN-048

Final Velocities in a One-Dimensional Elastic Collision

These equations determine the final velocities of two bodies after a one-dimensional perfectly elastic collision when their masses and initial velocities are known.

First Body

\(v_{1}f = [(m_{1} - m_{2})v_{1i} + 2m_{2}v_{2i}]/(m_{1} + m_{2})\)

Second Body

\(v_{2}f = [2m_{1}v_{1i} + (m_{2} - m_{1})v_{2i}]/(m_{1} + m_{2})\)

What this formula means

Definition

These equations determine the final velocities of two bodies after a one-dimensional perfectly elastic collision when their masses and initial velocities are known.

Interpretation

The final velocity of each body depends on both masses and both initial velocities. The equations account for the simultaneous conservation of linear momentum and kinetic energy.

Physical Significance

They provide a direct solution for one-dimensional elastic collision problems without requiring the simultaneous equations to be solved from the beginning each time.

Stationary Second Body

If v₂ᵢ = 0, then v₁f = [(m₁ − m₂)/(m₁ + m₂)]v₁ᵢ and v₂f = [2m₁/(m₁ + m₂)]v₁ᵢ

Equal Mass Special Case

If m₁ = m₂, then v₁f = v₂ᵢ and v₂f = v₁ᵢ

Scientific principle

Principle

The final velocities in a one-dimensional elastic collision are obtained by combining conservation of linear momentum with conservation of kinetic energy, or equivalently with the elastic-collision relative-velocity relation.

Derivation

StepExplanationExpression

1

Apply conservation of linear momentum to the two-body system.

m₁v₁ᵢ + m₂v₂ᵢ = m₁v₁f + m₂v₂f

2

For a perfectly elastic collision, the coefficient of restitution equals one. Therefore, the relative speed of separation equals the relative speed of approach.

v₂f − v₁f = v₁ᵢ − v₂ᵢ

3

Rearrange the relative-velocity equation to express the second body's final velocity in terms of the first body's final velocity.

v₂f = v₁f + v₁ᵢ − v₂ᵢ

4

Substitute this expression into the momentum-conservation equation.

m₁v₁ᵢ + m₂v₂ᵢ = m₁v₁f + m₂(v₁f + v₁ᵢ − v₂ᵢ)

5

Collect the terms containing v₁f and rearrange.

(m₁ + m₂)v₁f = (m₁ − m₂)v₁ᵢ + 2m₂v₂ᵢ

6

Divide by the total mass to obtain the first body's final velocity.

v₁f = [(m₁ − m₂)v₁ᵢ + 2m₂v₂ᵢ]/(m₁ + m₂)

7

Substitute the first body's final velocity into the relative-velocity relation and simplify to obtain the second body's final velocity.

v₂f = [2m₁v₁ᵢ + (m₂ − m₁)v₂ᵢ]/(m₁ + m₂)

Result

v₁f = [(m₁ − m₂)v₁ᵢ + 2m₂v₂ᵢ]/(m₁ + m₂); v₂f = [2m₁v₁ᵢ + (m₂ − m₁)v₂ᵢ]/(m₁ + m₂).

Variables and their meanings

SymbolMeaningDescription

m₁

Mass of body 1

The mass of the first body before and after collision.

m₂

Mass of body 2

The mass of the second body before and after collision.

v₁ᵢ

Initial velocity of body 1

The velocity of the first body immediately before collision.

v₂ᵢ

Initial velocity of body 2

The velocity of the second body immediately before collision.

v₁f

Final velocity of body 1

The velocity of the first body immediately after collision.

v₂f

Final velocity of body 2

The velocity of the second body immediately after collision.

SI units and conversions

Si Unit

metre per second (m/s) for velocity; kilogram (kg) for mass

Dimensional Formula

Velocity: [L T⁻¹]; Mass: [M]

Unit Explanation

The mass ratios in the equations are dimensionless because their numerator and denominator have units of mass. Multiplication by initial velocity therefore produces final velocity in m/s.

Unit Conversions

  • 1 m/s = 3.6 km/h

  • 1 km/h = 5/18 m/s

  • 1 m/s = 100 cm/s

  • 1 kg = 1000 g

Conditions of use

  • The collision must be one-dimensional, with both bodies moving along the same straight line.

  • The collision must be perfectly elastic in the ideal model.

  • The net external impulse on the two-body system must be zero or negligible.

  • Both masses must remain constant.

  • All velocities must be expressed using the same positive direction convention.

  • The velocities must refer to the states immediately before and after collision.

Limitations and assumptions

  • These equations cannot be used directly for partially inelastic or perfectly inelastic collisions.

  • They do not describe general oblique collisions in two or three dimensions.

  • Real collisions may involve energy losses due to deformation, sound, and heating.

  • The equations determine translational velocities and do not automatically include rotational motion.

  • A consistent sign convention is essential; using speeds instead of signed velocities may produce incorrect answers.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A 2 kg body moving at 6 m/s collides elastically with a stationary 4 kg body. Determine the final velocities of both bodies.

m₁ = 2 kg, m₂ = 4 kg, v₁ᵢ = 6 m/s, v₂ᵢ = 0 m/s

StepExplanationCalculation

1

Use the first-body final-velocity equation.

v₁f = [(m₁ − m₂)v₁ᵢ + 2m₂v₂ᵢ]/(m₁ + m₂)

2

Substitute the values.

v₁f = [(2 − 4)(6) + 2(4)(0)]/(2 + 4)

3

Calculate the first body's final velocity.

v₁f = −12/6 = −2 m/s

4

Use the second-body final-velocity equation.

v₂f = [2m₁v₁ᵢ + (m₂ − m₁)v₂ᵢ]/(m₁ + m₂)

5

Substitute the values and simplify.

v₂f = [2(2)(6) + (4 − 2)(0)]/6 = 4 m/s

The 2 kg body moves at 2 m/s in the opposite direction after collision, while the 4 kg body moves at 4 m/s in the original direction.

Two equal-mass bodies of 3 kg each approach a one-dimensional elastic collision. The first moves at 5 m/s east and the second at 2 m/s west. Determine their final velocities.

m₁ = 3 kg, m₂ = 3 kg, v₁ᵢ = +5 m/s, v₂ᵢ = −2 m/s

StepExplanationCalculation

1

Recognise that the masses are equal. In a one-dimensional perfectly elastic collision, equal masses exchange velocities.

v₁f = v₂ᵢ; v₂f = v₁ᵢ

2

Substitute the initial velocities.

v₁f = −2 m/s; v₂f = +5 m/s

The first body moves west at 2 m/s, and the second body moves east at 5 m/s.

Real-world applications

ApplicationExplanation

Billiard-ball collisions

The equations can approximate the final velocities of billiard balls when their collision is close to elastic and occurs along one line.

Laboratory collision experiments

Students and researchers use these relations to compare measured velocities with ideal elastic-collision predictions.

Particle collision modelling

One-dimensional elastic collision equations provide simplified models for interactions between particles.

Mechanical system design

Engineers use collision models to understand momentum exchange between moving components.

Related topics

  • Conservation of Linear Momentum

  • Conservation of Kinetic Energy

  • Coefficient of Restitution

  • Elastic Collision

  • Relative Velocity

Topics

  • Dynamics

  • Elastic Collision

  • Final Velocity

  • One-Dimensional Collision

  • Momentum Conservation

  • Kinetic Energy Conservation

Subject

Dynamics

Section

Collisions

Formula Meaning

Definition

These equations determine the final velocities of two bodies after a one-dimensional perfectly elastic collision when their masses and initial velocities are known.

Interpretation

The final velocity of each body depends on both masses and both initial velocities. The equations account for the simultaneous conservation of linear momentum and kinetic energy.

Physical Significance

They provide a direct solution for one-dimensional elastic collision problems without requiring the simultaneous equations to be solved from the beginning each time.

Stationary Second Body

If v₂ᵢ = 0, then v₁f = [(m₁ − m₂)/(m₁ + m₂)]v₁ᵢ and v₂f = [2m₁/(m₁ + m₂)]v₁ᵢ

Equal Mass Special Case

If m₁ = m₂, then v₁f = v₂ᵢ and v₂f = v₁ᵢ

Reference

  • Halliday, Resnick and Walker — Fundamentals of Physics

  • Young and Freedman — University Physics with Modern Physics

  • OpenStax — University Physics, Volume 1

Sources and further reading

  • Halliday, Resnick and Walker — Fundamentals of Physics

  • Young and Freedman — University Physics with Modern Physics

  • OpenStax — University Physics, Volume 1

← Back to Formula Hub · Suggest a correction or source