✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-EAR-2261

Richards Equation for Unsaturated Soil Flow

The Richards equation describes the movement of water through variably saturated porous materials, particularly unsaturated soil. It combines conservation of water mass with Darcy–Buckingham flow and accounts for the dependence of hydraulic conductivity and water content on soil-water pressure head.

\(C(h) \partial h/\partial t = \nabla\cdot[K(h)(\nabla h + e_{\mathrm{z}})]\)

What this formula means

The Richards equation describes the movement of water through variably saturated porous materials, particularly unsaturated soil. It combines conservation of water mass with Darcy–Buckingham flow and accounts for the dependence of hydraulic conductivity and water content on soil-water pressure head.

Scientific principle

Principle

Water movement through unsaturated soil is driven by gradients in total hydraulic head. As soil becomes wetter or drier, its water content and hydraulic conductivity change. The Richards equation represents this nonlinear behavior through a partial differential equation.

Derivation

  • 1. Conservation of water mass requires the change in volumetric water content to balance the divergence of water flux.

  • 2. The continuity equation is ∂θ/∂t = −∇·q, where q is the Darcy water-flux vector.

  • 3. Darcy–Buckingham law expresses unsaturated flow as q = −K(h)∇H.

  • 4. Let h represent pressure head and z be the vertical coordinate measured upward. Total hydraulic head is H = h + z.

  • 5. Therefore, q = −K(h)(∇h + e_z), where e_z is the upward vertical unit vector.

  • 6. Substituting the flux relation into the continuity equation gives ∂θ/∂t = ∇·[K(h)(∇h + e_z)].

  • 7. Because water content depends on pressure head, θ = θ(h), the chain rule gives ∂θ/∂t = C(h)∂h/∂t.

  • 8. Combining these expressions produces the pressure-head form of the Richards equation.

Final Result

C(h) ∂h/∂t = ∇·[K(h)(∇h + e_z)]

Alternative Water Content Form

∂θ/∂t = ∇·[K(θ)∇(h + z)]

Water Flux Relation

q = −K(h)(∇h + e_z)

Hydraulic Head Relation

H = h + z

Interpretation

The equation predicts how soil-water pressure head and moisture distribution evolve through time under specified soil properties and boundary conditions.

Variables and their meanings

SymbolMeaningUnitAdditional Information

C(h)

Specific moisture capacity, defined as dθ/dh

m⁻¹

Describes the change in volumetric water content per unit change in pressure head.

h

Soil-water pressure head

m

t

Time

s

θ

Volumetric soil-water content

m³/m³

K(h)

Unsaturated hydraulic conductivity

m/s

∇

Spatial gradient or divergence operator, according to its mathematical use

m⁻¹ for the gradient operator

e_z

Upward vertical unit vector

Dimensionless

q

Darcy water-flux vector

m/s

H

Total hydraulic head

m

SI units and conversions

Pressure Head

m

Time

s

Volumetric Water Content

m³/m³

Specific Moisture Capacity

m⁻¹

Hydraulic Conductivity

m/s

Water Flux

m/s

Conditions of use

  • The soil is treated as a porous continuum at the scale of analysis.

  • Water movement is described using Darcy–Buckingham flow.

  • The soil-water retention relationship θ(h) must be specified.

  • The unsaturated hydraulic conductivity relationship K(h) must be specified.

  • Initial and boundary conditions are required to solve the equation.

  • The equation is commonly applied to single-phase liquid water flow, with a clearly defined coordinate and sign convention.

Limitations and assumptions

  • The equation is nonlinear because water content and hydraulic conductivity depend on pressure head.

  • Heterogeneous soils require spatially varying hydraulic properties.

  • Preferential flow through cracks, root channels, and macropores may not be represented accurately by a simple continuum model.

  • The basic equation does not automatically describe water-vapor transport, heat transfer, or chemical transport.

  • Numerical solutions may require specialized computational methods and careful treatment of sharp wetting fronts.

  • The pressure-head form assumes a differentiable soil-water retention relationship for C(h).

Step-by-step worked examples

ProblemSolutionAnswer

A simplified one-dimensional soil model has a specific moisture capacity of 0.20 m⁻¹ and a local pressure-head change rate of 0.001 m/s. Calculate the local water-content change rate using the storage relation.

  • Given: C(h) = 0.20 m⁻¹.

  • ∂h/∂t = 0.001 m/s.

  • Use: ∂θ/∂t = C(h) × ∂h/∂t.

  • = 0.20 × 0.001.

  • = 0.0002 s⁻¹.

  • The result represents the local change in volumetric water content per second.

The local volumetric water-content change rate is 2.0 × 10⁻⁴ s⁻¹. This is the storage term, not a complete solution of the Richards equation.

At a particular soil location, hydraulic conductivity is 2 × 10⁻⁶ m/s. The vertical hydraulic-head gradient is 0.5 upward, with upward defined as positive. Calculate the vertical Darcy flux.

  • Given: K(h) = 2 × 10⁻⁶ m/s.

  • ∂H/∂z = 0.5.

  • Use: q_z = −K(h)(∂H/∂z).

  • q_z = −(2 × 10⁻⁶)(0.5).

  • q_z = −1 × 10⁻⁶ m/s.

  • The negative sign indicates downward flow under the selected coordinate convention.

The vertical Darcy flux is −1 × 10⁻⁶ m/s, indicating downward flow.

Real-world applications

  • Modeling infiltration of rainfall into soil

  • Groundwater recharge estimation

  • Agricultural irrigation research

  • Soil drainage and water redistribution studies

  • Contaminant transport modeling

  • Hydrological and environmental simulations

Formula Meaning

The Richards equation describes the movement of water through variably saturated porous materials, particularly unsaturated soil. It combines conservation of water mass with Darcy–Buckingham flow and accounts for the dependence of hydraulic conductivity and water content on soil-water pressure head.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source