✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-EAR-2262

Philip Sorptivity Parameter

Philip's infiltration equation is an approximate representation of cumulative water infiltration into initially unsaturated soil. The sorptivity parameter S describes the contribution of capillary-driven absorption during early infiltration, while A represents a later-time contribution associated with gravity and soil hydraulic properties.

\(I(t) = S\sqrt{t} + At\)

What this formula means

Philip's infiltration equation is an approximate representation of cumulative water infiltration into initially unsaturated soil. The sorptivity parameter S describes the contribution of capillary-driven absorption during early infiltration, while A represents a later-time contribution associated with gravity and soil hydraulic properties.

Scientific principle

Principle

Water initially enters relatively dry soil because of capillary forces and water-potential differences. At early times, cumulative infiltration is approximately proportional to the square root of elapsed time. A later contribution can be represented by a term proportional to time.

Derivation

  • 1. Consider infiltration into a homogeneous soil with an initially specified moisture condition.

  • 2. The early-time infiltration behavior is dominated by capillary absorption.

  • 3. The cumulative infiltration depth is approximately proportional to √t.

  • 4. Introduce S as the proportionality coefficient, giving I(t) ≈ S√t.

  • 5. Include the next-order contribution, commonly represented by At.

  • 6. The resulting two-term approximation is I(t) = S√t + At.

Final Result

I(t) = S√t + At

Infiltration Rate

i(t) = dI/dt = S/(2√t) + A

Early Time Approximation

I(t) ≈ S√t

Interpretation

Sorptivity measures the soil's capacity to absorb water by capillary action under specified initial and boundary conditions.

Variables and their meanings

SymbolMeaningUnit

I(t)

Cumulative infiltration depth

m or mm

S

Soil sorptivity

m·s⁻¹ᐟ² when I is in m and t is in s

t

Elapsed infiltration time

s

A

Second-term infiltration coefficient in the Philip approximation

m/s

i(t)

Instantaneous infiltration rate

m/s

SI units and conversions

Cumulative Infiltration

m or mm

Sorptivity

m·s⁻¹ᐟ² or mm·s⁻¹ᐟ²

Time

s

Second Term Coefficient

m/s

Infiltration Rate

m/s

Conditions of use

  • The equation is generally used as an approximation for infiltration into initially unsaturated soil.

  • The initial water-content condition should be specified.

  • The soil properties and infiltration boundary condition should remain reasonably consistent during the modeled period.

  • Time must be expressed in a unit consistent with the units of S and A.

  • The equation is most useful over a time range where the selected Philip-series approximation is appropriate.

Limitations and assumptions

  • Sorptivity is not a universal constant for all conditions; it depends on initial moisture, soil properties, and boundary conditions.

  • The two-term equation is an approximation rather than a complete description of every infiltration process.

  • Layered, cracked, or strongly heterogeneous soils may depart from the assumed behavior.

  • Surface ponding, changing rainfall intensity, and runoff may require additional modeling.

  • The early-time approximation I ≈ S√t should not be treated as valid indefinitely.

Step-by-step worked examples

ProblemSolutionAnswer

A soil has sorptivity S = 12 mm·min⁻¹ᐟ² and second-term coefficient A = 2 mm/min. Estimate cumulative infiltration after 4 minutes.

  • Given: S = 12 mm·min⁻¹ᐟ².

  • A = 2 mm/min.

  • t = 4 min.

  • Use: I(t) = S√t + At.

  • I(4) = 12√4 + 2 × 4.

  • = 12 × 2 + 8.

  • = 24 + 8.

  • = 32 mm.

The estimated cumulative infiltration is 32 mm.

For a soil with S = 8 mm·min⁻¹ᐟ² and A = 1.5 mm/min, calculate the infiltration rate at t = 4 minutes using the derivative of Philip's equation.

  • Given: S = 8 mm·min⁻¹ᐟ².

  • A = 1.5 mm/min.

  • t = 4 min.

  • Use: i(t) = S/(2√t) + A.

  • i(4) = 8/(2√4) + 1.5.

  • = 8/(2 × 2) + 1.5.

  • = 2 + 1.5.

  • = 3.5 mm/min.

The estimated infiltration rate at 4 minutes is 3.5 mm/min.

Real-world applications

  • Rainfall infiltration modeling

  • Soil hydraulic characterization

  • Agricultural irrigation planning

  • Watershed hydrology

  • Infiltration experiments

  • Estimation of early-time soil water absorption

Formula Meaning

Philip's infiltration equation is an approximate representation of cumulative water infiltration into initially unsaturated soil. The sorptivity parameter S describes the contribution of capillary-driven absorption during early infiltration, while A represents a later-time contribution associated with gravity and soil hydraulic properties.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source