✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-EAR-2263

Soil Water Retention (van Genuchten)

The van Genuchten soil-water retention model describes the relationship between soil-water pressure head and volumetric water content. It is widely used to represent how soil moisture decreases as the soil becomes increasingly unsaturated.

\(\theta(h) = \theta_{r} + (\theta_{s} - \theta_{r})/[1 + (\alpha|h|)^{n}]m, \text{ where } m = 1 - 1/n\)

What this formula means

The van Genuchten soil-water retention model describes the relationship between soil-water pressure head and volumetric water content. It is widely used to represent how soil moisture decreases as the soil becomes increasingly unsaturated.

Scientific principle

Principle

Soil pores have different sizes and retain water at different pressure heads. Larger pores generally drain at relatively small suction, while smaller pores retain water at greater suction. The van Genuchten model represents this nonlinear relationship using fitted soil parameters.

Derivation

  • 1. Define effective saturation as Sₑ = (θ − θᵣ)/(θₛ − θᵣ).

  • 2. The van Genuchten model represents effective saturation as Sₑ = [1 + (α|h|)ⁿ]⁻ᵐ.

  • 3. The parameter m is commonly constrained by m = 1 − 1/n.

  • 4. Multiply the effective-saturation expression by the available water-content range (θₛ − θᵣ).

  • 5. Add residual water content θᵣ.

  • 6. This gives θ(h) = θᵣ + (θₛ − θᵣ)/[1 + (α|h|)ⁿ]ᵐ.

Final Result

θ(h) = θᵣ + (θₛ − θᵣ)/[1 + (α|h|)ⁿ]ᵐ

Effective Saturation

Sₑ = (θ − θᵣ)/(θₛ − θᵣ)

Effective Saturation Model

Sₑ = [1 + (α|h|)ⁿ]⁻ᵐ

Parameter Constraint

m = 1 − 1/n, with n > 1 in the common parameterization

Interpretation

The model approaches saturated water content as pressure head approaches zero from the unsaturated range and approaches residual water content at increasingly strong suction.

Variables and their meanings

SymbolMeaningUnit

θ(h)

Volumetric water content at pressure head h

m³/m³

θᵣ

Residual volumetric water content

m³/m³

θₛ

Saturated volumetric water content

m³/m³

h

Soil-water pressure head

m

α

van Genuchten inverse pressure-head parameter

m⁻¹ when h is in m

n

Dimensionless curve-shape parameter

Dimensionless

m

Dimensionless curve-shape parameter, commonly 1 − 1/n

Dimensionless

Sₑ

Effective degree of saturation

Dimensionless

SI units and conversions

Water Content

m³/m³

Pressure Head

m

Alpha

m⁻¹

Shape Parameters

Dimensionless

Effective Saturation

Dimensionless

Conditions of use

  • The model is commonly applied to unsaturated soil with pressure head h ≤ 0 under the usual pressure-head convention.

  • The parameters θᵣ, θₛ, α, and n must be estimated for the soil being modeled.

  • The pressure-head unit and inverse-head unit of α must be compatible.

  • The common constraint m = 1 − 1/n requires n > 1.

  • The model should be fitted using appropriate soil-water retention measurements.

Limitations and assumptions

  • The model is an empirical representation and does not capture every pore-scale process.

  • Hysteresis between wetting and drying curves is not represented by a single parameter set.

  • Preferential flow and strongly structured soils may require more complex models.

  • Residual water content is a fitted model parameter and does not necessarily mean all remaining water is physically immobile.

  • Parameter estimates can be correlated, making reliable experimental data important.

Step-by-step worked examples

ProblemSolutionAnswer

A soil has θᵣ = 0.05, θₛ = 0.45, α = 0.01 cm⁻¹, and n = 2. Calculate the water content at h = −100 cm using the common van Genuchten parameterization.

  • Given: θᵣ = 0.05 and θₛ = 0.45.

  • α = 0.01 cm⁻¹, n = 2.

  • m = 1 − 1/n = 1 − 1/2 = 0.5.

  • |h| = 100 cm.

  • α|h| = 0.01 × 100 = 1.

  • θ = 0.05 + (0.45 − 0.05)/[1 + 1²]⁰·⁵.

  • = 0.05 + 0.40/√2.

  • ≈ 0.05 + 0.28284.

  • ≈ 0.3328 m³/m³.

The estimated volumetric water content is approximately 0.333 m³/m³.

For a soil with θᵣ = 0.08, θₛ = 0.48, α = 0.02 cm⁻¹, and n = 2, calculate water content at h = −50 cm.

  • Given: θᵣ = 0.08 and θₛ = 0.48.

  • α = 0.02 cm⁻¹ and n = 2.

  • m = 1 − 1/2 = 0.5.

  • α|h| = 0.02 × 50 = 1.

  • θ = 0.08 + (0.48 − 0.08)/[1 + 1²]⁰·⁵.

  • = 0.08 + 0.40/√2.

  • ≈ 0.08 + 0.28284.

  • ≈ 0.3628 m³/m³.

The estimated volumetric water content is approximately 0.363 m³/m³.

Real-world applications

  • Unsaturated soil hydraulic modeling

  • Groundwater recharge simulations

  • Agricultural soil-water management

  • Richards equation parameterization

  • Soil moisture prediction

  • Environmental and hydrological research

Formula Meaning

The van Genuchten soil-water retention model describes the relationship between soil-water pressure head and volumetric water content. It is widely used to represent how soil moisture decreases as the soil becomes increasingly unsaturated.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source