✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-EAR-2264

Brooks–Corey Soil Water Retention

The Brooks–Corey model represents soil-water retention using an air-entry pressure head and a pore-size distribution parameter. It describes how effective saturation decreases as soil suction increases beyond the air-entry threshold.

\(S_{e} = 1, \text{ for } |h| \leq |h_{\mathrm{b}}|; S_{e} = (|h_{\mathrm{b}}|/|h|)l, \text{ for } |h| > |h_{\mathrm{b}}|; \theta = \theta_{r} + S_{e}(\theta_{s} - \theta_{r})\)

What this formula means

The Brooks–Corey model represents soil-water retention using an air-entry pressure head and a pore-size distribution parameter. It describes how effective saturation decreases as soil suction increases beyond the air-entry threshold.

Scientific principle

Principle

Water is retained in soil pores by capillary forces. As suction increases, progressively larger pores drain. The Brooks–Corey model idealizes this behavior using an air-entry pressure head and a power-law relationship between effective saturation and suction.

Derivation

  • 1. Define effective saturation as Sₑ = (θ − θᵣ)/(θₛ − θᵣ).

  • 2. Let h_b be the air-entry pressure head, representing the threshold beyond which air begins to enter the pore network.

  • 3. For suction not exceeding the air-entry magnitude, the idealized model assumes Sₑ = 1.

  • 4. Beyond air entry, effective saturation decreases according to a power law.

  • 5. Define λ as the pore-size distribution parameter.

  • 6. The unsaturated relationship becomes Sₑ = (|h_b|/|h|)ᶫ.

  • 7. Convert effective saturation into volumetric water content using θ = θᵣ + Sₑ(θₛ − θᵣ).

Final Result

Sₑ = (|h_b|/|h|)ᶫ for |h| > |h_b|

Saturated Branch

Sₑ = 1 for |h| ≤ |h_b|

Water Content Relation

θ = θᵣ + Sₑ(θₛ − θᵣ)

Interpretation

A larger suction magnitude beyond air entry generally produces a lower effective saturation.

Variables and their meanings

SymbolMeaningUnit

Sₑ

Effective soil-water saturation

Dimensionless

h

Soil-water pressure head

m

h_b

Air-entry pressure head

m

λ

Brooks–Corey pore-size distribution parameter

Dimensionless

θ

Volumetric water content

m³/m³

θᵣ

Residual volumetric water content

m³/m³

θₛ

Saturated volumetric water content

m³/m³

SI units and conversions

Effective Saturation

Dimensionless

Pressure Head

m

Air Entry Pressure Head

m

Pore Size Parameter

Dimensionless

Volumetric Water Content

m³/m³

Conditions of use

  • The model is commonly applied to unsaturated soils under a negative pressure-head convention.

  • The magnitude of pressure head must be compared with the magnitude of the air-entry pressure head.

  • The parameters θᵣ, θₛ, h_b, and λ must be determined for the soil.

  • The pressure-head units must be consistent.

  • The saturated and unsaturated branches must be applied according to the stated threshold.

Limitations and assumptions

  • The model idealizes the pore-size distribution using a power law.

  • It does not explicitly represent wetting-drying hysteresis.

  • The transition at air entry is idealized and may be smoother in real soils.

  • Structured soils and macropores may not follow the assumed relationship.

  • The model does not by itself provide hydraulic conductivity unless an additional conductivity relationship is specified.

Step-by-step worked examples

ProblemSolutionAnswer

A soil has air-entry pressure head h_b = −10 cm, pressure head h = −40 cm, and λ = 2. Calculate effective saturation.

  • Given: |h_b| = 10 cm.

  • |h| = 40 cm.

  • λ = 2.

  • Since |h| > |h_b|, use Sₑ = (|h_b|/|h|)ᶫ.

  • Sₑ = (10/40)².

  • = (0.25)².

  • = 0.0625.

The effective saturation is 0.0625, or 6.25%.

A soil has θᵣ = 0.05, θₛ = 0.45, h_b = −5 cm, h = −20 cm, and λ = 1.5. Calculate volumetric water content.

  • Given: |h_b| = 5 cm and |h| = 20 cm.

  • λ = 1.5.

  • Sₑ = (5/20)¹·⁵.

  • Sₑ = 0.25¹·⁵.

  • Sₑ = 0.125.

  • θ = θᵣ + Sₑ(θₛ − θᵣ).

  • θ = 0.05 + 0.125(0.45 − 0.05).

  • θ = 0.05 + 0.125 × 0.40.

  • θ = 0.10 m³/m³.

The estimated volumetric water content is 0.10 m³/m³.

Real-world applications

  • Soil-water retention curve analysis

  • Unsaturated groundwater modeling

  • Agricultural soil characterization

  • Hydrological simulation

  • Soil drainage studies

  • Comparison of soil pore-size distributions

Formula Meaning

The Brooks–Corey model represents soil-water retention using an air-entry pressure head and a pore-size distribution parameter. It describes how effective saturation decreases as soil suction increases beyond the air-entry threshold.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source