The FAO-56 Penman–Monteith equation estimates reference evapotranspiration by combining the energy available for evaporation with the aerodynamic influence of atmospheric conditions. It is widely used to calculate the evapotranspiration of a standardized reference grass surface.
Evapotranspiration (Penman–Monteith)
The FAO-56 Penman–Monteith equation estimates reference evapotranspiration by combining the energy available for evaporation with the aerodynamic influence of atmospheric conditions. It is widely used to calculate the evapotranspiration of a standardized reference grass surface.
\(ET_{0} = [0.408\Delta(R_{n} - G) + \gamma(900/(T + 273))u_{2}(e_{s} - e_{a})]/[\Delta + \gamma(1 + 0.34u_{2})]\)
What this formula means
Scientific principle
Principle
Evapotranspiration depends on both the energy available to convert liquid water into vapor and the ability of the atmosphere to transport that vapor away. The Penman–Monteith framework combines an energy-balance component with an aerodynamic component while accounting for surface and aerodynamic resistance.
Derivation
1. Start with the surface energy-balance principle, in which net radiation and soil heat flux determine the available energy.
2. Include the aerodynamic transfer of water vapor driven by the difference between saturation and actual vapor pressure.
3. Combine the energy and aerodynamic terms using the Penman–Monteith resistance framework.
4. For the standardized FAO reference grass surface, use the prescribed reference surface parameters and resistances.
5. Express the resulting daily reference evapotranspiration equation using radiation, temperature, wind speed, vapor pressure, and psychrometric parameters.
6. The coefficient 0.408 converts available energy in MJ/m²/day into an equivalent water depth in mm/day.
Final Result
ET₀ = [0.408Δ(Rₙ − G) + γ(900/(T + 273))u₂(eₛ − eₐ)]/[Δ + γ(1 + 0.34u₂)]
Vapor Pressure Deficit
VPD = eₛ − eₐ
Interpretation
The radiation term represents available energy, while the aerodynamic term represents atmospheric demand for water vapor.
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
ET₀ | Reference evapotranspiration | mm/day |
Δ | Slope of the saturation vapor-pressure curve at mean air temperature | kPa/°C |
Rₙ | Net radiation at the reference surface | MJ/(m²·day) |
G | Soil heat-flux density | MJ/(m²·day) |
γ | Psychrometric constant | kPa/°C |
T | Mean daily air temperature at the standard reference height | °C |
u₂ | Wind speed measured or adjusted to 2 m height | m/s |
eₛ | Mean saturation vapor pressure | kPa |
eₐ | Actual vapor pressure | kPa |
SI units and conversions
Reference Evapotranspiration
mm/day
Net Radiation
MJ/(m²·day)
Soil Heat Flux
MJ/(m²·day)
Temperature
°C
Wind Speed
m/s
Vapor Pressure
kPa
Psychrometric Constant
kPa/°C
Vapor Pressure Curve Slope
kPa/°C
Conditions of use
This specific equation is the FAO-56 daily reference evapotranspiration equation for a standardized grass reference surface.
Wind speed must be measured or adjusted to a height of 2 m.
Net radiation and soil heat flux must be expressed in MJ/(m²·day).
Mean temperature must be in degrees Celsius.
Vapor pressures must be expressed in kPa.
The equation's constants are associated with the standardized reference surface and should not be transferred unchanged to arbitrary crop surfaces.
Daily soil heat flux is often approximated as zero for a sufficiently long daily calculation period, but the selected assumption should be stated.
Limitations and assumptions
ET₀ is reference evapotranspiration, not necessarily the actual evapotranspiration of a particular crop or ecosystem.
Actual crop evapotranspiration generally requires a crop coefficient or a more detailed surface-energy model.
Errors in radiation, wind speed, humidity, and temperature measurements affect the estimate.
The daily equation is not identical to hourly or monthly Penman–Monteith formulations.
The standardized reference surface assumptions may not represent unusual vegetation, terrain, or atmospheric conditions.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
For an illustrative daily calculation, use Δ = 0.20 kPa/°C, Rₙ = 15 MJ/(m²·day), G = 0, γ = 0.066 kPa/°C, T = 25°C, u₂ = 2 m/s, eₛ = 3.17 kPa, and eₐ = 2.00 kPa. Calculate reference evapotranspiration. |
| The estimated reference evapotranspiration is approximately 5.43 mm/day. |
An illustrative dataset has Δ = 0.15 kPa/°C, Rₙ = 12 MJ/(m²·day), G = 0, γ = 0.067 kPa/°C, T = 20°C, u₂ = 1.5 m/s, eₛ = 2.34 kPa, and eₐ = 1.50 kPa. Estimate reference evapotranspiration. |
| The estimated reference evapotranspiration is approximately 3.95 mm/day. |
Real-world applications
Agricultural water-demand estimation
Irrigation scheduling research
Hydrological modeling
Climate and drought studies
Water-resource planning
Comparison of atmospheric evaporative demand
Formula Meaning
The FAO-56 Penman–Monteith equation estimates reference evapotranspiration by combining the energy available for evaporation with the aerodynamic influence of atmospheric conditions. It is widely used to calculate the evapotranspiration of a standardized reference grass surface.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.