✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-EAR-2268

Reference Evapotranspiration (Hargreaves)

The Hargreaves equation estimates daily reference evapotranspiration using mean air temperature, daily maximum and minimum temperatures, and extraterrestrial radiation. It is a temperature-based alternative when detailed radiation, humidity, and wind measurements are unavailable.

\(ET_{0} = 0.0023(T_{\mathrm{mean}} + 17.8)\sqrt{T_{\max} - T_{\min}}R_{a}\)

What this formula means

The Hargreaves equation estimates daily reference evapotranspiration using mean air temperature, daily maximum and minimum temperatures, and extraterrestrial radiation. It is a temperature-based alternative when detailed radiation, humidity, and wind measurements are unavailable.

Scientific principle

Principle

Daily temperature range provides an approximate indication of atmospheric and surface-energy conditions. The Hargreaves model uses this temperature range together with extraterrestrial radiation to estimate the evaporative demand of a standardized reference surface.

Derivation

  • 1. Estimate the daily mean temperature using maximum and minimum air temperatures.

  • 2. Use the difference between maximum and minimum temperatures as an empirical indicator of atmospheric energy conditions.

  • 3. Incorporate extraterrestrial radiation Rₐ to represent the astronomical energy available at the top of the atmosphere.

  • 4. Apply the empirical coefficient 0.0023 and the temperature offset 17.8.

  • 5. The resulting equation estimates reference evapotranspiration in mm/day when Rₐ is expressed in equivalent evaporation units of mm/day.

Final Result

ET₀ = 0.0023(T_mean + 17.8)√(T_max − T_min)Rₐ

Mean Temperature Relation

T_mean = (T_max + T_min)/2

Temperature Range

ΔT = T_max − T_min

Interpretation

The estimate generally increases with extraterrestrial radiation and with the square root of the daily temperature range.

Variables and their meanings

SymbolMeaningUnit

ET₀

Reference evapotranspiration

mm/day

T_mean

Mean daily air temperature

°C

T_max

Daily maximum air temperature

°C

T_min

Daily minimum air temperature

°C

Rₐ

Extraterrestrial radiation expressed in equivalent evaporation units

mm/day

SI units and conversions

Reference Evapotranspiration

mm/day

Temperature

°C

Temperature Range

°C

Extraterrestrial Radiation

mm/day equivalent evaporation

Conditions of use

  • The standard coefficient 0.0023 is used with the stated temperature and radiation units.

  • Mean temperature is commonly calculated as the average of daily maximum and minimum temperatures.

  • The temperature range must be nonnegative.

  • Extraterrestrial radiation must be converted to equivalent evaporation units when originally expressed as energy per unit area.

  • The equation is intended as an empirical estimate of reference evapotranspiration rather than direct measurement of actual evapotranspiration.

Limitations and assumptions

  • The model does not explicitly use measured humidity or wind speed.

  • Accuracy can decrease in climates where the relationship between temperature range and evaporative demand differs from the calibration conditions.

  • It may require local calibration for reliable regional applications.

  • Cloudiness, coastal effects, and unusual atmospheric conditions can influence the temperature-range relationship.

  • The equation estimates reference evapotranspiration and should not be interpreted as actual crop water use without further adjustment.

Step-by-step worked examples

ProblemSolutionAnswer

For an illustrative day, T_max = 30°C, T_min = 18°C, and extraterrestrial radiation Rₐ = 15 mm/day in equivalent evaporation units. Calculate reference evapotranspiration using the Hargreaves equation.

  • Given: T_max = 30°C.

  • T_min = 18°C.

  • Rₐ = 15 mm/day.

  • T_mean = (30 + 18)/2 = 24°C.

  • Temperature range = 30 − 18 = 12°C.

  • ET₀ = 0.0023(24 + 17.8)√12 × 15.

  • ET₀ = 0.0023 × 41.8 × 3.4641 × 15.

  • ET₀ ≈ 4.99 mm/day.

The estimated reference evapotranspiration is approximately 4.99 mm/day.

An illustrative dataset has T_max = 28°C, T_min = 16°C, and Rₐ = 18 mm/day in equivalent evaporation units. Estimate reference evapotranspiration.

  • Given: T_max = 28°C.

  • T_min = 16°C.

  • Rₐ = 18 mm/day.

  • T_mean = (28 + 16)/2 = 22°C.

  • Temperature range = 28 − 16 = 12°C.

  • ET₀ = 0.0023(22 + 17.8)√12 × 18.

  • ET₀ = 0.0023 × 39.8 × 3.4641 × 18.

  • ET₀ ≈ 5.71 mm/day.

The estimated reference evapotranspiration is approximately 5.71 mm/day.

Real-world applications

  • Reference evapotranspiration estimation

  • Agricultural water-resource studies

  • Regional hydrological modeling

  • Climate analysis where meteorological data are limited

  • Irrigation research

  • Comparison of temperature-based evapotranspiration methods

Formula Meaning

The Hargreaves equation estimates daily reference evapotranspiration using mean air temperature, daily maximum and minimum temperatures, and extraterrestrial radiation. It is a temperature-based alternative when detailed radiation, humidity, and wind measurements are unavailable.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source