✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-EAR-2278

Rill Erosion Rate

The excess-shear-stress model estimates the detachment rate of soil from a rill bed or bank when flowing water exerts shear stress greater than the critical stress required to detach soil particles. It is a commonly used process-based representation of rill erosion.

\(D_{r} = K_{r}(\tau - \tau_{\mathrm{c}}), \text{ for } \tau > \tau_{\mathrm{c}}; D_{r} = 0, \text{ for } \tau \leq \tau_{\mathrm{c}}\)

What this formula means

The excess-shear-stress model estimates the detachment rate of soil from a rill bed or bank when flowing water exerts shear stress greater than the critical stress required to detach soil particles. It is a commonly used process-based representation of rill erosion.

Scientific principle

Principle

Flowing water transfers momentum to the soil surface. When the applied boundary shear stress exceeds the soil's critical resistance, particles can be detached. The detachment rate is often modeled as proportional to the excess shear stress.

Derivation

  • 1. Define τ as the hydraulic shear stress exerted by flowing water on the rill surface.

  • 2. Define τ_c as the critical shear stress below which detachment is assumed negligible.

  • 3. Calculate the excess shear stress as τ − τ_c.

  • 4. If τ is greater than τ_c, multiply the excess stress by the rill erodibility coefficient Kᵣ.

  • 5. If τ is at or below τ_c, the idealized detachment rate is set to zero.

  • 6. The resulting piecewise relation represents the detachment capacity of the rill flow.

Final Result

Dᵣ = Kᵣ(τ − τ_c), for τ > τ_c

No Detachment Condition

Dᵣ = 0, for τ ≤ τ_c

Approximate Shear Stress

τ = ρ_w g R_h S_f

Interpretation

Rill detachment increases with excess hydraulic shear stress, provided that the soil erodibility coefficient remains constant.

Variables and their meanings

SymbolMeaningUnit

Dᵣ

Rill soil-detachment rate per unit bed area

kg/(m²·s)

Kᵣ

Rill erodibility coefficient

kg/(N·s)

τ

Applied hydraulic boundary shear stress

Pa or N/m²

τ_c

Critical shear stress for soil detachment

Pa or N/m²

ρ_w

Water density

kg/m³

g

Gravitational acceleration

m/s²

R_h

Hydraulic radius of the rill flow

m

S_f

Energy slope of the flowing water

Dimensionless

SI units and conversions

Detachment Rate

kg/(m²·s)

Rill Erodibility

kg/(N·s)

Shear Stress

Pa

Water Density

kg/m³

Gravitational Acceleration

m/s²

Hydraulic Radius

m

Energy Slope

Dimensionless

Conditions of use

  • The equation applies to soil detachment by concentrated surface flow in rills.

  • The applied and critical shear stresses must use the same units.

  • The erodibility coefficient must be calibrated for the soil and measurement method.

  • The approximate shear-stress equation assumes a suitable hydraulic representation of the rill flow.

  • Detachment and sediment transport capacity should be distinguished when modeling total sediment movement.

Limitations and assumptions

  • The model describes detachment capacity and does not automatically equal the sediment transport rate.

  • Soil cohesion, aggregate stability, roots, and surface crusting can alter the critical stress and erodibility.

  • The linear excess-stress relationship is an empirical approximation.

  • Rill geometry and flow hydraulics can vary during an erosion event.

  • Deposition may occur when sediment supply exceeds the flow's transport capacity.

Step-by-step worked examples

ProblemSolutionAnswer

A rill flow produces a boundary shear stress of 5 Pa. The soil's critical shear stress is 2 Pa and its erodibility coefficient is 0.0004 kg/(N·s). Calculate the detachment rate.

  • Given: τ = 5 Pa.

  • τ_c = 2 Pa.

  • Kᵣ = 0.0004 kg/(N·s).

  • Since τ > τ_c, use Dᵣ = Kᵣ(τ − τ_c).

  • Dᵣ = 0.0004(5 − 2).

  • Dᵣ = 0.0004 × 3.

  • Dᵣ = 0.0012 kg/(m²·s).

The modeled rill detachment rate is 0.0012 kg/(m²·s).

A soil has Kᵣ = 0.0002 kg/(N·s), critical shear stress of 4 Pa, and applied shear stress of 3 Pa. Determine the modeled detachment rate.

  • Given: τ = 3 Pa.

  • τ_c = 4 Pa.

  • Kᵣ = 0.0002 kg/(N·s).

  • Since τ ≤ τ_c, the model assigns Dᵣ = 0.

  • No detachment is predicted by this threshold model.

The modeled detachment rate is 0 kg/(m²·s) because applied shear stress does not exceed the critical value.

Real-world applications

  • Rill erosion process modeling

  • Soil erodibility experiments

  • Agricultural hillslope research

  • Evaluation of surface runoff effects

  • Development of erosion prediction models

  • Assessment of soil conservation measures

Formula Meaning

The excess-shear-stress model estimates the detachment rate of soil from a rill bed or bank when flowing water exerts shear stress greater than the critical stress required to detach soil particles. It is a commonly used process-based representation of rill erosion.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source