✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-EAR-2279

Wind Erosion Threshold Friction Velocity

Threshold friction velocity is the minimum friction velocity associated with the surface shear stress required to initiate movement of soil particles under specified conditions. It is used in wind-erosion research to characterize the resistance of soil particles to aerodynamic entrainment.

\(u*_{t} = \sqrt{\tau_{t}/\rho_{a}}\)

What this formula means

Threshold friction velocity is the minimum friction velocity associated with the surface shear stress required to initiate movement of soil particles under specified conditions. It is used in wind-erosion research to characterize the resistance of soil particles to aerodynamic entrainment.

Scientific principle

Principle

Wind transfers momentum to the ground surface through turbulent shear. When the surface shear stress reaches a critical threshold, aerodynamic forces can initiate particle movement. The friction velocity expresses the shear stress in velocity units and is commonly used in boundary-layer and wind-erosion models.

Derivation

  • 1. Define surface shear stress τ as the tangential stress exerted by wind on the ground.

  • 2. In boundary-layer meteorology, friction velocity is defined by u* = √(τ/ρₐ).

  • 3. At the threshold of particle movement, use the threshold surface shear stress τₜ.

  • 4. Substitute τₜ into the friction-velocity definition.

  • 5. The resulting threshold friction velocity is u*ₜ = √(τₜ/ρₐ).

Final Result

u*ₜ = √(τₜ/ρₐ)

Threshold Stress Relation

τₜ = ρₐ(u*ₜ)²

Interpretation

A higher threshold friction velocity indicates that stronger near-surface wind stress is required to initiate particle movement.

Variables and their meanings

SymbolMeaningUnit

u*ₜ

Threshold friction velocity

m/s

τₜ

Threshold surface shear stress for particle movement

Pa or N/m²

ρₐ

Air density

kg/m³

SI units and conversions

Threshold Friction Velocity

m/s

Threshold Shear Stress

Pa

Air Density

kg/m³

Conditions of use

  • The threshold shear stress must correspond to the particle type and surface condition being studied.

  • Air density must be expressed in kg/m³.

  • The shear stress must be the relevant aerodynamic surface stress.

  • The friction velocity is a turbulence-related velocity scale, not the ordinary wind speed measured at a weather station.

  • The threshold should be adjusted or interpreted in relation to soil moisture, crusting, vegetation, and particle characteristics.

Limitations and assumptions

  • The equation converts threshold shear stress into friction velocity but does not independently predict threshold stress.

  • Particle size, shape, cohesion, surface roughness, and soil moisture can substantially affect the threshold.

  • Interparticle cohesion is particularly important for fine particles and aggregates.

  • Vegetation and surface crusts can alter aerodynamic stress distribution.

  • The threshold for saltation initiation may differ from the threshold for continued movement after particles are already in motion.

Step-by-step worked examples

ProblemSolutionAnswer

A soil surface has a threshold shear stress of 0.12 Pa, and air density is 1.20 kg/m³. Calculate threshold friction velocity.

  • Given: τₜ = 0.12 Pa.

  • ρₐ = 1.20 kg/m³.

  • Use: u*ₜ = √(τₜ/ρₐ).

  • u*ₜ = √(0.12/1.20).

  • u*ₜ = √0.10.

  • u*ₜ ≈ 0.316 m/s.

The threshold friction velocity is approximately 0.316 m/s.

For another surface, threshold shear stress is 0.20 Pa and air density is 1.25 kg/m³. Determine threshold friction velocity.

  • Given: τₜ = 0.20 Pa.

  • ρₐ = 1.25 kg/m³.

  • u*ₜ = √(0.20/1.25).

  • u*ₜ = √0.16.

  • u*ₜ = 0.40 m/s.

The threshold friction velocity is 0.40 m/s.

Real-world applications

  • Wind erosion modeling

  • Dust emission research

  • Desert and dryland surface studies

  • Agricultural soil conservation

  • Aeolian sediment transport analysis

  • Atmospheric dust forecasting

Formula Meaning

Threshold friction velocity is the minimum friction velocity associated with the surface shear stress required to initiate movement of soil particles under specified conditions. It is used in wind-erosion research to characterize the resistance of soil particles to aerodynamic entrainment.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source