Ohm’s law for AC circuits relates complex RMS voltage phasor to complex RMS current phasor through the circuit impedance. Unlike DC resistance, AC impedance includes both resistance and reactance and can produce a phase difference between voltage and current.
Ohm’s Law in AC Circuits
Ohm’s law for AC circuits relates complex RMS voltage phasor to complex RMS current phasor through the circuit impedance. Unlike DC resistance, AC impedance includes both resistance and reactance and can produce a phase difference between voltage and current.
\(\tilde{V} = \tilde{I}Z\)
What this formula means
Scientific principle
Principle
In a linear AC circuit operating at a single sinusoidal frequency, voltage and current phasors are related by complex impedance. Impedance describes the combined opposition of resistance and reactance.
Derivation
For a sinusoidal steady-state circuit, voltage and current can be represented by complex phasors.
Let Ṽ represent the RMS voltage phasor and Ĩ represent the RMS current phasor.
Complex impedance is defined as Z = R + jX, where R is resistance and X is net reactance.
The phasor form of Ohm’s law is Ṽ = ĨZ.
The impedance magnitude is |Z| = √(R² + X²).
The phase angle is φ = tan⁻¹(X/R), using the appropriate quadrant.
Therefore, voltage magnitude is V = I|Z|, while the phase difference is determined by the impedance angle.
Final Result
Ṽ = ĨZ, where Z = R + jX.
Variables and their meanings
Ṽ
Complex RMS voltage phasor.
Ĩ
Complex RMS current phasor.
Z
Complex impedance.
R
Resistance.
X
Net reactance.
J
Imaginary unit, where j² = −1.
Φ
Impedance phase angle.
SI units and conversions
Ṽ
V.
Ĩ
A.
Z
Ω.
R
Ω.
X
Ω.
Φ
rad or degrees.
Conditions of use
The circuit must be linear for the simple impedance relationship.
The circuit should be analyzed in sinusoidal steady state.
Voltage and current phasors must use the same frequency and RMS or peak convention.
Impedance must account for all relevant resistive and reactive elements.
The passive sign convention should be used consistently.
Limitations and assumptions
The formula does not directly describe transient behavior immediately after switching.
Nonlinear components may require more advanced analysis.
Impedance depends on frequency when reactive components are present.
The scalar equation V = IZ is insufficient when phase relationships matter; complex phasors are required.
The ideal component models neglect parasitic effects unless explicitly included.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A theoretical AC circuit has impedance Z = 3 + j4 Ω and RMS current phasor Ĩ = 2∠0° A. Calculate the voltage phasor. |
| Ṽ = 6 + j8 V = 10∠53.13° V. |
A theoretical circuit has RMS voltage phasor Ṽ = 120∠0° V and impedance Z = 12 + j5 Ω. Calculate current magnitude and phase. |
| Current magnitude ≈ 9.23 A, with phase angle ≈ −22.62°. |
Real-world applications
Analyzing household AC electrical circuits.
Designing electrical filters and impedance-matching networks.
Studying voltage-current phase relationships.
Analyzing industrial AC systems.
Understanding electrical power and reactive behavior.
Formula Meaning
Ohm’s law for AC circuits relates complex RMS voltage phasor to complex RMS current phasor through the circuit impedance. Unlike DC resistance, AC impedance includes both resistance and reactance and can produce a phase difference between voltage and current.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.