The equivalent resistance of resistors connected in series is the sum of their individual resistances.
Series Resistance Equivalent
The equivalent resistance of resistors connected in series is the sum of their individual resistances.
\(R_{\mathrm{eq}} = R_{1} + R_{2} + \cdots + R_{n}\)
What this formula means
Scientific principle
Principle
In a series connection, the same current passes through every resistor. The total voltage across the combination equals the sum of the individual voltage drops.
Derivation
Let R₁, R₂, …, Rₙ represent series resistances.
The same current I flows through every resistor.
By Ohm’s law, the voltage across resistor k is Vₖ = IRₖ.
The total voltage is V = V₁ + V₂ + ⋯ + Vₙ.
Substituting the individual voltage drops gives V = IR₁ + IR₂ + ⋯ + IRₙ.
Factor out the common current: V = I(R₁ + R₂ + ⋯ + Rₙ).
Since V = IR_eq, the equivalent resistance is R_eq = R₁ + R₂ + ⋯ + Rₙ.
Final Result
R_eq = ∑ₖ₌₁ⁿ Rₖ.
Variables and their meanings
R eq
Equivalent series resistance.
Rₖ
Resistance of the kth resistor.
I
Common current through all series resistors.
V
Total applied voltage.
SI units and conversions
R eq
Ω.
Rₖ
Ω.
I
A.
V
V.
Conditions of use
All resistors must be connected in a single series path.
No alternative current path should bypass an individual resistor.
The resistor values should be evaluated at the relevant operating conditions.
The formula applies to ideal lumped resistors.
Limitations and assumptions
It does not directly apply to resistors connected in parallel.
Temperature-dependent resistance can change the equivalent value.
Real components may have parasitic inductance and capacitance.
A network containing branching nodes must first be simplified appropriately.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
Three resistors of 4 Ω, 6 Ω and 10 Ω are connected in series. Calculate equivalent resistance. |
| Equivalent resistance = 20 Ω. |
Four series resistors have values 2 Ω, 3 Ω, 5 Ω and 8 Ω. Calculate the equivalent resistance. |
| Equivalent resistance = 18 Ω. |
Real-world applications
Designing voltage-divider circuits.
Analyzing resistor networks.
Calculating total resistance in series-connected components.
Studying current-limiting circuits.
Simplifying electrical circuit models.
Formula Meaning
The equivalent resistance of resistors connected in series is the sum of their individual resistances.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.