The reciprocal of the equivalent resistance of parallel resistors equals the sum of the reciprocals of their individual resistances.
Parallel Resistance Equivalent
The reciprocal of the equivalent resistance of parallel resistors equals the sum of the reciprocals of their individual resistances.
\(1/R_{\mathrm{eq}} = 1/R_{1} + 1/R_{2} + \cdots + 1/R_{n}\)
What this formula means
Scientific principle
Principle
In a parallel connection, every resistor has the same voltage across it, while the total current equals the sum of the branch currents.
Derivation
Let R₁, R₂, …, Rₙ represent parallel resistances.
Each branch has the same voltage V.
By Ohm’s law, branch current Iₖ = V/Rₖ.
Total current is I = I₁ + I₂ + ⋯ + Iₙ.
Substituting branch currents gives I = V(1/R₁ + 1/R₂ + ⋯ + 1/Rₙ).
For the equivalent resistance, I = V/R_eq.
Equating the expressions and dividing by V gives 1/R_eq = ∑(1/Rₖ).
Final Result
1/R_eq = ∑ₖ₌₁ⁿ 1/Rₖ.
Variables and their meanings
R eq
Equivalent parallel resistance.
Rₖ
Resistance of branch k.
I
Total current.
Iₖ
Current through branch k.
V
Common voltage across all branches.
SI units and conversions
R eq
Ω.
Rₖ
Ω.
I
A.
V
V.
Conditions of use
Every resistor must be connected across the same two electrical nodes.
All branch resistances must be represented using consistent units.
The formula assumes ideal lumped resistors.
The equivalent resistance is positive for ordinary positive resistors.
Limitations and assumptions
The formula does not apply directly to a simple series connection.
Nonlinear components cannot generally be replaced using fixed resistance values.
Temperature-dependent resistors may change value during operation.
A network with mixed series and parallel sections requires stepwise reduction or general circuit analysis.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
Two resistors of 6 Ω and 3 Ω are connected in parallel. Calculate equivalent resistance. |
| Equivalent resistance = 2 Ω. |
Three resistors of 4 Ω, 4 Ω and 2 Ω are connected in parallel. Calculate equivalent resistance. |
| Equivalent resistance = 1 Ω. |
Real-world applications
Analyzing parallel electrical networks.
Calculating equivalent load resistance.
Designing electronic circuit branches.
Understanding current division.
Simplifying electrical network models.
Formula Meaning
The reciprocal of the equivalent resistance of parallel resistors equals the sum of the reciprocals of their individual resistances.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.