✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1505

RLC Resonant Frequency

The ideal resonant frequency of an RLC circuit is the frequency at which inductive reactance and capacitive reactance have equal magnitudes. The formula applies to an ideal series RLC circuit and also gives the ideal undamped natural frequency of a simple parallel RLC circuit with ideal components.

\(f_{0} = 1/(2\pi\sqrt{LC})\)

What this formula means

The ideal resonant frequency of an RLC circuit is the frequency at which inductive reactance and capacitive reactance have equal magnitudes. The formula applies to an ideal series RLC circuit and also gives the ideal undamped natural frequency of a simple parallel RLC circuit with ideal components.

Scientific principle

Principle

An inductor and capacitor exchange stored magnetic and electric energy. Resonance occurs when their reactive effects balance, producing a characteristic natural frequency.

Derivation

  • Inductive reactance is X_L = ωL.

  • Capacitive reactance magnitude is X_C = 1/(ωC).

  • At ideal series resonance, X_L = X_C.

  • Therefore, ωL = 1/(ωC).

  • Multiplying by ωC gives ω²LC = 1.

  • Thus, ω₀ = 1/√(LC).

  • Since ω₀ = 2πf₀, the resonant frequency is f₀ = 1/(2π√(LC)).

Final Result

ω₀ = 1/√(LC), and f₀ = 1/(2π√(LC)).

Variables and their meanings

F₀

Ideal resonant frequency.

Ω₀

Ideal angular resonant frequency.

L

Inductance.

C

Capacitance.

X L

Inductive reactance.

X C

Capacitive reactance magnitude.

SI units and conversions

F₀

Hz.

Ω₀

rad·s⁻¹.

L

H.

C

F.

X L

Ω.

X C

Ω.

Conditions of use

  • The circuit is modeled using ideal inductance and capacitance.

  • L and C are positive and approximately constant.

  • The simple formula is used for an ideal series RLC resonance or the ideal natural frequency of a simple parallel RLC network.

  • The frequency must be interpreted in the context of the actual circuit topology.

Limitations and assumptions

  • The formula does not include component losses or parasitic effects.

  • In a series RLC circuit, resistance affects damping and bandwidth but not the ideal undamped frequency expression.

  • The frequency of maximum response in practical loaded circuits can differ from the ideal value.

  • Complex multi-resonant networks may require a full frequency-response analysis.

Step-by-step worked examples

ProblemSolutionAnswer

An ideal RLC circuit has L = 0.1 H and C = 100 μF. Calculate its resonant frequency.

  • Convert C = 100 × 10⁻⁶ F = 0.0001 F.

  • f₀ = 1/(2π√(LC)).

  • f₀ = 1/(2π√(0.1 × 0.0001)).

  • f₀ = 1/(2π√0.00001).

  • f₀ ≈ 50.33 Hz.

Ideal resonant frequency ≈ 50.3 Hz.

An ideal circuit has L = 10 mH and C = 1 μF. Calculate f₀.

  • L = 0.01 H and C = 0.000001 F.

  • f₀ = 1/(2π√(0.01 × 0.000001)).

  • f₀ = 1/(2π × 0.0001).

  • f₀ ≈ 1591.55 Hz.

Ideal resonant frequency ≈ 1.59 kHz.

Real-world applications

  • Designing radio-frequency tuning circuits.

  • Analyzing resonant filters.

  • Studying energy exchange between inductors and capacitors.

  • Designing oscillators.

  • Understanding frequency-selective electrical networks.

Formula Meaning

The ideal resonant frequency of an RLC circuit is the frequency at which inductive reactance and capacitive reactance have equal magnitudes. The formula applies to an ideal series RLC circuit and also gives the ideal undamped natural frequency of a simple parallel RLC circuit with ideal components.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source