The damped natural angular frequency of a series RLC circuit describes the oscillation frequency of its underdamped natural response. It is lower than the undamped natural angular frequency because resistance dissipates energy.
Damped RLC Natural Frequency
The damped natural angular frequency of a series RLC circuit describes the oscillation frequency of its underdamped natural response. It is lower than the undamped natural angular frequency because resistance dissipates energy.
\(\omega_{\mathrm{d}} = \sqrt{\omega_{0}^{2} - \alpha^{2}} = \sqrt{1/(LC) - (R/2L)^{2}}\)
What this formula means
Scientific principle
Principle
A series RLC circuit combines inductive and capacitive energy storage with resistive energy dissipation. When the resistance is sufficiently small, the circuit oscillates while its amplitude decays exponentially.
Derivation
For a source-free series RLC circuit, Kirchhoff’s Voltage Law gives L(d²q/dt²) + R(dq/dt) + q/C = 0.
Divide by L to obtain d²q/dt² + (R/L)(dq/dt) + q/(LC) = 0.
Compare with the standard damped oscillator equation d²q/dt² + 2α(dq/dt) + ω₀²q = 0.
Therefore, α = R/(2L) and ω₀ = 1/√(LC).
For the underdamped case, the oscillatory angular frequency is ω_d = √(ω₀² − α²).
Substituting the expressions for α and ω₀ gives ω_d = √(1/(LC) − (R/2L)²).
Final Result
ω_d = √(1/(LC) − R²/(4L²)), valid for the underdamped series RLC response.
Variables and their meanings
Ω d
Damped natural angular frequency.
Ω₀
Undamped natural angular frequency.
Α
Damping coefficient.
R
Series resistance.
L
Inductance.
C
Capacitance.
Q
Stored capacitor charge.
SI units and conversions
Ω d
rad·s⁻¹.
Ω₀
rad·s⁻¹.
Α
s⁻¹.
R
Ω.
L
H.
C
F.
Q
C.
Conditions of use
The formula applies to the natural response of a series RLC circuit.
The circuit must be underdamped: α < ω₀.
Equivalently, R < 2√(L/C) for positive ideal component values.
R, L and C are assumed constant.
The circuit is modeled using ideal lumped components.
Limitations and assumptions
At critical damping, ω_d = 0 and the response is not oscillatory.
For overdamping, the expression inside the square root is negative and no real oscillation frequency exists.
The formula does not directly describe a driven steady-state resonance.
Parasitic effects and frequency-dependent losses are neglected.
The formula is topology-specific and should not be applied unchanged to every parallel RLC circuit.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A theoretical series RLC circuit has L = 1 H, C = 0.01 F and R = 2 Ω. Calculate the damped natural angular frequency. |
| Damped natural angular frequency ≈ 9.95 rad·s⁻¹. |
A series RLC model has L = 0.5 H, C = 0.002 F and R = 5 Ω. Calculate ω_d. |
| Damped natural angular frequency ≈ 31.22 rad·s⁻¹. |
Real-world applications
Analyzing transient oscillations in RLC circuits.
Studying damping in electrical networks.
Designing resonant filters.
Understanding oscillatory energy exchange with resistive losses.
Comparing ideal and damped circuit responses.
Formula Meaning
The damped natural angular frequency of a series RLC circuit describes the oscillation frequency of its underdamped natural response. It is lower than the undamped natural angular frequency because resistance dissipates energy.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.