The bandwidth of a resonant circuit is the difference between its upper and lower half-power frequencies. For a conventional second-order resonant response, bandwidth equals resonant frequency divided by quality factor.
Bandwidth of a Resonant Circuit
The bandwidth of a resonant circuit is the difference between its upper and lower half-power frequencies. For a conventional second-order resonant response, bandwidth equals resonant frequency divided by quality factor.
\(BW = f_{2} - f_{1} = f_{0}/Q\)
What this formula means
Scientific principle
Principle
A resonant circuit responds strongly near its resonant frequency. The bandwidth describes the frequency range over which the response remains above the half-power threshold. The quality factor measures how sharply the circuit responds around resonance.
Derivation
Let f₁ represent the lower half-power frequency.
Let f₂ represent the upper half-power frequency.
Bandwidth is defined as BW = f₂ − f₁.
For a conventional second-order resonator, quality factor is Q = f₀/BW.
Rearranging gives BW = f₀/Q.
For a series RLC circuit, Q = ω₀L/R = 1/(ω₀CR).
Therefore, BW = R/(2πL) in hertz for an ideal series RLC circuit.
Final Result
BW = f₂ − f₁ = f₀/Q. For an ideal series RLC circuit, BW = R/(2πL).
Variables and their meanings
BW
Bandwidth.
F₁
Lower half-power frequency.
F₂
Upper half-power frequency.
F₀
Resonant frequency.
Q
Quality factor.
R
Series resistance.
L
Inductance.
C
Capacitance.
SI units and conversions
BW
Hz.
F₁
Hz.
F₂
Hz.
F₀
Hz.
Q
Dimensionless.
R
Ω.
L
H.
C
F.
Conditions of use
The lower and upper frequencies must be defined using the same half-power criterion.
The resonator should behave approximately as a second-order system.
The equation BW = f₀/Q applies when Q is defined using the corresponding resonant bandwidth.
For the series RLC expression, the circuit must use the ideal series topology.
Limitations and assumptions
The formula does not describe arbitrary filter bandwidth definitions.
Loaded and unloaded quality factors may differ.
Component tolerances and parasitic losses affect practical bandwidth.
The exact response shape depends on circuit topology and measurement convention.
The approximation should not be applied indiscriminately to multi-resonant systems.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A resonant circuit has f₀ = 1000 Hz and quality factor Q = 20. Calculate bandwidth. |
| Bandwidth = 50 Hz. |
A resonant circuit has lower half-power frequency f₁ = 900 Hz and upper half-power frequency f₂ = 1100 Hz. Calculate bandwidth. |
| Bandwidth = 200 Hz. |
Real-world applications
Designing radio and communication filters.
Analyzing frequency-selective circuits.
Determining resonator selectivity.
Designing band-pass and band-stop networks.
Studying quality factor and energy losses.
Formula Meaning
The bandwidth of a resonant circuit is the difference between its upper and lower half-power frequencies. For a conventional second-order resonant response, bandwidth equals resonant frequency divided by quality factor.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.