✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1509

AC Average Power

Average AC power is the time-averaged rate of electrical energy transfer in a sinusoidal steady-state circuit. It equals the product of RMS voltage, RMS current and the cosine of the phase difference between them.

\(P = V_{rms} I_{rms} \cos \phi\)

What this formula means

Average AC power is the time-averaged rate of electrical energy transfer in a sinusoidal steady-state circuit. It equals the product of RMS voltage, RMS current and the cosine of the phase difference between them.

Scientific principle

Principle

Instantaneous AC power is the product of instantaneous voltage and current. When voltage and current have a phase difference, only part of the apparent volt-ampere product is converted into average real power.

Derivation

  • Let v(t) = √2 Vᵣₘₛ cos(ωt) and i(t) = √2 Iᵣₘₛ cos(ωt − φ).

  • Instantaneous power is p(t) = v(t)i(t).

  • Using the trigonometric product identity gives p(t) = VᵣₘₛIᵣₘₛ[cos φ + cos(2ωt − φ)].

  • The second term oscillates at twice the supply frequency and has zero average over a complete cycle.

  • The remaining average term is P = VᵣₘₛIᵣₘₛ cos φ.

  • The quantity cos φ is called the power factor for sinusoidal voltage and current.

Final Result

P = VᵣₘₛIᵣₘₛ cos φ.

Variables and their meanings

P

Average real electrical power.

Vᵣₘₛ

RMS voltage.

Iᵣₘₛ

RMS current.

Φ

Phase angle between voltage and current.

Cos φ

Displacement power factor for sinusoidal conditions.

Ω

Angular supply frequency.

SI units and conversions

P

W.

Vᵣₘₛ

V.

Iᵣₘₛ

A.

Φ

rad or degrees.

Cos φ

Dimensionless.

Conditions of use

  • Voltage and current are sinusoidal and have the same frequency.

  • RMS values must be used consistently.

  • The phase angle must represent the voltage-current phase difference.

  • The equation describes average real power over complete cycles.

Limitations and assumptions

  • For distorted waveforms, the displacement power factor alone may not represent the true power factor.

  • For nonsinusoidal systems, real power should be calculated using the average of instantaneous power.

  • The equation does not directly give reactive or apparent power.

  • The formula assumes steady-state operation rather than arbitrary transients.

Step-by-step worked examples

ProblemSolutionAnswer

A sinusoidal AC circuit has RMS voltage 230 V, RMS current 5 A and power factor 0.8. Calculate average real power.

  • P = VᵣₘₛIᵣₘₛ cos φ.

  • P = 230 × 5 × 0.8.

  • P = 920 W.

Average real power = 920 W.

A theoretical AC circuit has RMS voltage 120 V, RMS current 2 A and phase angle 60°. Calculate average power.

  • P = 120 × 2 × cos 60°.

  • P = 240 × 0.5.

  • P = 120 W.

Average real power = 120 W.

Real-world applications

  • Calculating real power in AC electrical systems.

  • Analyzing household and industrial electrical loads.

  • Studying power factor.

  • Evaluating energy consumption.

  • Designing electrical distribution systems.

Formula Meaning

Average AC power is the time-averaged rate of electrical energy transfer in a sinusoidal steady-state circuit. It equals the product of RMS voltage, RMS current and the cosine of the phase difference between them.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source