✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1511

Apparent Power

Apparent power is the product of RMS voltage and RMS current in a single-phase AC circuit. It represents the magnitude of complex power and combines real power and reactive power.

\(S = V_{rms} I_{rms} = \sqrt{P^{2} + Q^{2}}\)

What this formula means

Apparent power is the product of RMS voltage and RMS current in a single-phase AC circuit. It represents the magnitude of complex power and combines real power and reactive power.

Scientific principle

Principle

In AC circuits, voltage and current may have a phase difference. The total volt-ampere product is therefore divided into real and reactive components, which together form complex power.

Derivation

  • Let Vᵣₘₛ and Iᵣₘₛ represent RMS voltage and current.

  • The magnitude of apparent power is defined as S = VᵣₘₛIᵣₘₛ.

  • For sinusoidal steady-state operation, real power is P = VᵣₘₛIᵣₘₛ cos φ.

  • Reactive power is Q = VᵣₘₛIᵣₘₛ sin φ.

  • Using sin²φ + cos²φ = 1 gives P² + Q² = (VᵣₘₛIᵣₘₛ)².

  • Taking the square root gives S = √(P² + Q²).

Final Result

S = VᵣₘₛIᵣₘₛ = √(P² + Q²).

Variables and their meanings

S

Apparent power magnitude.

Vᵣₘₛ

Root-mean-square voltage.

Iᵣₘₛ

Root-mean-square current.

P

Average real power.

Q

Reactive power.

Φ

Phase angle between voltage and current.

SI units and conversions

S

VA.

Vᵣₘₛ

V.

Iᵣₘₛ

A.

P

W.

Q

var.

Φ

rad or degrees.

Conditions of use

  • RMS voltage and current must be used.

  • The circuit must be evaluated using consistent electrical reference conventions.

  • The relationship S² = P² + Q² applies directly to sinusoidal steady-state single-phase conditions.

  • Voltage and current must refer to the same circuit boundary.

Limitations and assumptions

  • For distorted nonsinusoidal waveforms, apparent power remains VᵣₘₛIᵣₘₛ, but S² = P² + Q² may not account for distortion power.

  • Apparent power is not the same as real energy consumption.

  • Three-phase systems require the appropriate three-phase power relationship.

  • The formula does not independently identify whether a load is inductive or capacitive.

Step-by-step worked examples

ProblemSolutionAnswer

An AC load operates at 230 V RMS and draws 4 A RMS. Calculate its apparent power.

  • S = VᵣₘₛIᵣₘₛ.

  • S = 230 × 4.

  • S = 920 VA.

Apparent power = 920 VA.

A sinusoidal AC circuit has real power 600 W and reactive power 800 var. Calculate apparent power.

  • S = √(P² + Q²).

  • S = √(600² + 800²).

  • S = √(360000 + 640000).

  • S = √1000000.

  • S = 1000 VA.

Apparent power = 1000 VA.

Real-world applications

  • Determining transformer and generator ratings.

  • Sizing electrical distribution equipment.

  • Analyzing AC loads.

  • Understanding real, reactive and apparent power.

  • Evaluating electrical system capacity.

Formula Meaning

Apparent power is the product of RMS voltage and RMS current in a single-phase AC circuit. It represents the magnitude of complex power and combines real power and reactive power.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source