✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1512

Power Factor

Power factor is the ratio of real power to apparent power in a sinusoidal AC circuit. It indicates how effectively apparent power is converted into average real power.

\(PF = \cos \phi = P/S\)

What this formula means

Power factor is the ratio of real power to apparent power in a sinusoidal AC circuit. It indicates how effectively apparent power is converted into average real power.

Scientific principle

Principle

When voltage and current are out of phase, their product includes both real and reactive components. The cosine of their phase difference determines the ratio of real power to apparent power for sinusoidal conditions.

Derivation

  • Real AC power is P = VᵣₘₛIᵣₘₛ cos φ.

  • Apparent power is S = VᵣₘₛIᵣₘₛ.

  • Divide real power by apparent power.

  • P/S = (VᵣₘₛIᵣₘₛ cos φ)/(VᵣₘₛIᵣₘₛ).

  • Cancel the common voltage and current magnitudes.

  • Therefore, PF = P/S = cos φ.

Final Result

PF = cos φ = P/S for sinusoidal voltage and current.

Variables and their meanings

PF

Power factor.

Φ

Phase angle between voltage and current.

P

Average real power.

S

Apparent power magnitude.

Vᵣₘₛ

RMS voltage.

Iᵣₘₛ

RMS current.

SI units and conversions

PF

Dimensionless.

Φ

rad or degrees.

P

W.

S

VA.

Vᵣₘₛ

V.

Iᵣₘₛ

A.

Conditions of use

  • The simple PF = cos φ expression applies to sinusoidal voltage and current.

  • Real and apparent power must be measured at the same circuit boundary.

  • RMS quantities must be used for apparent power.

  • The phase angle must be defined consistently.

Limitations and assumptions

  • For nonsinusoidal waveforms, true power factor is P/(VᵣₘₛIᵣₘₛ) and may differ from the displacement factor cos φ.

  • Power factor alone does not specify the direction of reactive power.

  • A low power factor can increase current for a given real power and voltage.

  • The formula does not directly describe transient circuit operation.

Step-by-step worked examples

ProblemSolutionAnswer

An AC circuit consumes 800 W of real power and has an apparent power of 1000 VA. Calculate its power factor.

  • PF = P/S.

  • PF = 800/1000.

  • PF = 0.8.

Power factor = 0.8.

The phase difference between voltage and current in an ideal sinusoidal AC circuit is 30°. Calculate the power factor.

  • PF = cos φ.

  • PF = cos 30°.

  • PF = √3/2.

  • PF ≈ 0.866.

Power factor ≈ 0.866.

Real-world applications

  • Evaluating electrical load efficiency.

  • Power-factor correction studies.

  • Reducing unnecessary current in electrical distribution systems.

  • Assessing industrial motor loads.

  • Determining apparent power requirements.

Formula Meaning

Power factor is the ratio of real power to apparent power in a sinusoidal AC circuit. It indicates how effectively apparent power is converted into average real power.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source