The voltage divider rule calculates the voltage across one resistor in a series resistor network. The voltage across each resistor is proportional to its resistance when the same current flows through all series elements.
Voltage Divider Rule
The voltage divider rule calculates the voltage across one resistor in a series resistor network. The voltage across each resistor is proportional to its resistance when the same current flows through all series elements.
\(V_{k} = V_{\mathrm{total}} \times R_{k}/(R_{1} + R_{2} + \cdots + R_{n})\)
What this formula means
Scientific principle
Principle
In a series circuit, current is common to all resistors. Ohm's law therefore makes each voltage drop proportional to the corresponding resistance.
Derivation
For n resistors in series, the equivalent resistance is R_eq = ∑Rₖ.
The circuit current is I = V_total/R_eq.
The voltage across resistor k is Vₖ = IRₖ.
Substitute the current expression: Vₖ = (V_total/R_eq)Rₖ.
Therefore, Vₖ = V_total × Rₖ/(∑Rₖ).
Final Result
Vₖ = V_total × Rₖ/(∑ₖ₌₁ⁿRₖ).
Variables and their meanings
Vₖ
Voltage across the selected resistor.
V total
Total applied voltage across the series network.
Rₖ
Resistance of the selected resistor.
R₁, R₂, …, Rₙ
Individual series resistances.
I
Common series current.
SI units and conversions
Vₖ
V.
V total
V.
Rₖ
Ω.
I
A.
Conditions of use
The resistors must form a series path.
The same current must flow through every resistor.
The resistance values must be known under operating conditions.
For a loaded divider, the load resistance must be included in the network calculation.
Limitations and assumptions
A load connected across one divider resistor changes the effective resistance and output voltage.
The simple formula is not directly applicable to arbitrary parallel networks.
Nonlinear components may not have constant resistance.
Component tolerances can cause output-voltage deviations.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
Two resistors of 2 kΩ and 4 kΩ are connected in series across a 12 V source. Calculate the voltage across the 4 kΩ resistor. |
| Voltage across the 4 kΩ resistor = 8 V. |
Three series resistors have values 1 kΩ, 2 kΩ and 3 kΩ and are connected across 24 V. Calculate the voltage across the 2 kΩ resistor. |
| Voltage across the 2 kΩ resistor = 8 V. |
Real-world applications
Designing voltage-divider networks.
Generating reference voltages.
Signal conditioning circuits.
Sensor interface circuits.
Biasing electronic components.
Formula Meaning
The voltage divider rule calculates the voltage across one resistor in a series resistor network. The voltage across each resistor is proportional to its resistance when the same current flows through all series elements.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.