✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1515

Current Divider Rule

The current divider rule calculates the current through one branch of a parallel resistor network. Current divides inversely in proportion to branch resistance.

\(I_{k} = I_{\mathrm{total}} \times (1/R_{k})/(\sum_{m=1}^{n} 1/R_{m})\)

What this formula means

The current divider rule calculates the current through one branch of a parallel resistor network. Current divides inversely in proportion to branch resistance.

Scientific principle

Principle

All parallel branches share the same voltage, while total current equals the sum of branch currents. Since each branch current is V/R, lower-resistance branches carry larger currents.

Derivation

  • For n parallel resistors, the common voltage is V.

  • The current through branch k is Iₖ = V/Rₖ.

  • Total current is I_total = ∑(V/Rₘ).

  • Factor out the common voltage: I_total = V∑(1/Rₘ).

  • Rearrange to obtain V = I_total/[∑(1/Rₘ)].

  • Substitute into Iₖ = V/Rₖ.

  • Therefore, Iₖ = I_total × (1/Rₖ)/[∑(1/Rₘ)].

Final Result

Iₖ = I_total × (1/Rₖ)/∑ₘ₌₁ⁿ(1/Rₘ).

Variables and their meanings

Iₖ

Current through selected parallel branch k.

I total

Total current entering the parallel network.

Rₖ

Resistance of the selected branch.

Rₘ

Resistance of parallel branch m.

V

Common voltage across all parallel branches.

SI units and conversions

Iₖ

A.

I total

A.

Rₖ

Ω.

Rₘ

Ω.

V

V.

Conditions of use

  • All resistors must be connected across the same two nodes.

  • The branch resistances must be known.

  • The network should be modeled using fixed linear resistances.

  • The total current must refer to the current entering the complete parallel network.

Limitations and assumptions

  • The formula is derived for parallel resistors and should not be used unchanged for series resistors.

  • A branch containing nonlinear components may require a different current-voltage model.

  • Temperature-dependent resistance can change current division.

  • Additional branches must be included in the denominator.

Step-by-step worked examples

ProblemSolutionAnswer

A total current of 6 A enters two parallel resistors of 2 Ω and 4 Ω. Calculate the current through the 2 Ω branch.

  • I₂Ω = I_total × (1/2)/(1/2 + 1/4).

  • I₂Ω = 6 × (1/2)/(3/4).

  • I₂Ω = 6 × 2/3.

  • I₂Ω = 4 A.

Current through the 2 Ω branch = 4 A.

A total current of 12 A enters three parallel branches with resistances 3 Ω, 6 Ω and 2 Ω. Calculate the current through the 6 Ω branch.

  • I₆Ω = 12 × (1/6)/(1/3 + 1/6 + 1/2).

  • The denominator is 2/6 + 1/6 + 3/6 = 1.

  • I₆Ω = 12 × 1/6.

  • I₆Ω = 2 A.

Current through the 6 Ω branch = 2 A.

Real-world applications

  • Analyzing parallel resistor networks.

  • Calculating branch currents.

  • Designing current-sensing circuits.

  • Understanding current distribution in electrical systems.

  • Simplifying parallel network calculations.

Formula Meaning

The current divider rule calculates the current through one branch of a parallel resistor network. Current divides inversely in proportion to branch resistance.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source