The Thevenin equivalent voltage is the open-circuit voltage measured across the two terminals of a linear two-terminal network. It is the voltage source used in the Thevenin equivalent circuit.
Thevenin Equivalent Voltage
The Thevenin equivalent voltage is the open-circuit voltage measured across the two terminals of a linear two-terminal network. It is the voltage source used in the Thevenin equivalent circuit.
\(V_{\mathrm{th}} = V_{\mathrm{oc}}\)
What this formula means
Scientific principle
Principle
Thevenin’s theorem states that a linear two-terminal network can be represented externally by an ideal voltage source in series with an equivalent resistance or impedance. The source voltage equals the original network's open-circuit terminal voltage.
Derivation
Identify the two output terminals of the network.
Disconnect the external load so that the output terminals are open-circuited.
Calculate or measure the voltage across the open terminals.
By definition, this open-circuit voltage is V_oc.
The Thevenin equivalent voltage is therefore V_th = V_oc.
The equivalent resistance or impedance is determined separately by examining the network seen from the same terminals.
Final Result
V_th = V_oc.
Variables and their meanings
V th
Thevenin equivalent voltage.
V oc
Open-circuit terminal voltage.
R th
Thevenin equivalent resistance, determined separately.
Z th
Thevenin equivalent impedance for an AC network.
SI units and conversions
V th
V.
V oc
V.
R th
Ω.
Z th
Ω.
Conditions of use
The original network must be linear for the conventional Thevenin theorem.
The external load must be disconnected when finding open-circuit voltage.
The output terminals must be clearly specified.
For AC circuits, use complex phasor voltage and impedance at the frequency of interest.
Limitations and assumptions
A single constant Thevenin equivalent may not represent a nonlinear network over all operating conditions.
Thevenin voltage alone does not determine the complete equivalent circuit; R_th or Z_th is also needed.
Dependent sources must remain active when determining equivalent resistance using suitable test-source methods.
The equivalent circuit is valid only from the selected pair of terminals.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A linear network has an open-circuit terminal voltage of 18 V. Determine its Thevenin equivalent voltage. |
| Thevenin equivalent voltage = 18 V. |
A voltage-divider network has a 20 V source, with a 4 kΩ resistor connected from the source to the output node and a 6 kΩ resistor connected from the output node to ground. Calculate the open-circuit output voltage. |
| Thevenin equivalent voltage = 12 V. |
Real-world applications
Simplifying complex linear electrical networks.
Analyzing load behavior at selected terminals.
Designing equivalent circuit models.
Studying sensor and measurement interfaces.
Solving circuit problems using Thevenin’s theorem.
Formula Meaning
The Thevenin equivalent voltage is the open-circuit voltage measured across the two terminals of a linear two-terminal network. It is the voltage source used in the Thevenin equivalent circuit.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.