✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1517

Norton Equivalent Current

The Norton equivalent current is the short-circuit current measured between the two output terminals of a linear two-terminal network. It represents the ideal current source in the Norton equivalent circuit.

\(I_{\mathrm{N}} = I_{\mathrm{sc}}\)

What this formula means

The Norton equivalent current is the short-circuit current measured between the two output terminals of a linear two-terminal network. It represents the ideal current source in the Norton equivalent circuit.

Scientific principle

Principle

Norton’s theorem represents a linear two-terminal network by an ideal current source in parallel with an equivalent resistance or impedance. The source current equals the short-circuit current at the output terminals.

Derivation

  • Identify the two output terminals of the network.

  • Connect the terminals through an ideal short circuit.

  • Determine the current flowing through the short circuit.

  • This current is defined as I_sc.

  • The Norton equivalent current is therefore I_N = I_sc.

  • For a network with a valid Thevenin equivalent, the relationship between the equivalent parameters is I_N = V_th/R_th for a resistive DC network.

Final Result

I_N = I_sc; for a resistive linear network with R_th ≠ 0, I_N = V_th/R_th.

Variables and their meanings

I N

Norton equivalent current.

I sc

Short-circuit current at the output terminals.

V th

Thevenin equivalent voltage.

R th

Thevenin equivalent resistance.

SI units and conversions

I N

A.

I sc

A.

V th

V.

R th

Ω.

Conditions of use

  • The original network must be linear for the conventional Norton theorem.

  • The short-circuit current must be determined at the specified output terminals.

  • For the relation I_N = V_th/R_th, the equivalent resistance must be finite and nonzero.

  • For AC networks, use complex phasors and impedance at the frequency of interest.

Limitations and assumptions

  • Norton current alone does not determine the complete equivalent circuit; the parallel equivalent resistance or impedance is also required.

  • A nonlinear network generally cannot be represented by one fixed Norton equivalent over all operating conditions.

  • Dependent sources must be treated correctly when determining equivalent resistance.

  • The short-circuit method is a theoretical circuit-analysis method; practical measurement must account for current and equipment limits.

Step-by-step worked examples

ProblemSolutionAnswer

A linear network produces a short-circuit current of 3 A at its output terminals. Determine its Norton equivalent current.

  • I_N = I_sc.

  • I_N = 3 A.

Norton equivalent current = 3 A.

A network has Thevenin voltage 12 V and Thevenin resistance 4 Ω. Calculate its Norton equivalent current.

  • I_N = V_th/R_th.

  • I_N = 12/4.

  • I_N = 3 A.

Norton equivalent current = 3 A.

Real-world applications

  • Simplifying linear electrical networks.

  • Analyzing parallel load configurations.

  • Converting Thevenin equivalents into Norton equivalents.

  • Modeling current-source behavior.

  • Studying electrical network terminal characteristics.

Formula Meaning

The Norton equivalent current is the short-circuit current measured between the two output terminals of a linear two-terminal network. It represents the ideal current source in the Norton equivalent circuit.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source