✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1518

Diode Shockley Equation

The Shockley diode equation describes the idealized current-voltage relationship of a semiconductor p–n junction diode. It shows that forward current increases approximately exponentially with forward voltage under the model assumptions.

\(I_{\mathrm{D}} = I_{\mathrm{S}}[\exp(V_{\mathrm{D}}/(nV_{\mathrm{T}})) - 1]\)

What this formula means

The Shockley diode equation describes the idealized current-voltage relationship of a semiconductor p–n junction diode. It shows that forward current increases approximately exponentially with forward voltage under the model assumptions.

Scientific principle

Principle

A p–n junction contains a depletion region and an internal potential barrier. Applied voltage changes the carrier distribution across the junction, producing a strongly nonlinear current-voltage relationship.

Derivation

  • The ideal diode model assumes carrier transport governed by diffusion across the p–n junction.

  • Under applied junction voltage V_D, the minority-carrier injection concentration changes according to the Boltzmann factor exp(V_D/V_T).

  • For an ideal junction, the resulting diffusion current is proportional to exp(V_D/V_T) − 1.

  • A practical ideality factor n is included to represent deviations from ideal transport behavior.

  • The thermal voltage is V_T = k_BT/q.

  • Substituting thermal voltage gives I_D = I_S[exp(V_D/(nV_T)) − 1].

Final Result

I_D = I_S[exp(V_D/(nV_T)) − 1].

Variables and their meanings

I D

Diode current, positive in the forward-current reference direction.

I S

Reverse saturation current parameter.

V D

Voltage across the diode, positive for forward bias under the usual convention.

N

Ideality factor, commonly between approximately 1 and 2 in many practical operating regions.

V T

Thermal voltage.

K B

Boltzmann constant.

T

Absolute junction temperature.

Q

Magnitude of the elementary charge.

SI units and conversions

I D

A.

I S

A.

V D

V.

N

Dimensionless.

V T

V.

K B

J·K⁻¹.

T

K.

Q

C.

Conditions of use

  • The diode is modeled as a p–n junction in a region where the Shockley approximation is appropriate.

  • The junction temperature is treated as known and approximately constant.

  • The ideality factor and saturation-current parameter must correspond to the device and operating region.

  • The diode current and voltage reference directions must follow a consistent convention.

Limitations and assumptions

  • The ideal equation neglects series resistance, shunt leakage paths and high-current effects.

  • At high forward current, series resistance can dominate the terminal voltage.

  • At high reverse voltage, breakdown behavior is not represented.

  • Recombination, high-level injection and temperature-dependent parameter changes can cause deviations.

  • The exponential model may require numerical methods for practical circuit solutions.

Step-by-step worked examples

ProblemSolutionAnswer

A theoretical diode model has I_S = 1 nA, n = 1 and V_T = 25.85 mV. Calculate the model current at V_D = 0.10 V.

  • I_D = I_S[exp(V_D/(nV_T)) − 1].

  • I_D = 10⁻⁹[exp(0.10/0.02585) − 1] A.

  • 0.10/0.02585 ≈ 3.868.

  • exp(3.868) ≈ 47.9.

  • I_D ≈ 10⁻⁹(46.9) A.

  • I_D ≈ 46.9 nA.

Idealized model current ≈ 46.9 nA.

For a theoretical diode model, let I_S = 2 nA, n = 2, V_T = 25.85 mV and V_D = 0.20 V. Calculate I_D.

  • I_D = 2 × 10⁻⁹[exp(0.20/(2 × 0.02585)) − 1] A.

  • The exponent is approximately 3.868.

  • exp(3.868) − 1 ≈ 46.9.

  • I_D ≈ 2 × 10⁻⁹ × 46.9 A.

  • I_D ≈ 93.8 nA.

Idealized model current ≈ 93.8 nA.

Real-world applications

  • Modeling semiconductor diode characteristics.

  • Analyzing rectifier circuits.

  • Studying p–n junction behavior.

  • Understanding temperature effects in semiconductor devices.

  • Developing nonlinear diode circuit models.

Formula Meaning

The Shockley diode equation describes the idealized current-voltage relationship of a semiconductor p–n junction diode. It shows that forward current increases approximately exponentially with forward voltage under the model assumptions.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source