Diode dynamic resistance is the small-signal resistance obtained from the slope of the diode voltage-current characteristic at a specified operating point. It describes the incremental voltage change associated with a small current change.
Diode Dynamic Resistance
Diode dynamic resistance is the small-signal resistance obtained from the slope of the diode voltage-current characteristic at a specified operating point. It describes the incremental voltage change associated with a small current change.
\(r_{\mathrm{d}} = nV_{\mathrm{T}}/I_{\mathrm{D}}\)
What this formula means
Scientific principle
Principle
A diode is nonlinear, so its resistance depends on the operating point. For sufficiently small variations around a DC operating point, the nonlinear characteristic can be approximated by its local tangent slope.
Derivation
The Shockley equation is I_D = I_S[exp(V_D/(nV_T)) − 1].
Differentiate current with respect to voltage at constant temperature: dI_D/dV_D = (I_S/(nV_T))exp(V_D/(nV_T)).
Dynamic resistance is the reciprocal differential slope: r_d = dV_D/dI_D.
Therefore, r_d = nV_T/[I_S exp(V_D/(nV_T))].
In the forward-bias region where exp(V_D/(nV_T)) ≫ 1, the Shockley equation gives I_D ≈ I_S exp(V_D/(nV_T)).
Substituting the forward-current approximation gives r_d ≈ nV_T/I_D.
Final Result
r_d ≈ nV_T/I_D for forward bias when the exponential term dominates. More generally, r_d = nV_T/(I_D + I_S) under the ideal Shockley model.
Variables and their meanings
R d
Small-signal diode dynamic resistance.
N
Diode ideality factor.
V T
Thermal voltage.
I D
DC diode operating current.
I S
Reverse saturation current parameter.
V D
DC diode operating voltage.
SI units and conversions
R d
Ω.
N
Dimensionless.
V T
V.
I D
A.
I S
A.
V D
V.
Conditions of use
The diode should be operating in a region where the Shockley model is appropriate.
The temperature should remain approximately constant during the small-signal variation.
The signal variation must be sufficiently small around the DC operating point.
The approximation r_d ≈ nV_T/I_D is most useful in forward bias when I_D is much greater than I_S.
Limitations and assumptions
Dynamic resistance is not the same as the DC ratio V_D/I_D.
Series resistance can become important at higher forward currents.
Junction capacitance and diffusion capacitance may affect AC behavior at higher frequencies.
The small-signal model is local and cannot accurately describe large voltage excursions.
Temperature changes can alter both thermal voltage and diode operating current.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A diode has ideality factor n = 1, thermal voltage V_T = 25.85 mV and forward operating current I_D = 1 mA. Calculate approximate dynamic resistance. |
| Approximate dynamic resistance = 25.85 Ω. |
A theoretical diode operates at I_D = 2 mA, with n = 2 and V_T = 25.85 mV. Calculate approximate dynamic resistance. |
| Approximate dynamic resistance = 25.85 Ω. |
Real-world applications
Small-signal diode circuit analysis.
Designing diode-based detectors.
Analyzing rectifier behavior near an operating point.
Developing linearized semiconductor models.
Studying incremental resistance in electronic circuits.
Formula Meaning
Diode dynamic resistance is the small-signal resistance obtained from the slope of the diode voltage-current characteristic at a specified operating point. It describes the incremental voltage change associated with a small current change.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.