✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1523

BJT Current Gain

The common-emitter current gain of a bipolar junction transistor is the ratio of collector current to base current under specified operating conditions.

\(\beta = I_{\mathrm{C}}/I_{\mathrm{B}}\)

What this formula means

The common-emitter current gain of a bipolar junction transistor is the ratio of collector current to base current under specified operating conditions.

Scientific principle

Principle

A BJT is a current-controlled semiconductor device in which a small base current controls a larger collector current. The common-emitter current gain describes this current amplification.

Derivation

  • 1. In a BJT, the terminal currents satisfy I_E = I_C + I_B.

  • 2. The common-emitter current gain is defined as the ratio of collector current to base current.

  • 3. Therefore, β = I_C/I_B.

  • 4. Rearranging gives I_C = βI_B and I_B = I_C/β.

  • 5. The common-base current gain is α = I_C/I_E, and the relationship between the gains is β = α/(1 − α).

Final Result

β = I_C/I_B = α/(1 − α)

Alternative Relation

α = β/(β + 1)

Variables and their meanings

SymbolMeaningUnit

β

Common-emitter current gain

Dimensionless

I_C

Collector current

A

I_B

Base current

A

α

Common-base current gain

Dimensionless

I_E

Emitter current

A

SI units and conversions

Current

A

Current Gain

Dimensionless; it is a ratio of two currents

Dimensional Formula

β and α are dimensionless

Conditions of use

  • The transistor should be operating in a defined region, normally the forward-active region for conventional current-gain calculations.

  • Collector and base currents must be measured under the same operating conditions.

  • The current gain should be identified as DC gain or small-signal gain where relevant.

  • The transistor's temperature and collector current should be considered when selecting a datasheet gain value.

Limitations and assumptions

  • β varies with collector current, collector-emitter voltage, temperature, and manufacturing variation.

  • DC current gain, often written h_FE, is not identical to small-signal current gain, often written h_fe.

  • The ratio can become misleading when base current is extremely small or leakage currents are significant.

  • In saturation, the effective forced current gain may be much lower than the transistor's forward-active β.

  • A high β does not by itself guarantee good switching speed or high-frequency performance.

Step-by-step worked examples

ProblemSolutionAnswer

A BJT has a collector current of 5 mA and a base current of 50 μA. Calculate its common-emitter current gain.

  • Given: I_C = 5 mA = 5000 μA and I_B = 50 μA.

  • Use: β = I_C/I_B.

  • β = 5000/50.

  • β = 100.

The common-emitter current gain is 100.

A transistor has a common-base current gain α = 0.98. Calculate its common-emitter current gain β.

  • Use: β = α/(1 − α).

  • β = 0.98/(1 − 0.98).

  • β = 0.98/0.02.

  • β = 49.

The common-emitter current gain is 49.

Real-world applications

  • Transistor gain characterization

  • BJT bias-network design

  • Common-emitter amplifier analysis

  • Transistor datasheet interpretation

  • Current amplification calculations

Formula Meaning

The common-emitter current gain of a bipolar junction transistor is the ratio of collector current to base current under specified operating conditions.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source