✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1525

BJT Transconductance

BJT transconductance measures how strongly a small change in base-emitter voltage changes the collector current at a specified operating point. For an ideal BJT in forward-active operation, it equals collector current divided by thermal voltage.

\(g_{\mathrm{m}} = I_{\mathrm{C}}/V_{\mathrm{T}} = I_{\mathrm{C}} q/(k_{\mathrm{B}} T)\)

What this formula means

BJT transconductance measures how strongly a small change in base-emitter voltage changes the collector current at a specified operating point. For an ideal BJT in forward-active operation, it equals collector current divided by thermal voltage.

Scientific principle

Principle

The collector current of an ideal BJT in forward-active operation depends exponentially on base-emitter voltage. Differentiating this exponential current-voltage relationship gives the small-signal transconductance.

Derivation

  • 1. The ideal forward-active collector-current relation is I_C = I_S exp(V_BE/V_T), when the reverse-saturation contribution is negligible.

  • 2. Transconductance is defined as the derivative of collector current with respect to base-emitter voltage: g_m = ∂I_C/∂V_BE.

  • 3. Differentiating gives g_m = (I_S/V_T)exp(V_BE/V_T).

  • 4. Since I_C = I_S exp(V_BE/V_T), substitution gives g_m = I_C/V_T.

  • 5. Thermal voltage is V_T = k_B T/q.

  • 6. Therefore, g_m = I_C q/(k_B T).

Final Result

g_m = I_C/V_T = I_C q/(k_B T)

Interpretation

A larger collector bias current produces a larger BJT transconductance at the same temperature.

Variables and their meanings

SymbolMeaningUnit

g_m

Small-signal transconductance

S or A/V

I_C

DC collector operating current

A

V_T

Thermal voltage, V_T = k_B T/q

V

k_B

Boltzmann constant

J/K

T

Absolute temperature

K

q

Magnitude of the elementary charge

C

I_S

Reverse-saturation current parameter in the ideal BJT model

A

SI units and conversions

Transconductance

S = A/V

Thermal Voltage

V

Temperature

K

Dimensional Formula

Transconductance: [M⁻¹ L⁻² T³ I²]

Conditions of use

  • The transistor should be operating in the forward-active region.

  • The collector current should be sufficiently above leakage-dominated levels for the ideal exponential approximation to be useful.

  • The operating temperature must be expressed in kelvin when calculating thermal voltage.

  • The result represents small-signal behaviour around a DC operating point.

  • The applied small-signal variation should be sufficiently small for linearization.

Limitations and assumptions

  • The formula assumes an ideal exponential BJT current-voltage relationship.

  • High-level injection, series resistance, recombination, and self-heating can change the practical result.

  • Transconductance is an operating-point quantity, not a fixed value for the transistor.

  • The formula does not directly describe large-signal transistor behaviour.

  • At approximately 300 K, V_T is about 25.85 mV; this value changes with temperature.

Step-by-step worked examples

ProblemSolutionAnswer

An ideal BJT operates at a collector current of 2 mA at approximately 300 K. Using V_T = 25.85 mV, calculate its transconductance.

  • Given: I_C = 2 mA = 0.002 A and V_T = 25.85 mV = 0.02585 V.

  • Use: g_m = I_C/V_T.

  • g_m = 0.002/0.02585.

  • g_m ≈ 0.07737 S.

The transconductance is approximately 77.4 mS.

A BJT has a collector current of 5 mA at a temperature where the thermal voltage is 26 mV. Determine its transconductance.

  • Given: I_C = 0.005 A and V_T = 0.026 V.

  • g_m = 0.005/0.026.

  • g_m ≈ 0.1923 S.

The transconductance is approximately 192.3 mS.

Real-world applications

  • Small-signal BJT amplifier design

  • Differential amplifier analysis

  • Analog integrated-circuit design

  • Transistor gain estimation

  • Bias-point and frequency-response analysis

Formula Meaning

BJT transconductance measures how strongly a small change in base-emitter voltage changes the collector current at a specified operating point. For an ideal BJT in forward-active operation, it equals collector current divided by thermal voltage.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source