The long-channel MOSFET triode-region equation estimates drain current when the gate-source voltage exceeds the threshold voltage and the drain-source voltage is smaller than the gate overdrive voltage.
MOSFET Drain Current (Triode Region)
The long-channel MOSFET triode-region equation estimates drain current when the gate-source voltage exceeds the threshold voltage and the drain-source voltage is smaller than the gate overdrive voltage.
\(I_{\mathrm{D}} = \mu_{\mathrm{n}} C_{\mathrm{ox}} (W/L)[(V_{\mathrm{GS}} - V_{\mathrm{TH}})V_{\mathrm{DS}} - V_{\mathrm{DS}}^{2}/2]\)
What this formula means
Scientific principle
Principle
In the triode or linear region, an inversion channel exists along the MOSFET surface from source to drain. The channel charge varies with position, producing a drain current that depends on both gate overdrive and drain-source voltage.
Derivation
1. Define the gate overdrive voltage as V_OV = V_GS − V_TH.
2. Under the gradual-channel approximation, the local inversion charge magnitude per unit area is approximately Q_i(x) = −C_ox[V_OV − V(x)].
3. The drift current is obtained by combining channel charge, carrier mobility, channel width, and the lateral electric field.
4. Integrating the channel current from source to drain gives I_D = μ_n C_ox(W/L)[V_OV V_DS − V_DS²/2].
5. Substituting V_OV = V_GS − V_TH gives the final triode-region expression.
Final Result
I_D = μ_n C_ox (W/L)[(V_GS − V_TH)V_DS − V_DS²/2]
Region Condition
V_GS > V_TH and 0 ≤ V_DS < V_GS − V_TH
Low Voltage Approximation
When V_DS is much smaller than V_OV, I_D ≈ μ_n C_ox(W/L)V_OVV_DS.
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
I_D | Drain current | A |
μ_n | Electron mobility in the channel | m²/(V·s) |
C_ox | Gate-oxide capacitance per unit area | F/m² |
W | Channel width | m |
L | Channel length | m |
V_GS | Gate-to-source voltage | V |
V_TH | Threshold voltage | V |
V_DS | Drain-to-source voltage | V |
V_OV | Gate overdrive voltage, V_GS − V_TH | V |
SI units and conversions
Drain Current
A
Mobility
m²/(V·s)
Oxide Capacitance Per Area
F/m²
Length
m
Voltage
V
Dimensional Formula
Drain current: [I]
Conditions of use
The equation is for a conventional long-channel n-channel enhancement MOSFET.
The gate-source voltage must exceed the threshold voltage.
The drain-source voltage must satisfy 0 ≤ V_DS < V_OV for the stated operating convention.
The gradual-channel approximation should be reasonably valid.
The channel is assumed to be formed and operated without significant breakdown or other non-ideal effects.
Limitations and assumptions
The equation assumes a long-channel device and constant carrier mobility.
Short-channel effects, velocity saturation, mobility degradation, and channel-length modulation are not included.
Body effect can change the threshold voltage if the source and body are at different potentials.
The expression is not the appropriate saturation-region equation.
For a p-channel MOSFET, voltage and current polarities must be adapted to the chosen sign convention.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A long-channel nMOS has μ_nC_ox(W/L) = 1 mA/V², V_GS = 3 V, V_TH = 1 V, and V_DS = 0.5 V. Calculate its triode-region drain current. |
| The drain current is 0.875 mA. |
A MOSFET has μ_nC_ox(W/L) = 2 mA/V², V_GS = 4 V, V_TH = 1.5 V, and V_DS = 1 V. Find the drain current. |
| The drain current is 4 mA. |
Real-world applications
MOSFET switch analysis
Analog voltage-controlled resistor circuits
CMOS transistor modelling
Integrated-circuit design
Low-voltage MOSFET operation
Formula Meaning
The long-channel MOSFET triode-region equation estimates drain current when the gate-source voltage exceeds the threshold voltage and the drain-source voltage is smaller than the gate overdrive voltage.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.