Photodiode responsivity measures the photocurrent produced per unit incident optical power at a specified wavelength. The quantum-efficiency expression gives the ideal relationship between responsivity and wavelength.
Photodiode Responsivity
Photodiode responsivity measures the photocurrent produced per unit incident optical power at a specified wavelength. The quantum-efficiency expression gives the ideal relationship between responsivity and wavelength.
\(R_\lambda = I_{\mathrm{ph}}/P_{\mathrm{opt}} = \eta q\lambda/(hc)\)
What this formula means
Scientific principle
Principle
Incident photons generate electron-hole pairs in a photodiode. The resulting collected charge produces photocurrent. Responsivity describes how effectively optical power is converted into electrical current.
Derivation
1. The energy of one incident photon is E_ph = hc/λ.
2. The number of incident photons per second is Ṅ = P_opt/E_ph.
3. If the external quantum efficiency is η, the collected electron rate is ηṄ.
4. Each collected electron contributes charge q, so I_ph = ηqṄ.
5. Substituting Ṅ = P_optλ/(hc) gives I_ph = ηqP_optλ/(hc).
6. Dividing by optical power gives R_λ = I_ph/P_opt = ηqλ/(hc).
Final Result
R_λ = I_ph/P_opt = ηqλ/(hc)
Quantum Efficiency Relation
η = R_λhc/(qλ)
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
R_λ | Photodiode responsivity at wavelength λ | A/W |
I_ph | Photocurrent | A |
P_opt | Incident optical power | W |
η | External quantum efficiency, expressed as a fraction | Dimensionless |
q | Magnitude of elementary charge, approximately 1.602176634 × 10⁻¹⁹ | C |
λ | Incident light wavelength in vacuum | m |
h | Planck’s constant | J·s |
c | Speed of light in vacuum | m/s |
SI units and conversions
Responsivity
A/W
Photocurrent
A
Optical Power
W
Wavelength
m
Dimensional Formula
Responsivity: [I M⁻¹ L⁻² T³]
Conditions of use
The wavelength and optical power should correspond to the same measurement conditions.
Quantum efficiency η must be expressed as a fraction, such as 0.80 rather than 80.
The ideal relation assumes one collected electron per successful photon-generated charge event, represented statistically by η.
The detector should operate within its linear optical-power range.
Dark current should be separated from photocurrent when using measured total current.
Limitations and assumptions
Responsivity varies with wavelength because absorption and carrier collection efficiency vary across the detector's spectral response.
Real photodiodes may have reflection losses, incomplete absorption, recombination, and carrier-collection losses.
The expression does not include avalanche multiplication in an avalanche photodiode.
At high optical power, saturation and heating can cause deviations from linear response.
The measured current may contain dark current and other leakage components.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A photodiode receives 100 μW of optical power and produces 60 μA of photocurrent. Calculate its responsivity. |
| The photodiode responsivity is 0.60 A/W. |
A photodiode has an external quantum efficiency of 85% at a wavelength of 800 nm. Estimate its ideal responsivity. |
| The ideal responsivity is approximately 0.549 A/W. |
Real-world applications
Optical communication receivers
Light-intensity measurement
Photodetection systems
Optical instrumentation
Spectral detector characterization
Formula Meaning
Photodiode responsivity measures the photocurrent produced per unit incident optical power at a specified wavelength. The quantum-efficiency expression gives the ideal relationship between responsivity and wavelength.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.