✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1538

Instrumentation Amplifier Gain

The ideal voltage gain of a common three-op-amp instrumentation amplifier is determined by the first-stage gain-setting resistor and the resistor ratio in the differential output stage. For a matched difference-amplifier stage, the overall gain is the product of the two stage gains.

\(A_{\mathrm{v}} = (1 + 2R/R_{\mathrm{G}})(R_3/R_2)\)

What this formula means

The ideal voltage gain of a common three-op-amp instrumentation amplifier is determined by the first-stage gain-setting resistor and the resistor ratio in the differential output stage. For a matched difference-amplifier stage, the overall gain is the product of the two stage gains.

Scientific principle

Principle

An instrumentation amplifier amplifies the voltage difference between two input signals while ideally rejecting voltage common to both inputs. Its high input impedance and resistor-matched differential stage make it useful for low-level sensor signals.

Derivation

  • 1. In the standard three-op-amp architecture, the first stage contains two non-inverting amplifiers connected through a shared gain-setting resistor R_G.

  • 2. With matched first-stage resistors R, the differential gain of the first stage is A_1 = 1 + 2R/R_G.

  • 3. The second stage is a difference amplifier with matched resistor ratios.

  • 4. Its differential gain is A_2 = R_3/R_2.

  • 5. The overall gain is the product of the two stage gains: A_v = A_1A_2.

  • 6. Substituting gives A_v = (1 + 2R/R_G)(R_3/R_2).

Final Result

A_v = (1 + 2R/R_G)(R_3/R_2)

Output Relation

V_out = A_v(V_2 − V_1)

Special Case

If the output difference stage has unity gain, R_3 = R_2 and A_v = 1 + 2R/R_G.

Variables and their meanings

SymbolMeaningUnit

A_v

Overall differential voltage gain

Dimensionless

R

Matched first-stage feedback resistance in each input amplifier

Ω

R_G

Gain-setting resistor connecting the first-stage inverting nodes

Ω

R_2

Input resistor of the difference-amplifier stage

Ω

R_3

Feedback resistor of the difference-amplifier stage

Ω

V_1

First input voltage

V

V_2

Second input voltage

V

V_out

Output voltage

V

SI units and conversions

Voltage Gain

Dimensionless

Resistance

Ω

Voltage

V

Dimensional Formula

Voltage gain: dimensionless

Conditions of use

  • The formula applies to the standard three-op-amp instrumentation-amplifier architecture.

  • The two first-stage feedback resistors are assumed to have equal resistance R.

  • The difference-amplifier resistor ratios must be matched appropriately.

  • The op-amps must operate within their input common-mode and output voltage ranges.

  • The gain-setting resistor R_G must be positive and selected within the amplifier's permitted range.

Limitations and assumptions

  • Resistor mismatch reduces common-mode rejection and can introduce gain error.

  • Real op-amps have finite bandwidth, input offset voltage, input bias current, and finite common-mode rejection.

  • The output may saturate if the amplified differential input exceeds the available output range.

  • The formula does not automatically guarantee high CMRR; resistor matching and amplifier specifications are essential.

  • Integrated instrumentation amplifiers may use internal architectures with gain equations different from this common three-op-amp model.

Step-by-step worked examples

ProblemSolutionAnswer

A three-op-amp instrumentation amplifier has R = 10 kΩ, R_G = 2 kΩ, R_2 = 10 kΩ, and R_3 = 20 kΩ. Calculate its overall differential gain.

  • First-stage gain: A_1 = 1 + 2R/R_G.

  • A_1 = 1 + (2 × 10)/2 = 11.

  • Difference-stage gain: A_2 = R_3/R_2 = 20/10 = 2.

  • Overall gain: A_v = A_1A_2.

  • A_v = 11 × 2 = 22.

The overall differential voltage gain is 22.

An instrumentation amplifier has R = 20 kΩ, R_G = 5 kΩ, and a unity-gain output difference stage. Determine its gain.

  • For a unity-gain difference stage, R_3/R_2 = 1.

  • Use: A_v = 1 + 2R/R_G.

  • A_v = 1 + (2 × 20)/5.

  • A_v = 1 + 8.

  • A_v = 9.

The overall differential voltage gain is 9.

Real-world applications

  • Bridge-sensor signal conditioning

  • Strain-gauge measurement systems

  • Biomedical instrumentation

  • Thermocouple and low-level sensor interfaces

  • Precision data-acquisition systems

Formula Meaning

The ideal voltage gain of a common three-op-amp instrumentation amplifier is determined by the first-stage gain-setting resistor and the resistor ratio in the differential output stage. For a matched difference-amplifier stage, the overall gain is the product of the two stage gains.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source