The common-mode rejection ratio measures how strongly a differential amplifier amplifies the difference between its inputs compared with how strongly it amplifies a voltage common to both inputs. A larger CMRR indicates better common-mode signal rejection.
CMRR of a Differential Amplifier
The common-mode rejection ratio measures how strongly a differential amplifier amplifies the difference between its inputs compared with how strongly it amplifies a voltage common to both inputs. A larger CMRR indicates better common-mode signal rejection.
\(CMRR = |A_{\mathrm{d}}/A_{\mathrm{c}}|\)
What this formula means
Scientific principle
Principle
A differential amplifier should respond strongly to the difference between its two inputs and weakly to signals that are identical at both inputs. CMRR quantifies this distinction.
Derivation
1. Define the differential input voltage as V_d = V_2 − V_1.
2. Define the common-mode input voltage as V_cm = (V_1 + V_2)/2.
3. The amplifier output can be represented as V_out = A_dV_d + A_cV_cm.
4. Here A_d is differential gain and A_c is common-mode gain.
5. The common-mode rejection ratio is defined as the magnitude of the ratio of differential gain to common-mode gain.
6. Therefore, CMRR = |A_d/A_c|.
7. In decibels, CMRR_dB = 20 log₁₀|A_d/A_c|.
Final Result
CMRR = |A_d/A_c|
Decibel Relation
CMRR_dB = 20 log₁₀(CMRR)
Ideal Case
For an ideal differential amplifier, A_c = 0 and CMRR tends toward infinity.
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
CMRR | Common-mode rejection ratio | Dimensionless |
A_d | Differential voltage gain | Dimensionless |
A_c | Common-mode voltage gain | Dimensionless |
V_d | Differential input voltage, V_2 − V_1 | V |
V_cm | Common-mode input voltage, (V_1 + V_2)/2 | V |
V_1 | First input voltage | V |
V_2 | Second input voltage | V |
CMRR_dB | Common-mode rejection ratio expressed in decibels | dB |
SI units and conversions
Cmrr
Dimensionless ratio
Cmrr Decibels
dB
Gain
Dimensionless
Dimensional Formula
CMRR: dimensionless
Conditions of use
Differential and common-mode gains must be measured or specified under comparable frequency and operating conditions.
The same gain convention must be used for A_d and A_c.
For decibel conversion, use the voltage-gain ratio and the factor 20 log₁₀.
The amplifier must remain within its input common-mode range and output limits.
For frequency-dependent amplifiers, CMRR should be specified at the frequency of interest.
Limitations and assumptions
CMRR is not constant across frequency; it often decreases at higher frequencies.
Resistor mismatch, transistor mismatch, and internal device imperfections reduce practical CMRR.
A high CMRR does not prevent output errors caused by differential input noise or offset voltage.
CMRR alone does not specify input impedance, noise level, or output swing.
The ideal infinite-CMRR case is theoretical because practical amplifiers always have some common-mode response.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A differential amplifier has a differential gain of 100 and a common-mode gain of 0.01. Calculate its CMRR and CMRR in decibels. |
| The CMRR is 10,000, equivalent to 80 dB. |
An amplifier has a differential gain of 500 and a CMRR of 60 dB. Determine its common-mode gain magnitude. |
| The common-mode gain magnitude is 0.5. |
Real-world applications
Differential amplifier performance evaluation
Instrumentation amplifier selection
Common-mode noise rejection
Biomedical signal acquisition
Precision sensor measurement systems
Formula Meaning
The common-mode rejection ratio measures how strongly a differential amplifier amplifies the difference between its inputs compared with how strongly it amplifies a voltage common to both inputs. A larger CMRR indicates better common-mode signal rejection.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.