The ADC quantization step size is the approximate input-voltage interval represented by one digital code. For an N-bit ideal analog-to-digital converter, the input range is divided into 2ᴺ quantization intervals.
ADC Quantization Step Size
The ADC quantization step size is the approximate input-voltage interval represented by one digital code. For an N-bit ideal analog-to-digital converter, the input range is divided into 2ᴺ quantization intervals.
\(\Delta = (V_{\max} - V_{\mathrm{min}})/2N\)
What this formula means
Scientific principle
Principle
An analog-to-digital converter converts a continuous input voltage into a finite set of digital codes. Since only a limited number of codes are available, nearby analog values are represented by the same code, creating quantization.
Derivation
1. An N-bit ADC can represent 2ᴺ distinct digital codes.
2. Let the input voltage range extend from V_min to V_max.
3. The total input range is V_FS = V_max − V_min.
4. Dividing the input range into 2ᴺ quantization intervals gives the nominal step size.
5. Therefore, Δ = (V_max − V_min)/2ᴺ.
6. For an ideal uniform quantizer with rounding, the maximum quantization error is approximately ±Δ/2, excluding overload and endpoint conventions.
Final Result
Δ = V_FS/2ᴺ
Quantization Error
−Δ/2 ≤ e_q ≤ Δ/2
Resolution Relation
Number of quantization levels = 2ᴺ
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
Δ | Quantization step size or nominal LSB interval | V |
V_FS | Full-scale input range, V_max − V_min | V |
V_max | Maximum input-range voltage | V |
V_min | Minimum input-range voltage | V |
N | ADC resolution in bits | bit |
e_q | Quantization error | V |
SI units and conversions
Step Size
V
Input Range
V
Resolution
bit
Dimensional Formula
Voltage: [M L² T⁻³ I⁻¹]
Conditions of use
The ADC is assumed to have N-bit resolution and 2ᴺ quantization levels.
The converter is assumed to use uniform quantization.
V_FS must represent the actual configured analog input range.
The formula assumes ideal quantization and does not include gain, offset, or nonlinearity errors.
The distinction between quantization intervals and the difference between endpoint code values must be maintained.
Limitations and assumptions
Some ADC specifications define code spacing using endpoint conventions involving 2ᴺ − 1; the exact convention should be checked in the datasheet.
The formula does not include thermal noise, reference-voltage noise, or sampling noise.
Actual effective resolution can be lower than nominal bit resolution.
Input voltages outside the permitted range can cause clipping or overload.
The quantization-error bound assumes ideal rounding; truncation can produce a different error interval.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
An ideal 12-bit ADC has an input range from 0 V to 5 V. Calculate its nominal quantization step size. |
| The nominal quantization step size is approximately 1.221 mV. |
An ideal 10-bit ADC operates over a 0–3.3 V input range. Determine its quantization step size and ideal rounding-error bound. |
| The nominal step size is approximately 3.223 mV, with an ideal rounding-error bound of ±1.611 mV. |
Real-world applications
Digital sensor interfaces
Data-acquisition systems
Audio recording and processing
Microcontroller analog-input systems
Measurement-instrument resolution analysis
Formula Meaning
The ADC quantization step size is the approximate input-voltage interval represented by one digital code. For an N-bit ideal analog-to-digital converter, the input range is divided into 2ᴺ quantization intervals.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.