✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1542

DAC Resolution

DAC resolution describes the smallest nominal output-voltage increment associated with a one-code change in an ideal N-bit digital-to-analog converter. For a unipolar DAC with a zero-based code range, the conventional LSB size is approximately the reference or full-scale range divided by 2ᴺ.

\(\Delta V_{\mathrm{DAC}} \approx V_{\mathrm{FS}}/2N\)

What this formula means

DAC resolution describes the smallest nominal output-voltage increment associated with a one-code change in an ideal N-bit digital-to-analog converter. For a unipolar DAC with a zero-based code range, the conventional LSB size is approximately the reference or full-scale range divided by 2ᴺ.

Scientific principle

Principle

A digital-to-analog converter maps each digital input code to an analog output level. Increasing the number of bits increases the number of available output levels and reduces the voltage difference between adjacent codes.

Derivation

  • 1. An N-bit DAC has 2ᴺ possible digital input codes.

  • 2. Let the output span be V_FS.

  • 3. The conventional ideal LSB increment is the output span divided by the number of code intervals represented by the binary scaling.

  • 4. Therefore, the nominal output increment is ΔV_DAC = V_FS/2ᴺ.

  • 5. For a common unipolar DAC with reference voltage V_ref, the ideal output is V_out = D V_ref/2ᴺ, where D is the unsigned digital code.

  • 6. The highest code is 2ᴺ − 1, so its output is one LSB below V_ref in this convention.

Final Result

ΔV_DAC = V_FS/2ᴺ

Unipolar Output Relation

V_out = D V_ref/2ᴺ

Maximum Code

D_max = 2ᴺ − 1

Maximum Output

V_out,max = (2ᴺ − 1)V_ref/2ᴺ

Variables and their meanings

SymbolMeaningUnit

ΔV_DAC

Nominal output-voltage increment or LSB size

V

V_FS

DAC output range or reference span

V

N

DAC resolution

bit

V_ref

Reference voltage

V

D

Unsigned digital input code

Dimensionless integer

SI units and conversions

Resolution

bit

Voltage Increment

V

Digital Code

Dimensionless

Dimensional Formula

Voltage: [M L² T⁻³ I⁻¹]

Conditions of use

  • The DAC is assumed to have an ideal uniform output scale.

  • The resolution N must represent the number of input bits.

  • The reference voltage or output span must be defined clearly.

  • The stated unipolar output equation assumes codes from 0 to 2ᴺ − 1.

  • The output increment should be distinguished from the highest achievable output voltage.

Limitations and assumptions

  • Some DAC architectures use different offset, gain, or endpoint conventions.

  • Actual output levels are affected by integral nonlinearity, differential nonlinearity, offset error, and gain error.

  • The formula does not describe settling time, glitch energy, or output noise.

  • A higher nominal bit count does not guarantee the same number of noise-free effective bits.

  • Bipolar DACs require a clearly specified coding and output-range convention.

Step-by-step worked examples

ProblemSolutionAnswer

An ideal 8-bit unipolar DAC uses a 5 V reference. Calculate its nominal LSB voltage increment.

  • Given: N = 8 and V_ref = 5 V.

  • Number of codes = 2⁸ = 256.

  • Use: ΔV_DAC = V_ref/2ᴺ.

  • ΔV_DAC = 5/256.

  • ΔV_DAC ≈ 0.01953125 V.

The nominal DAC resolution is approximately 19.53 mV per LSB.

A 12-bit unipolar DAC has a 3.3 V reference. Calculate its ideal output for digital code D = 2048.

  • Given: N = 12, V_ref = 3.3 V, D = 2048.

  • Use: V_out = D V_ref/2ᴺ.

  • V_out = (2048 × 3.3)/4096.

  • V_out = 3.3/2.

  • V_out = 1.65 V.

The ideal DAC output is 1.65 V.

Real-world applications

  • Audio digital-to-analog conversion

  • Microcontroller waveform generation

  • Programmable voltage references

  • Industrial control outputs

  • Signal reconstruction systems

Formula Meaning

DAC resolution describes the smallest nominal output-voltage increment associated with a one-code change in an ideal N-bit digital-to-analog converter. For a unipolar DAC with a zero-based code range, the conventional LSB size is approximately the reference or full-scale range divided by 2ᴺ.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source