The transfer function of a linear time-invariant system is the ratio of the Laplace transform of its output to the Laplace transform of its input, assuming zero initial conditions.
Transfer Function Definition
The transfer function of a linear time-invariant system is the ratio of the Laplace transform of its output to the Laplace transform of its input, assuming zero initial conditions.
\(G(s) = Y(s)/U(s)\)
What this formula means
Scientific principle
Principle
A transfer function describes the input-output behaviour of a linear time-invariant system in the Laplace domain. It represents the system's dynamic characteristics independently of a particular input waveform.
Derivation
1. Consider a linear time-invariant system described by a constant-coefficient differential equation.
2. Take the Laplace transform of the differential equation.
3. With zero initial conditions, time derivatives become powers of the Laplace variable s.
4. Rearrange the transformed equation to express output transform Y(s) in terms of input transform U(s).
5. The ratio of output to input transforms defines the transfer function.
6. Therefore, G(s) = Y(s)/U(s), with zero initial conditions.
Final Result
G(s) = Y(s)/U(s)
General Differential Equation
aₙy⁽ⁿ⁾ + ⋯ + a₁ẏ + a₀y = bₘu⁽ᵐ⁾ + ⋯ + b₁u̇ + b₀u
Polynomial Form
G(s) = (bₘsᵐ + ⋯ + b₁s + b₀)/(aₙsⁿ + ⋯ + a₁s + a₀)
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
G(s) | System transfer function | Depends on output and input quantities |
Y(s) | Laplace transform of the system output | Output-unit × s |
U(s) | Laplace transform of the system input | Input-unit × s |
s | Complex Laplace variable, s = σ + jω | s⁻¹ |
y(t) | Time-domain output signal | Depends on system |
u(t) | Time-domain input signal | Depends on system |
SI units and conversions
Transfer Function
Output unit divided by input unit
Laplace Variable
s⁻¹
Dimensional Formula
Depends on the physical input-output relationship
Conditions of use
The system must be linear and time-invariant for the standard transfer-function framework.
The transfer function is defined using zero initial conditions.
Input and output variables must be clearly identified.
The Laplace transforms must exist in an appropriate region of convergence.
The system model must include the relevant dynamics and parameter values.
Limitations and assumptions
A transfer function does not by itself describe the response caused by nonzero initial conditions.
Nonlinear and time-varying systems generally cannot be represented by a single ordinary transfer function.
A transfer function describes a selected input-output relationship and may not reveal internal states that are unobservable at that output.
The same transfer function can correspond to different internal state-space realizations.
Stability cannot be inferred from the numerator alone; poles and the system's region of convergence must be considered.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A system has an output transform Y(s) = 10U(s)/(s + 2). Determine its transfer function. |
| The transfer function is G(s) = 10/(s + 2). |
A system is described by 2ÿ + 5ẏ + 3y = 4u, with zero initial conditions. Find its transfer function. |
| The transfer function is G(s) = 4/(2s² + 5s + 3). |
Real-world applications
Control-system modelling
Mechanical vibration analysis
Electrical circuit analysis
Industrial process control
Dynamic system simulation
Formula Meaning
The transfer function of a linear time-invariant system is the ratio of the Laplace transform of its output to the Laplace transform of its input, assuming zero initial conditions.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.