✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1545

Open-Loop Gain Margin

Gain margin measures how much the magnitude of the open-loop loop gain can increase before a standard negative-feedback system reaches the critical stability condition at its phase-crossover frequency.

\(GM = 1/|L(j\omega_{\mathrm{pc}})|\)

What this formula means

Gain margin measures how much the magnitude of the open-loop loop gain can increase before a standard negative-feedback system reaches the critical stability condition at its phase-crossover frequency.

Scientific principle

Principle

In frequency-domain stability analysis, the open-loop frequency response is examined to estimate how close a feedback system is to the critical point −1 in the complex plane. At the phase-crossover frequency, the loop-gain phase is −180° under the usual convention. Gain margin measures the additional gain factor required for the loop magnitude to reach unity at that frequency.

Derivation

  • 1. Define the open-loop loop transfer function as L(s) = G(s)H(s).

  • 2. Evaluate its frequency response at s = jω.

  • 3. The phase-crossover frequency ω_pc satisfies ∠L(jω_pc) = −180° under the usual phase convention.

  • 4. At this frequency, the critical loop magnitude for the conventional stability boundary is 1.

  • 5. The gain multiplication required to reach that magnitude is the reciprocal of the present magnitude.

  • 6. Therefore, GM = 1/|L(jω_pc)|.

  • 7. Expressing the ratio in decibels gives GM_dB = −20 log₁₀|L(jω_pc)|.

Final Result

GM = 1/|L(jω_pc)|

Decibel Relation

GM_dB = 20 log₁₀(GM) = −20 log₁₀|L(jω_pc)|

Phase Crossover Condition

∠L(jω_pc) = −180°

Variables and their meanings

SymbolMeaningUnit

GM

Open-loop gain margin as a linear gain factor

Dimensionless

GM_dB

Gain margin in decibels

dB

L(s)

Open-loop loop transfer function G(s)H(s)

Dimensionless for a properly scaled loop

G(s)

Forward-path transfer function

Depends on system signals

H(s)

Feedback-path transfer function

Depends on system signals

ω_pc

Phase-crossover angular frequency

rad/s

SI units and conversions

Gain Margin

Dimensionless

Gain Margin Decibels

dB

Angular Frequency

rad/s

Dimensional Formula

Gain margin: dimensionless

Conditions of use

  • The loop transfer function must be defined as L(s) = G(s)H(s).

  • The phase-crossover frequency must be identified from the open-loop frequency response.

  • The usual negative-feedback convention and phase reference must be used consistently.

  • The formula assumes a meaningful phase-crossover point exists.

  • For multiple crossover frequencies, all relevant crossings must be examined.

Limitations and assumptions

  • Gain margin alone is not a complete stability guarantee for every system.

  • Systems with multiple crossovers or open-loop right-half-plane poles require careful stability analysis.

  • A phase-crossover frequency may not exist, in which case the margin requires special interpretation.

  • Time delays, nonlinearities, and unmodelled dynamics can alter practical stability.

  • Nyquist analysis provides a more complete stability assessment when simple margin interpretation is insufficient.

Step-by-step worked examples

ProblemSolutionAnswer

At the phase-crossover frequency, a system has an open-loop magnitude of 0.25. Calculate its gain margin in linear form and decibels.

  • Given: |L(jω_pc)| = 0.25.

  • Use: GM = 1/|L(jω_pc)|.

  • GM = 1/0.25 = 4.

  • Convert to decibels: GM_dB = 20 log₁₀(4).

  • GM_dB ≈ 12.04 dB.

The gain margin is 4, or approximately 12.04 dB.

A system has a gain margin of 6 dB. Determine the corresponding linear gain factor.

  • Given: GM_dB = 6 dB.

  • Use: GM = 10^(GM_dB/20).

  • GM = 10^(6/20).

  • GM ≈ 1.995.

The linear gain margin is approximately 2.0.

Real-world applications

  • Feedback-control stability analysis

  • Industrial controller tuning

  • Servo-system design

  • Power-electronics control loops

  • Frequency-response and Bode-plot analysis

Formula Meaning

Gain margin measures how much the magnitude of the open-loop loop gain can increase before a standard negative-feedback system reaches the critical stability condition at its phase-crossover frequency.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source