✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1547

Complementary Sensitivity Function

The complementary sensitivity function describes the closed-loop transfer relationship associated with the loop gain in a standard negative-feedback system. It is commonly used to analyze reference tracking and the transmission of certain measurement disturbances and high-frequency noise.

\(T(s) = L(s)/[1 + L(s)]\)

What this formula means

The complementary sensitivity function describes the closed-loop transfer relationship associated with the loop gain in a standard negative-feedback system. It is commonly used to analyze reference tracking and the transmission of certain measurement disturbances and high-frequency noise.

Scientific principle

Principle

A feedback-control system divides its response between the sensitivity function and the complementary sensitivity function. The complementary sensitivity function describes how the loop gain is transmitted through the closed-loop system.

Derivation

  • 1. Define the loop transfer function as L(s) = G(s)H(s).

  • 2. The standard negative-feedback closed-loop transfer function is T(s) = G(s)/[1 + G(s)H(s)] when the output is measured before the feedback block.

  • 3. Multiplying the transfer function by H(s) gives H(s)T(s) = G(s)H(s)/[1 + G(s)H(s)].

  • 4. Substitute L(s) = G(s)H(s).

  • 5. The complementary sensitivity function is therefore T_c(s) = L(s)/[1 + L(s)].

  • 6. Since S(s) = 1/[1 + L(s)], their sum is S(s) + T_c(s) = 1.

Final Result

T_c(s) = L(s)/[1 + L(s)]

Sensitivity Identity

S(s) + T_c(s) = 1

Unity Feedback Case

For H(s) = 1, T_c(s) = G(s)/[1 + G(s)].

Variables and their meanings

SymbolMeaningUnit

T_c(s)

Complementary sensitivity function

Dimensionless

L(s)

Open-loop loop transfer function G(s)H(s)

Dimensionless for a properly scaled loop

S(s)

Sensitivity function

Dimensionless

G(s)

Forward-path transfer function

Depends on system signals

H(s)

Feedback-path transfer function

Depends on system signals

SI units and conversions

Complementary Sensitivity

Dimensionless

Loop Gain

Dimensionless for a properly scaled loop

Dimensional Formula

Dimensionless

Conditions of use

  • The standard negative-feedback loop structure must be used.

  • The loop transfer function must be defined as L(s) = G(s)H(s).

  • The relationship must use a consistent output and feedback measurement convention.

  • The system is assumed to be linear and time-invariant.

  • Transfer-function calculations assume zero initial conditions.

Limitations and assumptions

  • The physical interpretation of T_c depends on where disturbances enter the feedback system.

  • A small complementary sensitivity magnitude does not imply good reference tracking at that frequency.

  • High-frequency measurement noise can be transmitted through the complementary sensitivity path.

  • The identity S + T_c = 1 is algebraic and does not itself guarantee stability.

  • Trade-offs between tracking, disturbance rejection, noise attenuation, and robustness must be considered together.

Step-by-step worked examples

ProblemSolutionAnswer

A control system has loop gain L(s) = 4 at a particular frequency. Calculate its complementary sensitivity and sensitivity values.

  • Given: L = 4.

  • Complementary sensitivity: T_c = L/(1 + L).

  • T_c = 4/(1 + 4) = 0.8.

  • Sensitivity: S = 1/(1 + L) = 1/5 = 0.2.

  • Check: S + T_c = 0.2 + 0.8 = 1.

The complementary sensitivity is 0.8 and the sensitivity is 0.2.

A feedback system has loop gain L = 19 at a specified frequency. Determine its complementary sensitivity.

  • Use: T_c = L/(1 + L).

  • T_c = 19/(1 + 19).

  • T_c = 19/20.

  • T_c = 0.95.

The complementary sensitivity is 0.95.

Real-world applications

  • Reference-tracking analysis

  • Measurement-noise transmission analysis

  • Robust control design

  • Feedback-loop bandwidth design

  • Control-system sensitivity trade-off analysis

Formula Meaning

The complementary sensitivity function describes the closed-loop transfer relationship associated with the loop gain in a standard negative-feedback system. It is commonly used to analyze reference tracking and the transmission of certain measurement disturbances and high-frequency noise.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source